Hi all,
I just implemented nvram-wakeup to allow shutdown/wakeup of my VDR box (previously it was just running 24/7). Now when the systems starts so that when VDR is launched, it should begin recording immediately VDSB happens :(
If I start the system & VDR without an immediate need for a timer to start and start a timer a bit later, it works ok.
Here's two log extracts from both situations:
First, started so that recording begins automatically:
May 15 19:28:30 vdr: [2196] timer 1 (1 1903-2007 'Prisma~Prisma: Maa, ihmeiden planeetta') start May 15 19:28:30 vdr: [2196] record /srv/vdr/Prisma/Prisma:_Maa,_ihmeiden_planeetta/2006-05-15.19.03.50.99.rec May 15 19:28:32 silver vdr: [2207] channel 1 (YLE TV1) event Mon 15.05.2006 19:05-19:57 'Prisma: Maa, ihmeiden planeetta' status 4 May 15 19:28:33 vdr: [2196] stopping recording due to modification of channel 1 May 15 19:28:34 vdr: [2196] timer 1 (1 1903-2007 'Prisma~Prisma: Maa, ihmeiden planeetta') stop May 15 19:28:34 vdr: [2196] retuning due to modification of channel 1 May 15 19:28:34 vdr: [2196] switching to channel 1 May 15 19:28:35 vdr: [2196] timer 1 (1 1903-2007 'Prisma~Prisma: Maa, ihmeiden planeetta') start May 15 19:28:35 vdr: [2196] record /srv/vdr/Prisma/Prisma:_Maa,_ihmeiden_planeetta/2006-05-15.19.03.50.99.rec May 15 19:29:06 vdr: [2223] ERROR: video data stream broken May 15 19:29:06 vdr: [2223] initiating emergency exit May 15 19:29:06 vdr: [2196] emergency exit requested - shutting down
Then, removed the timer entry, started VDR and then introduced the same timer again:
May 15 19:31:26 vdr: [2356] channel 1 (YLE TV1) event Mon 15.05.2006 19:05-19:57 'Prisma: Maa, ihmeiden planeetta' status 4 May 15 19:31:29 vdr: [2348] retuning due to modification of channel 1 May 15 19:31:29 vdr: [2348] switching to channel 1 May 15 19:31:45 vdr: [2348] timer 14 (1 1903-2007 'Prisma~Prisma: Maa, ihmeiden planeetta') start May 15 19:31:45 vdr: [2348] record /srv/vdr/Prisma/Prisma:_Maa,_ihmeiden_planeetta/2006-05-15.19.03.50.99.rec May 15 19:31:55 vdr: [2348] timer 14 (1 1903-2007 'Prisma~Prisma: Maa, ihmeiden planeetta') set to event Mon 15.05.2006 19:05-19:57 'Prisma: Maa, ihmeiden planeetta'
Could it be that VDR doesn't handle the dynamic PID changes (YLE) in this situation? As it doesn't handle them very well in live viewing either.
I haven't yet tested whether this affects other channels that don't have PID changes too.
Also, after upgrading to VDR 1.4.0 and FC5 kernel 2.6.16-1.2111 I'm seeing a lot of these:
May 15 19:32:07 vdr: [2381] cVideoRepacker: found system start code: stream seems to be scrambled or not demultiplexed
May 15 19:35:17 vdr: [2380] ERROR: unknown picture type '6' (and picture type '4')
Heikki Manninen wrote:
Hi all,
I just implemented nvram-wakeup to allow shutdown/wakeup of my VDR box (previously it was just running 24/7). Now when the systems starts so that when VDR is launched, it should begin recording immediately VDSB happens :(
Ok, seems to happen also during normal operation (without VDR just beign started):
May 15 20:02:50 silver vdr: [2348] stopping recording due to modification of channel 1 May 15 20:02:50 silver vdr: [2348] timer 14 (1 1903-2007 'Prisma~Prisma: Maa, ihmeiden planeetta') stop May 15 20:02:50 silver vdr: [2348] stopping recording due to modification of channel 1 May 15 20:02:50 silver vdr: [2348] timer 1 (1 1958-2039 'MOT~Hitain oikeus. Euroopan ihmisoikeustuom') stop May 15 20:02:50 silver vdr: [2348] retuning due to modification of channel 1 May 15 20:02:50 silver vdr: [2348] switching to channel 1 May 15 20:02:51 silver vdr: [2348] timer 1 (1 1958-2039 'MOT~Hitain oikeus. Euroopan ihmisoikeustuom') start May 15 20:02:51 silver vdr: [2348] record /srv/vdr/MOT/Hitain_oikeus._Euroopan_ihmisoikeustuom/2006-05-15.19.58.50.99.rec May 15 20:02:54 silver vdr: [2348] timer 14 (1 1903-2007 'Prisma~Prisma: Maa, ihmeiden planeetta') start May 15 20:02:54 silver vdr: [2348] record /srv/vdr/Prisma/Prisma:_Maa,_ihmeiden_planeetta/2006-05-15.19.03.50.99.rec May 15 20:03:22 silver vdr: [2399] ERROR: video data stream broken May 15 20:03:22 silver vdr: [2399] initiating emergency exit May 15 20:03:22 silver vdr: [2348] emergency exit requested - shutting down
I can't remember having this problem before (FC4, lastest kernel as of last week, VDR 1.3.38 IIRC) and surely YLE has had dynamic PID changes for a while now.
On Mon, 2006-05-15 at 21:49 +0300, Heikki Manninen wrote:
I can't remember having this problem before (FC4, lastest kernel as of last week, VDR 1.3.38 IIRC) and surely YLE has had dynamic PID changes for a while now.
Should also add that the systems has 1 x Fujitsu-Siemens DVB-C & 2 x Technotrend DVB-C 2.1 (FF) with CIs and CAMs. Firmware is the latest from linuxtv.org. Fujitsu-Siemens being the primary card.