Hi,
On some channels I get only audio. Screen is still black without Picture. There are two encrypted channels from 19.2E, in UPC packet:
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=1:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0 Spektrum,Spektrum;UPC Direct:11671:hC56M2O0S0:S19.2E:22000:401=1:410=hun,411=cze:420:D02,1815:20360:1:1031:0
I am using eHD, but with VDPAU and xine is result same = black screen. When I try to record thease channels, recording has 0 kB.
However, I can watch thease channels through streamdev plugin and popcornhour or vlc, but Picture has lot of errors. Here is recording through streamdev plugin.
Download link: http://rapidshare.com/files/226876888/1220.ts
If somebody will want to fix it, I can provide some more debug info.
Regards
Marky
On Tuesday 28 of April 2009, Marek Hajduk wrote:
Hi,
On some channels I get only audio. Screen is still black without Picture. There are two encrypted channels from 19.2E, in UPC packet:
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=1:660=hun,661=cze,662=eng:0:D02,18 15:20352:1:1063:0 Spektrum,Spektrum;UPC Direct:11671:hC56M2O0S0:S19.2E:22000:401=1:410=hun,411=cze:420:D02,1815:203 60:1:1031:0
I am using eHD, but with VDPAU and xine is result same = black screen. When I try to record thease channels, recording has 0 kB.
However, I can watch thease channels through streamdev plugin and popcornhour or vlc, but Picture has lot of errors. Here is recording through streamdev plugin.
Download link: http://rapidshare.com/files/226876888/1220.ts
If somebody will want to fix it, I can provide some more debug info.
I confirm this situation, maybe some more info - up to vdr-1.7.2 it was possible to receive those channels, but Spektrum was receivable with errors (discontinuities) in video, AXN was receivable without visible errors. From vdr version vdr-1.7.4 (1.7.3 I didn't use) those channels are not receivable. Decoding is ok as the sound is receivable without problems.
Ales
Marek Hajduk píše v Út 28. 04. 2009 v 23:07 +0200:
Hi,
On some channels I get only audio. Screen is still black without Picture. There are two encrypted channels from 19.2E, in UPC packet:
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=1:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0 Spektrum,Spektrum;UPC Direct:11671:hC56M2O0S0:S19.2E:22000:401=1:410=hun,411=cze:420:D02,1815:20360:1:1031:0
I am using eHD, but with VDPAU and xine is result same = black screen. When I try to record thease channels, recording has 0 kB.
However, I can watch thease channels through streamdev plugin and popcornhour or vlc, but Picture has lot of errors. Here is recording through streamdev plugin.
Download link: http://rapidshare.com/files/226876888/1220.ts
If somebody will want to fix it, I can provide some more debug info.
Regards
Marky
Hi again,
I checked this recording with TS Doctor and I get this continuing errors:
TS ERROR: Invalid paket xxxxxxxxxxx! Error: sync_byte_error Resync found for next paket yyyyyyyyyy with offset: -zzz.
Maybe it helps.
BR
Marky
It's a pity, no answer. I would like to note, that with vdr 1.7.7 is result same-NO video but audio is OK. Receiving these channels with sat boxes like dreambox or triple dragon is without problem.
Thanks for any suggestions.
BR
Marky
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Marek Hajduk Sent: Friday, May 01, 2009 11:30 AM To: vdr@linuxtv.org Subject: Re: [vdr] Black screen on some channels with vdr 1.7.6
Marek Hajduk píše v Út 28. 04. 2009 v 23:07 +0200:
Hi,
On some channels I get only audio. Screen is still black without Picture. There are two encrypted channels from 19.2E, in UPC packet:
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=1:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0 Spektrum,Spektrum;UPC Direct:11671:hC56M2O0S0:S19.2E:22000:401=1:410=hun,411=cze:420:D02,1815:20360:1:1031:0
I am using eHD, but with VDPAU and xine is result same = black screen. When I try to record thease channels, recording has 0 kB.
However, I can watch thease channels through streamdev plugin and popcornhour or vlc, but Picture has lot of errors. Here is recording through streamdev plugin.
Download link: http://rapidshare.com/files/226876888/1220.ts
If somebody will want to fix it, I can provide some more debug info.
Regards
Marky
Hi again,
I checked this recording with TS Doctor and I get this continuing errors:
TS ERROR: Invalid paket xxxxxxxxxxx! Error: sync_byte_error Resync found for next paket yyyyyyyyyy with offset: -zzz.
Maybe it helps.
