Hi,
a new version of the rotor plugin is available: http://home.vrweb.de/bergwinkl.thomas/
2005-09-05: Version 0.1.1
- for the plugin a patch for vdr is now mandatory: vdr-1.3.31-Rotor.diff - you can now select to which cards should be reacted on channelswitch if GotoX is activated - 'Scan Transonder' shows all channel, which could be found, in a new window - added svdrp commands
Thomas
Hi. I have question about rotor "drive" command. It seems like "halt" command (OK button?) not working on my system (VDR-1.3.30, Skystar2, xine and rotor-0.1.1 plugins, SuperJack DG-120 motor) and motor continue driving to the end. Same problem occurs with older rotor plugin (0.1.0) too. Or may be something wrong in my understanding?
And one suggestion too. Is it possible to implement command "goto 0" or "reset" to plugin menu? Sometimes motor lost itself and only goto null position helps.
Regards, SK
Suur Karu wrote:
I have question about rotor "drive" command. It seems like "halt" command (OK button?) not working on my system (VDR-1.3.30, Skystar2, xine and rotor-0.1.1 plugins, SuperJack DG-120 motor) and motor continue driving to the end. Same problem occurs with older rotor plugin (0.1.0) too. Or may be something wrong in my understanding?
It should work the way you described it. It is working for me, when the cursor is on halt and I press OK my motor stops. Does the ok button work on other items like 'Scan Transponder' in the plugin menu?
And one suggestion too. Is it possible to implement command "goto 0" or "reset" to plugin menu? Sometimes motor lost itself and only goto null position helps.
You can type in position 0 (just press 0 when you are at the line with Position: xx) and than press the green button (Goto).
Thomas
Thomas Bergwinkl wrote:
It should work the way you described it. It is working for me, when the cursor is on halt and I press OK my motor stops. Does the ok button work on other items like 'Scan Transponder' in the plugin menu?
After enabling "repeat diseqc commands" it works now more stable.
You can type in position 0 (just press 0 when you are at the line with Position: xx) and than press the green button (Goto).
Thanks.
SK
-
Suur Karu -
Thomas Bergwinkl