Have you an old TPS SmartCard or a recent one (Model W or X).
vdr and other terminal (with CAM modules) works only with W or X models, whilst the TPS reciever can handle old ones.
Message du 05/09/06 00:13 De : "Marco Göbenich" mg@vierzehn.com A : "VDR Mailing List" vdr@linuxtv.org Copie à : Objet : Re: [vdr] TF1 problem [was: Viaccess Cam Update]
Hi!
This would not work while my original TPS receiver has only a slot for the smartcard, not for a CAM.
Has nobody else problems to receive TF1?
Am I the first person who tries to update CAM firmware with VDR?
Regards
Marco
Gregoire Favre schrieb:
On Mon, Sep 04, 2006 at 11:47:15AM +0200, Marco Göbenich wrote:
Has nobody a glue on this!
Take your CAM, put it on an official TPS receiver, tune on it to the specified transponder, wait... and take your CAM back to your VDR box...
I haven't tested it, but I am quiete certain it should work :-)
-- vierzehn Bahnhofstr. 27 Telefon 0 26 32 / 98 98 - 120 public relations 56626 Andernach Telefax 0 26 32 / 98 98 - 111 GmbH & Co. KG E-Mail: mg@vierzehn.com
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi!
Thanks or your answer! First how to find out which Smartcard I got, I can't find any label on the card and the vdr CAM setup doesn't show something about X or W models. And second, the TPS card worked without problems until some weeks ago, I thought there has been an change in the encryption algorythm and therefore I thought I have to update my CAM, but that does as described not work.
Regards
Marco
Pierre JUHEN schrieb:
Have you an old TPS SmartCard or a recent one (Model W or X).
vdr and other terminal (with CAM modules) works only with W or X models, whilst the TPS reciever can handle old ones.
Message du 05/09/06 00:13 De : "Marco Göbenich" mg@vierzehn.com A : "VDR Mailing List" vdr@linuxtv.org Copie à : Objet : Re: [vdr] TF1 problem [was: Viaccess Cam Update]
Hi!
This would not work while my original TPS receiver has only a slot for the smartcard, not for a CAM.
Has nobody else problems to receive TF1?
Am I the first person who tries to update CAM firmware with VDR?
Regards
Marco
Gregoire Favre schrieb:
On Mon, Sep 04, 2006 at 11:47:15AM +0200, Marco Göbenich wrote:
Has nobody a glue on this!
Take your CAM, put it on an official TPS receiver, tune on it to the specified transponder, wait... and take your CAM back to your VDR box...
I haven't tested it, but I am quiete certain it should work :-)
-- vierzehn Bahnhofstr. 27 Telefon 0 26 32 / 98 98 - 120 public relations 56626 Andernach Telefax 0 26 32 / 98 98 - 111 GmbH & Co. KG E-Mail: mg@vierzehn.com
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi!
Thanks or your answer! First how to find out which Smartcard I got, I can't find any label on the card and the vdr CAM setup doesn't show something about X or W models. And second, the TPS card worked without problems until some weeks ago, I thought there has been an change in the encryption algorythm and therefore I thought I have to update my CAM, but that does as described not work.
Regards
Marco
Pierre JUHEN wrote:
Have you an old TPS SmartCard or a recent one (Model W or X).
vdr and other terminal (with CAM modules) works only with W or X models, whilst the TPS reciever can handle old ones.