BR
Marky
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
On 04.05.2009 23:05, Marek Hajduk wrote:
It's a pity, no answer. I would like to note, that with vdr 1.7.7 is result same-NO video but audio is OK. Receiving these channels with sat boxes like dreambox or triple dragon is without problem.
'1' is not a known video stream type in VDR.
Try '2' or '27', as in
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=2:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0
or
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=27:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0
Klaus
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Marek Hajduk Sent: Friday, May 01, 2009 11:30 AM To: vdr@linuxtv.org Subject: Re: [vdr] Black screen on some channels with vdr 1.7.6
Marek Hajduk píše v Út 28. 04. 2009 v 23:07 +0200:
Hi,
On some channels I get only audio. Screen is still black without Picture. There are two encrypted channels from 19.2E, in UPC packet:
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=1:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0 Spektrum,Spektrum;UPC Direct:11671:hC56M2O0S0:S19.2E:22000:401=1:410=hun,411=cze:420:D02,1815:20360:1:1031:0
I am using eHD, but with VDPAU and xine is result same = black screen. When I try to record thease channels, recording has 0 kB.
However, I can watch thease channels through streamdev plugin and popcornhour or vlc, but Picture has lot of errors. Here is recording through streamdev plugin.
Download link: http://rapidshare.com/files/226876888/1220.ts
If somebody will want to fix it, I can provide some more debug info.
Regards
Marky
Hi again,
I checked this recording with TS Doctor and I get this continuing errors:
TS ERROR: Invalid paket xxxxxxxxxxx! Error: sync_byte_error Resync found for next paket yyyyyyyyyy with offset: -zzz.
Maybe it helps.
BR
Marky
On Monday 04 of May 2009, Klaus Schmidinger wrote:
On 04.05.2009 23:05, Marek Hajduk wrote:
It's a pity, no answer. I would like to note, that with vdr 1.7.7 is result same-NO video but audio is OK. Receiving these channels with sat boxes like dreambox or triple dragon is without problem.
'1' is not a known video stream type in VDR.
Try '2' or '27', as in
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=2:660=hun,661=cze,662=eng:0:D02,18 15:20352:1:1063:0
or
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=27:660=hun,661=cze,662=eng:0:D02,1 815:20352:1:1063:0
Klaus
Many thanks, it seems to works (with type of 2), but it is necessary to set "Update channels" to "no".
BR,
Ales
On 05/05/09 00:04, Ales Jurik wrote:
On Monday 04 of May 2009, Klaus Schmidinger wrote:
On 04.05.2009 23:05, Marek Hajduk wrote:
It's a pity, no answer. I would like to note, that with vdr 1.7.7 is result same-NO video but audio is OK. Receiving these channels with sat boxes like dreambox or triple dragon is without problem.
'1' is not a known video stream type in VDR.
Try '2' or '27', as in
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=2:660=hun,661=cze,662=eng:0:D02,18 15:20352:1:1063:0
or
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=27:660=hun,661=cze,662=eng:0:D02,1 815:20352:1:1063:0
Klaus
Many thanks, it seems to works (with type of 2), but it is necessary to set "Update channels" to "no".
Please try this:
--- remux.c 2009/05/03 14:43:25 2.20 +++ remux.c 2009/05/05 07:27:21 @@ -795,6 +795,7 @@ scanner <<= 8; scanner |= Data[i]; switch (type) { + case 0x01: // MPEG 1 video case 0x02: // MPEG 2 video if (scanner == 0x00000100) { // Picture Start Code if (synced && Processed)
With this you should be able to turn "Update channels" on again.
Klaus
On Tuesday 05 of May 2009, Klaus Schmidinger wrote:
On 05/05/09 00:04, Ales Jurik wrote:
...
Many thanks, it seems to works (with type of 2), but it is necessary to set "Update channels" to "no".
Please try this:
--- remux.c 2009/05/03 14:43:25 2.20 +++ remux.c 2009/05/05 07:27:21 @@ -795,6 +795,7 @@ scanner <<= 8; scanner |= Data[i]; switch (type) {
case 0x01: // MPEG 1 video case 0x02: // MPEG 2 video if (scanner == 0x00000100) { // Picture StartCode if (synced && Processed)
With this you should be able to turn "Update channels" on again.
Klaus
Thanks for pointing me to the problem. But for working it it was necessary to add these two changes more:
--- remux.c 2009-05-05 09:44:01.000000000 +0200 +++ remux.c 2009-05-05 09:50:56.854167360 +0200 @@ -481,6 +481,7 @@ void cPatPmtParser::ParsePmt(const uchar for (SI::Loop::Iterator it; Pmt.streamLoop.getNext(stream, it); ) { dbgpatpmt(" stream type = %02X, pid = %d", stream.getStreamType(), stream.getPid()); switch (stream.getStreamType()) { + case 0x01: // MPEG1 case 0x02: // STREAMTYPE_13818_VIDEO case 0x1B: // MPEG4 vpid = stream.getPid(); @@ -702,7 +703,7 @@ cFrameDetector::cFrameDetector(int Pid, newFrame = independentFrame = false; numPtsValues = 0; numIFrames = 0; - isVideo = type == 0x02 || type == 0x1B; // MPEG 2 or MPEG 4 + isVideo = type == 0x01 || type == 0x02 || type == 0x1B; // MPEG 1,2 or 4 frameDuration = 0; framesInPayloadUnit = framesPerPayloadUnit = 0; payloadUnitOfFrame = 0;
Now it seems to works as on older vdr versions (with PES), but video discontinuities are still present on Spektrum (as on many other channels from other providers). On STB's these discontinuities are not present in video.
Thanks and BR,
Ales
I have tu confirm, that I used both patches and it now works-I get picture. But picture has errors.
BR
Marky
Ales Jurik píše v Út 05. 05. 2009 v 09:59 +0200:
On Tuesday 05 of May 2009, Klaus Schmidinger wrote:
On 05/05/09 00:04, Ales Jurik wrote:
...
Many thanks, it seems to works (with type of 2), but it is necessary to set "Update channels" to "no".
Please try this:
--- remux.c 2009/05/03 14:43:25 2.20 +++ remux.c 2009/05/05 07:27:21 @@ -795,6 +795,7 @@ scanner <<= 8; scanner |= Data[i]; switch (type) {
case 0x01: // MPEG 1 video case 0x02: // MPEG 2 video if (scanner == 0x00000100) { // Picture StartCode if (synced && Processed)
With this you should be able to turn "Update channels" on again.
Klaus
Thanks for pointing me to the problem. But for working it it was necessary to add these two changes more:
--- remux.c 2009-05-05 09:44:01.000000000 +0200 +++ remux.c 2009-05-05 09:50:56.854167360 +0200 @@ -481,6 +481,7 @@ void cPatPmtParser::ParsePmt(const uchar for (SI::Loop::Iterator it; Pmt.streamLoop.getNext(stream, it); ) { dbgpatpmt(" stream type = %02X, pid = %d", stream.getStreamType(), stream.getPid()); switch (stream.getStreamType()) {
case 0x01: // MPEG1 case 0x02: // STREAMTYPE_13818_VIDEO case 0x1B: // MPEG4 vpid = stream.getPid();@@ -702,7 +703,7 @@ cFrameDetector::cFrameDetector(int Pid, newFrame = independentFrame = false; numPtsValues = 0; numIFrames = 0;
- isVideo = type == 0x02 || type == 0x1B; // MPEG 2 or MPEG 4
- isVideo = type == 0x01 || type == 0x02 || type == 0x1B; // MPEG 1,2 or 4 frameDuration = 0; framesInPayloadUnit = framesPerPayloadUnit = 0; payloadUnitOfFrame = 0;
Now it seems to works as on older vdr versions (with PES), but video discontinuities are still present on Spektrum (as on many other channels from other providers). On STB's these discontinuities are not present in video.
Thanks and BR,
Ales
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I made recording with vdr 1.7.7 and prewious patches. I get picture with several errors. Here: http://rapidshare.com/files/229350889/2009-05-05.10.45.1220-0.rec.tar.gz.htm...
BR
Marky Marek Hajduk píše v Út 05. 05. 2009 v 10:41 +0200:
I have tu confirm, that I used both patches and it now works-I get picture. But picture has errors.
BR
Marky
Ales Jurik píše v Út 05. 05. 2009 v 09:59 +0200:
On Tuesday 05 of May 2009, Klaus Schmidinger wrote:
On 05/05/09 00:04, Ales Jurik wrote:
...
Many thanks, it seems to works (with type of 2), but it is necessary to set "Update channels" to "no".
Please try this:
--- remux.c 2009/05/03 14:43:25 2.20 +++ remux.c 2009/05/05 07:27:21 @@ -795,6 +795,7 @@ scanner <<= 8; scanner |= Data[i]; switch (type) {
case 0x01: // MPEG 1 video case 0x02: // MPEG 2 video if (scanner == 0x00000100) { // Picture StartCode if (synced && Processed)
With this you should be able to turn "Update channels" on again.
Klaus
Thanks for pointing me to the problem. But for working it it was necessary to add these two changes more:
--- remux.c 2009-05-05 09:44:01.000000000 +0200 +++ remux.c 2009-05-05 09:50:56.854167360 +0200 @@ -481,6 +481,7 @@ void cPatPmtParser::ParsePmt(const uchar for (SI::Loop::Iterator it; Pmt.streamLoop.getNext(stream, it); ) { dbgpatpmt(" stream type = %02X, pid = %d", stream.getStreamType(), stream.getPid()); switch (stream.getStreamType()) {
case 0x01: // MPEG1 case 0x02: // STREAMTYPE_13818_VIDEO case 0x1B: // MPEG4 vpid = stream.getPid();@@ -702,7 +703,7 @@ cFrameDetector::cFrameDetector(int Pid, newFrame = independentFrame = false; numPtsValues = 0; numIFrames = 0;
- isVideo = type == 0x02 || type == 0x1B; // MPEG 2 or MPEG 4
- isVideo = type == 0x01 || type == 0x02 || type == 0x1B; // MPEG 1,2 or 4 frameDuration = 0; framesInPayloadUnit = framesPerPayloadUnit = 0; payloadUnitOfFrame = 0;
Now it seems to works as on older vdr versions (with PES), but video discontinuities are still present on Spektrum (as on many other channels from other providers). On STB's these discontinuities are not present in video.
Thanks and BR,
Ales
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
You can also add one more case :
case 0x19: // advanced codec HD digital television service
Rgds,
Alex
Marek Hajduk wrote:
I made recording with vdr 1.7.7 and prewious patches. I get picture with several errors. Here: http://rapidshare.com/files/229350889/2009-05-05.10.45.1220-0.rec.tar.gz.htm...
BR
Marky Marek Hajduk píše v Út 05. 05. 2009 v 10:41 +0200:
I have tu confirm, that I used both patches and it now works-I get picture. But picture has errors.
BR
Marky
Ales Jurik píše v Út 05. 05. 2009 v 09:59 +0200:
On Tuesday 05 of May 2009, Klaus Schmidinger wrote:
On 05/05/09 00:04, Ales Jurik wrote:
...
Many thanks, it seems to works (with type of 2), but it is necessary to set "Update channels" to "no".
Please try this:
--- remux.c 2009/05/03 14:43:25 2.20 +++ remux.c 2009/05/05 07:27:21 @@ -795,6 +795,7 @@ scanner <<= 8; scanner |= Data[i]; switch (type) {
case 0x01: // MPEG 1 video case 0x02: // MPEG 2 video if (scanner == 0x00000100) { // Picture StartCode if (synced && Processed)
With this you should be able to turn "Update channels" on again.
Klaus
Thanks for pointing me to the problem. But for working it it was necessary to add these two changes more:
--- remux.c 2009-05-05 09:44:01.000000000 +0200 +++ remux.c 2009-05-05 09:50:56.854167360 +0200 @@ -481,6 +481,7 @@ void cPatPmtParser::ParsePmt(const uchar for (SI::Loop::Iterator it; Pmt.streamLoop.getNext(stream, it); ) { dbgpatpmt(" stream type = %02X, pid = %d", stream.getStreamType(), stream.getPid()); switch (stream.getStreamType()) {
case 0x01: // MPEG1 case 0x02: // STREAMTYPE_13818_VIDEO case 0x1B: // MPEG4 vpid = stream.getPid();@@ -702,7 +703,7 @@ cFrameDetector::cFrameDetector(int Pid, newFrame = independentFrame = false; numPtsValues = 0; numIFrames = 0;
- isVideo = type == 0x02 || type == 0x1B; // MPEG 2 or MPEG 4
- isVideo = type == 0x01 || type == 0x02 || type == 0x1B; // MPEG 1,2 or 4 frameDuration = 0; framesInPayloadUnit = framesPerPayloadUnit = 0; payloadUnitOfFrame = 0;
Now it seems to works as on older vdr versions (with PES), but video discontinuities are still present on Spektrum (as on many other channels from other providers). On STB's these discontinuities are not present in video.
Thanks and BR,
Ales
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I found out that errors in picture is caused by decryption of channel. With every new ecm I get error (break up) in picture. Interesting thing is that packet UPC has about 70 channels, however only several has problem with decryption.
Can somebody tell me, how can I provide more debug info?
BR
Marky
Marek Hajduk píše v Út 05. 05. 2009 v 10:41 +0200:
I have tu confirm, that I used both patches and it now works-I get picture. But picture has errors.
BR
Marky
Ales Jurik píše v Út 05. 05. 2009 v 09:59 +0200:
On Tuesday 05 of May 2009, Klaus Schmidinger wrote:
On 05/05/09 00:04, Ales Jurik wrote:
...
Many thanks, it seems to works (with type of 2), but it is necessary to set "Update channels" to "no".
Please try this:
--- remux.c 2009/05/03 14:43:25 2.20 +++ remux.c 2009/05/05 07:27:21 @@ -795,6 +795,7 @@ scanner <<= 8; scanner |= Data[i]; switch (type) {
case 0x01: // MPEG 1 video case 0x02: // MPEG 2 video if (scanner == 0x00000100) { // Picture StartCode if (synced && Processed)
With this you should be able to turn "Update channels" on again.
Klaus
Thanks for pointing me to the problem. But for working it it was necessary to add these two changes more:
--- remux.c 2009-05-05 09:44:01.000000000 +0200 +++ remux.c 2009-05-05 09:50:56.854167360 +0200 @@ -481,6 +481,7 @@ void cPatPmtParser::ParsePmt(const uchar for (SI::Loop::Iterator it; Pmt.streamLoop.getNext(stream, it); ) { dbgpatpmt(" stream type = %02X, pid = %d", stream.getStreamType(), stream.getPid()); switch (stream.getStreamType()) {
case 0x01: // MPEG1 case 0x02: // STREAMTYPE_13818_VIDEO case 0x1B: // MPEG4 vpid = stream.getPid();@@ -702,7 +703,7 @@ cFrameDetector::cFrameDetector(int Pid, newFrame = independentFrame = false; numPtsValues = 0; numIFrames = 0;
- isVideo = type == 0x02 || type == 0x1B; // MPEG 2 or MPEG 4
- isVideo = type == 0x01 || type == 0x02 || type == 0x1B; // MPEG 1,2 or 4 frameDuration = 0; framesInPayloadUnit = framesPerPayloadUnit = 0; payloadUnitOfFrame = 0;
Now it seems to works as on older vdr versions (with PES), but video discontinuities are still present on Spektrum (as on many other channels from other providers). On STB's these discontinuities are not present in video.
Thanks and BR,
Ales
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Marek Hajduk píše v St 13. 05. 2009 v 23:56 +0200:
I found out that errors in picture is caused by decryption of channel. With every new ecm I get error (break up) in picture. Interesting thing is that packet UPC has about 70 channels, however only several has problem with decryption.
Can somebody tell me, how can I provide more debug info?
BR
Marky
This problem is solved by new sc-plugin from today.
BR
Marky
Many Thanks, Klaus.
It works. I will try to record several seconds, because picture has errors.
once again, thanks for help.
BR
Marky
Klaus Schmidinger píše v Po 04. 05. 2009 v 23:34 +0200:
On 04.05.2009 23:05, Marek Hajduk wrote:
It's a pity, no answer. I would like to note, that with vdr 1.7.7 is result same-NO video but audio is OK. Receiving these channels with sat boxes like dreambox or triple dragon is without problem.
'1' is not a known video stream type in VDR.
Try '2' or '27', as in
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=2:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0
or
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=27:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0
Klaus
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Marek Hajduk Sent: Friday, May 01, 2009 11:30 AM To: vdr@linuxtv.org Subject: Re: [vdr] Black screen on some channels with vdr 1.7.6
Marek Hajduk píše v Út 28. 04. 2009 v 23:07 +0200:
Hi,
On some channels I get only audio. Screen is still black without Picture. There are two encrypted channels from 19.2E, in UPC packet:
AXN,AXN;UPC Direct:10921:hC56M2O0S0:S19.2E:22000:651=1:660=hun,661=cze,662=eng:0:D02,1815:20352:1:1063:0 Spektrum,Spektrum;UPC Direct:11671:hC56M2O0S0:S19.2E:22000:401=1:410=hun,411=cze:420:D02,1815:20360:1:1031:0
I am using eHD, but with VDPAU and xine is result same = black screen. When I try to record thease channels, recording has 0 kB.
However, I can watch thease channels through streamdev plugin and popcornhour or vlc, but Picture has lot of errors. Here is recording through streamdev plugin.
Download link: http://rapidshare.com/files/226876888/1220.ts
If somebody will want to fix it, I can provide some more debug info.
Regards
Marky
Hi again,
I checked this recording with TS Doctor and I get this continuing errors:
TS ERROR: Invalid paket xxxxxxxxxxx! Error: sync_byte_error Resync found for next paket yyyyyyyyyy with offset: -zzz.
Maybe it helps.
BR
Marky
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-
Ales Jurik -
alexw -
Klaus Schmidinger -
Marek Hajduk