hi,
I use a technotrend dvb-c 2.3 premium card with latest firmware 2623 and almost the latest dvb drivers and also one CAM for RTL, SAT1 etc. and one for premiere if I switch to an encrypted channel like premiere - vdr always try to get the key from both CAMs that results in a CAM message like this: "Sie haben keine Berechtigung für diesen Sender" so, I turned the smartcard-messages off (CAM menu) now it seems that it is OK, but sometimes it takes a long time to switch from one premiere-channel to another if I remove the iesy-smartcard (iesy - my cable provider in hessen) switching channels is much faster
this works also in the other direction removing the premiere smartcard switching RTL SAT1
only if I insert both cards at the same time I run into problems
another funny thing is that - if I insert both cards and switch to "premiere krimi" I get a CAM-message "1 sendungfreigeben" but the channel is already decrypted in the background and I can see and hear the movie
any ideas?
marco
Marco Skambraks wrote:
hi,
I use a technotrend dvb-c 2.3 premium card with latest firmware 2623 and almost the latest dvb drivers and also one CAM for RTL, SAT1 etc. and one for premiere if I switch to an encrypted channel like premiere - vdr always try to get the key from both CAMs that results in a CAM message like this: "Sie haben keine Berechtigung für diesen Sender" so, I turned the smartcard-messages off (CAM menu) now it seems that it is OK, but sometimes it takes a long time to switch from one premiere-channel to another if I remove the iesy-smartcard (iesy - my cable provider in hessen) switching channels is much faster
In VDR version 1.4 the CA_PMT records (that's the data a CAM needs in order to know which PIDs it shall decrypt) are sent to all CAMs in one CI device. I know that this can be a problem, and that's why I'm going to address this first thing in the upcoming 1.5 developer version.
Sorry, but at the moment I guess turning off the CAM messages is all you can do.
Klaus
hi,
OK, now I know you are aware of this problem
thanks for your reply
I'll wait and hope :-)
marco
On Tue, 8 Aug 2006, Klaus Schmidinger wrote:
Marco Skambraks wrote:
hi,
I use a technotrend dvb-c 2.3 premium card with latest firmware 2623 and almost the latest dvb drivers and also one CAM for RTL, SAT1 etc. and one for premiere if I switch to an encrypted channel like premiere - vdr always try to get the key from both CAMs that results in a CAM message like this: "Sie haben keine Berechtigung für diesen Sender" so, I turned the smartcard-messages off (CAM menu) now it seems that it is OK, but sometimes it takes a long time to switch from one premiere-channel to another if I remove the iesy-smartcard (iesy - my cable provider in hessen) switching channels is much faster
In VDR version 1.4 the CA_PMT records (that's the data a CAM needs in order to know which PIDs it shall decrypt) are sent to all CAMs in one CI device. I know that this can be a problem, and that's why I'm going to address this first thing in the upcoming 1.5 developer version.
Sorry, but at the moment I guess turning off the CAM messages is all you can do.
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-------------------------------------------------- AMMEC - Accessible Multimedia Entertainment Center
http://www.ammec.de Email: Marco Skambraks marco@ammec.de
Hi!
I have Premiere and RTL, ... via Kabel Deutschland, and Kabel Deutschland registered the Premiere card in their system, so I need only one card to decrypt Premiere and Kabel Deutschland.
Maybe this is a way around this.
Regards
Marco
Marco Skambraks schrieb:
hi,
I use a technotrend dvb-c 2.3 premium card with latest firmware 2623 and almost the latest dvb drivers and also one CAM for RTL, SAT1 etc. and one for premiere if I switch to an encrypted channel like premiere - vdr always try to get the key from both CAMs that results in a CAM message like this: "Sie haben keine Berechtigung für diesen Sender" so, I turned the smartcard-messages off (CAM menu) now it seems that it is OK, but sometimes it takes a long time to switch from one premiere-channel to another if I remove the iesy-smartcard (iesy - my cable provider in hessen) switching channels is much faster
this works also in the other direction removing the premiere smartcard switching RTL SAT1
only if I insert both cards at the same time I run into problems
another funny thing is that - if I insert both cards and switch to "premiere krimi" I get a CAM-message "1 sendungfreigeben" but the channel is already decrypted in the background and I can see and hear the movie
any ideas?
marco
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
hi, On Wed, 9 Aug 2006, Marco Göbenich wrote:
Hi!
I have Premiere and RTL, ... via Kabel Deutschland, and Kabel Deutschland registered the Premiere card in their system, so I need only one card to decrypt Premiere and Kabel Deutschland.
Maybe this is a way around this.
yes, but iesy (kabel hessen) is not working together with premiere maybe in the future
in case I would like to watch "arena" I need a third card
best regards the other Marco :-)
Regards
Marco
Marco Skambraks schrieb:
hi,
I use a technotrend dvb-c 2.3 premium card with latest firmware 2623 and almost the latest dvb drivers and also one CAM for RTL, SAT1 etc. and one for premiere if I switch to an encrypted channel like premiere - vdr always try to get the key from both CAMs that results in a CAM message like this: "Sie haben keine Berechtigung für diesen Sender" so, I turned the smartcard-messages off (CAM menu) now it seems that it is OK, but sometimes it takes a long time to switch from one premiere-channel to another if I remove the iesy-smartcard (iesy - my cable provider in hessen) switching channels is much faster
this works also in the other direction removing the premiere smartcard switching RTL SAT1
only if I insert both cards at the same time I run into problems
another funny thing is that - if I insert both cards and switch to "premiere krimi" I get a CAM-message "1 sendungfreigeben" but the channel is already decrypted in the background and I can see and hear the movie
any ideas?
marco
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-- vierzehn Bahnhofstr. 27 Telefon 0 26 32 / 98 98 - 120 public relations 56626 Andernach Telefax 0 26 32 / 98 98 - 111 GmbH & Co. KG E-Mail: mg@vierzehn.com
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-------------------------------------------------- AMMEC - Accessible Multimedia Entertainment Center
http://www.ammec.de Email: Marco Skambraks marco@ammec.de