VDR developer version 1.7.22 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff
MD5 checksums:
b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2 868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff
WARNING: ========
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.21:
- Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't return actual values (thanks to Luca Olivetti). - The DiSEqC codes are now copied in the call to cDiseqc::Execute(). - VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on the "unicable" patch from Lars Hanisch). Since "Unicable" is a registered trademark and stands for only one of many implementations of SCR, the following changes have been made compared to the patch, which need to be taken into account by people who have set up their system using the patch: - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr"). - The configuration file name has been changed from "unicable.conf" to "scr.conf". - Updated sources.conf (thanks to Arthur Konovalov). - The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans). - Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks to Rolf Ahrenberg). - Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans). - Fixed setting the start time of an edited recording (thanks to Christoph Haubrich). - Temporarily switching free devices to transponders in order to have their running status updated is now done by marking the devices as "occupied" for a certain amount of time. - The new setup options "LNB/Device n connected to sat cable" can be used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options. - Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - The new SVDRP command UPDR can be used to trigger an update of the list of recordings (thanks to Lars Hanisch). - Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä). - Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä). - Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks to Ville Skyttä). - Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg). - Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg). - Fixed a crash with malformed SI data (patch from vdr-portal).
Have fun!
Klaus
On 04.12.2011 18:56, Ville Skyttä wrote:
On 12/04/2011 05:53 PM, Klaus Schmidinger wrote:
The changes since version 1.7.21:
[...]
- Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä).
svdrpsend.pl still has the .pl suffix...
Gee, I could have sworn I got them all...
Changed for 1.7.23.
Klaus
- The new setup options "LNB/Device n connected to sat cable" can be
used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options.
Hello Klaus, I have much trouble with the new added Feature from above. My vdr have a S2-6400 card and 1 cable with an splitter for the 2 frondends. I have set up the options correctly. But, specifically on Pro7, the picture and sound freeze after some seconds. The vdr-log show in this moment lines like this:
Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1435 from 511+511=2:512=deu@3;515=deu@106:0:32 to 511+511=2:512=deu@3,513=eng@3;515=deu@106:0:32 Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1440 from 2815+2815=2:2816=deu@3;2819=deu@106:0:32 to 2815+2815=2:2816=deu@3,2817=eng@3;2819=deu@106:0:32 Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1512 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32 Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1513 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32 Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1514 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106:0:32 Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1511 from 511+511=27:0;515=deu@106,516=eng@106:0:32 to 511+511=27:0;515=deu@106,516=eng@106:0:32 Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1444 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32 Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1442 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32 Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1441 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106,1284=eng@106:0:32 Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1443 from 1535+1535=27:0;1539=deu@106:0:32 to 1535+1535=27:0;1539=deu@106:0:32
With the LNBSHARE patch and vdr-1.7.21 I had no problems like this.
How can I fix this?
Thanks, Detlef.
On 05.12.2011 20:42, Detlef Heine wrote:
- The new setup options "LNB/Device n connected to sat cable" can be
used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options.
Hello Klaus, I have much trouble with the new added Feature from above. My vdr have a S2-6400 card and 1 cable with an splitter for the 2 frondends. I have set up the options correctly. But, specifically on Pro7, the picture and sound freeze after some seconds. The vdr-log show in this moment lines like this:
Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1435 from 511+511=2:512=deu@3;515=deu@106:0:32 to 511+511=2:512=deu@3,513=eng@3;515=deu@106:0:32 Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1440 from 2815+2815=2:2816=deu@3;2819=deu@106:0:32 to 2815+2815=2:2816=deu@3,2817=eng@3;2819=deu@106:0:32 Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1512 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32 Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1513 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32 Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1514 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106:0:32 Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1511 from 511+511=27:0;515=deu@106,516=eng@106:0:32 to 511+511=27:0;515=deu@106,516=eng@106:0:32 Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1444 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32 Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1442 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32 Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1441 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106,1284=eng@106:0:32 Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1443 from 1535+1535=27:0;1539=deu@106:0:32 to 1535+1535=27:0;1539=deu@106:0:32
I don't see anything wrong with these messages.
With the LNBSHARE patch and vdr-1.7.21 I had no problems like this.
How can I fix this?
I'll test this next weekend and will see what I can do.
Klaus
On 05.12.2011 20:42, Detlef Heine wrote:
- The new setup options "LNB/Device n connected to sat cable" can be
used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options.
Hello Klaus, I have much trouble with the new added Feature from above. My vdr have a S2-6400 card and 1 cable with an splitter for the 2 frondends. I have set up the options correctly. But, specifically on Pro7, the picture and sound freeze after some seconds. The vdr-log show in this moment lines like this:
Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1435 from 511+511=2:512=deu@3;515=deu@106:0:32 to 511+511=2:512=deu@3,513=eng@3;515=deu@106:0:32 Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1440 from 2815+2815=2:2816=deu@3;2819=deu@106:0:32 to 2815+2815=2:2816=deu@3,2817=eng@3;2819=deu@106:0:32 Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1512 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32 Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1513 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32 Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1514 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106:0:32 Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1511 from 511+511=27:0;515=deu@106,516=eng@106:0:32 to 511+511=27:0;515=deu@106,516=eng@106:0:32 Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1444 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32 Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1442 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32 Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1441 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106,1284=eng@106:0:32 Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1443 from 1535+1535=27:0;1539=deu@106:0:32 to 1535+1535=27:0;1539=deu@106:0:32
With the LNBSHARE patch and vdr-1.7.21 I had no problems like this.
How can I fix this?
Do you have only two deivces that share a cable, or is there a third one? There is a bug with more than two devices that share one cable.
Please try this:
--- dvbdevice.c 2011/12/03 15:24:27 2.48 +++ dvbdevice.c 2011/12/06 17:38:18 @@ -1126,7 +1126,7 @@ if (cDevice *Device2 = cDevice::GetDevice(d)) { if (cDvbDevice *DvbDevice1 = dynamic_cast<cDvbDevice *>(Device1)) { if (cDvbDevice *DvbDevice2 = dynamic_cast<cDvbDevice *>(Device2)) { - if (!DvbDevice2->Bond(DvbDevice1)) + if (!DvbDevice1->Bond(DvbDevice2)) return false; // Bond() has already logged the error } else
Klaus
Am 06.12.2011 18:42, schrieb Klaus Schmidinger:
Do you have only two deivces that share a cable, or is there a third one? There is a bug with more than two devices that share one cable.
Please try this:
--- dvbdevice.c 2011/12/03 15:24:27 2.48 +++ dvbdevice.c 2011/12/06 17:38:18 @@ -1126,7 +1126,7 @@ if (cDevice *Device2 = cDevice::GetDevice(d)) { if (cDvbDevice *DvbDevice1 = dynamic_cast<cDvbDevice *>(Device1)) { if (cDvbDevice *DvbDevice2 = dynamic_cast<cDvbDevice *>(Device2)) {
- if (!DvbDevice2->Bond(DvbDevice1))
- if (!DvbDevice1->Bond(DvbDevice2))
return false; // Bond() has already logged the error } else
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
It´s the same. But I think the "3rd device" is the problem. I had used a very ugly plugin. Without this plugin everything is OK. Thank you for your quick response.
Detlef.
-
Detlef Heine -
Klaus Schmidinger -
Ville Skyttä