Hi again and sorry for spamming this list with thing that may not be VDR related, I just discovered.... It seems there's something strange about this transponder since tzap -r doesn't work. I get a lock with tzap, I can watch the channels in VDR but I get no output on /dev/dvb/adapterX/dvr0 then tzap'ing to 506 MHz. On all other transponders I get a stream on dvr0. So I guess this is a question for linuxtv rather than VDR. Scan finds some strange channels that don't provide a name on this frequency:

[04b0]:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRAN SMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:1200:3 [0316]:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRAN SMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:790:3 [0320]:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRAN SMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:800:3 Boxer Navigator:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:T RANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:65534:3 [0302]:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRAN SMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:770:3 [02ee]:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRAN SMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:750:3 BBC World News:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSM ISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:560:3 Discovery T&L:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMI SSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:570:3 Discovery Science:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRA NSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:580:3 Disney XD:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMIS SION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:590:3 Showtime:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TR ANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:600:3 7:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISS ION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:810:3 Star!:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANS MISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:960:3

/Magnus H

-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Magnus H Sent: den 12 mars 2010 09:27 To: vdr@linuxtv.org Subject: [vdr] VDR doesn't add new h264 SD DVB-T channels

Hi. Since february there are some new h264 SD channels in the Swedish DVB-T network. I have my VDR 1.7.13 setup to automatically add transponders and channels and that has always worked before, both on DVB-T and -S/S2. However, if I manually add one channel on this new frequency:

Discovery T&L;Discovery Communications:506000000:B8C23G8M64T8Y0:T:27500:489=27:0:0:0:570:8945:1026:0

, containing:

Stream #0.0[0x1e9]: Video: h264, yuv420p, 544x576 [PAR 64:33 DAR 544:297], 25 fps, 25 tbr, 90k tbn, 50 tbc Stream #0.1[0x1e8](swe): Audio: aac, 32000 Hz, 5 channels, s16, 295 kb/s

, it works just fine. But no other channels are automatically added. Can someone point me to where in the VDR code I should look to add some debug prints?

/Magnus H

_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr