VDR developer version 1.7.37 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.36-1.7.37.diff
MD5 checksums:
602dc7e678bcfcf075da36344a337562 vdr-1.7.37.tar.bz2 34e953fcffc112f316cbfc1f53915324 vdr-1.7.36-1.7.37.diff
WARNING: ========
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
Approaching version 2.0.0: ==========================
If all goes well, there should be no more functional or API changes before the final version 2.0.0. There will just be a few more fixes.
The changes since version 1.7.36:
- Now also using FindHeader() in cMpeg2Fixer::AdjTref() (pointed out by Sören Moch). - Added missing template for DVBDIR to Make.config.template (reported by Derek Kelly). - The LCARS menu now also works if the OSD has only 1bpp (two colors). - Fixed possible garbage in the remaining time of the LCARS replay display in case the hours change from two to one digit. - Fixed upscaling bitmaps. The last row and column of the scaled bitmap was not filled, which resulted in empty lines between scaled subtitles. - Fixed a leftover line in case a two line subtitle was followed by a one line subtitle on the dvbhddevice in "high level" OSD mode. - Returning 0 from cDvbSdFfDevice::NumProvidedSystems() if option --outputonly is given. - The index file is now closed after initially reading it if it is older than 3600 seconds. - Improved responsiveness during replay when close to the recording's end. - Fixed a leftover progress display in the LCARS main menu when replay of a recording ends while the menu is open, and the live channel has no EPG information. - Fixed possible audio chatter when a recording is replayed to its very end. - Added dependency on 'i18n' to 'install-i18n' in the VDR Makefile (thanks to Tobias Grimm). - Changed several calls to Skins.Message() in vdr.c to Skins.QueueMessage() in order to avoid a black screen while such a message is displayed in case the channel will be switched (reported by Uwe Scheffler). - Updated the Slovakian language texts (thanks to Milan Hrala). - Improved LIRC timing for repeat function. - When pausing live video, the current audio and subtitle tracks are now retained. - Added some notes about plugin Makefiles to PLUGINS.html. - Avoiding an extra key press event if the repeat function kicks in when controlling VDR via the PC keyboard. - The new options "Setup/Miscellaneous/Remote control repeat delay" and "Setup/Miscellaneous/Remote control repeat delta" can be used to adjust the behavior of the remote control in case a key is held pressed down for a while, so that the repeat function kicks in (see MANUAL). The builtin LIRC and KBD remote controls already use these parameters. It is recommended that plugins that implement an interface to any kind of remote controls also use the parameters Setup.RcRepeatDelay and Setup.RcRepeatDelta for the desired purpose, and remove any setup options they might have that serve the same purpose. - cTimer no longer does any special "VFAT" handling to shorten directory names to 40 characters. When a string is used as a directory name for a recording, the maximum length of the directory path, as well as the individual directory names, is now limited to the values specified by the new command line option --dirnames (see man vdr(1) for details). For backwards compatibility the option --vfat is still available and has the same effect as --dirnames=250,40,1. - The macro MaxFileName is now obsolete and may be removed in future versions. Use NAME_MAX directly instead. - There is no more fixed limit to the maximum number of cPixmap objects an OSD can create. However, a particular device may still be unable to create an arbitrary number of pixmaps, due to limited resources. So it's always a good idea to use as few pixmaps as possible. - Fixed formatting and removed some superfluous break statements in vdr.c's command line option switch.
Have fun!
Klaus
Hi,
Found some weird file in the tarball: menu.cyVkmHd
Lars.
Am 09.02.2013 15:35, schrieb Klaus Schmidinger:
VDR developer version 1.7.37 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37.tar.bz2A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.36-1.7.37.diffMD5 checksums:
602dc7e678bcfcf075da36344a337562 vdr-1.7.37.tar.bz2 34e953fcffc112f316cbfc1f53915324 vdr-1.7.36-1.7.37.diff
WARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
Approaching version 2.0.0:
If all goes well, there should be no more functional or API changes before the final version 2.0.0. There will just be a few more fixes.
The changes since version 1.7.36:
- Now also using FindHeader() in cMpeg2Fixer::AdjTref() (pointed out by Sören Moch).
- Added missing template for DVBDIR to Make.config.template (reported by Derek Kelly).
- The LCARS menu now also works if the OSD has only 1bpp (two colors).
- Fixed possible garbage in the remaining time of the LCARS replay display in case the hours change from two to one digit.
- Fixed upscaling bitmaps. The last row and column of the scaled bitmap was not filled, which resulted in empty lines between scaled subtitles.
- Fixed a leftover line in case a two line subtitle was followed by a one line subtitle on the dvbhddevice in "high level" OSD mode.
- Returning 0 from cDvbSdFfDevice::NumProvidedSystems() if option --outputonly is given.
- The index file is now closed after initially reading it if it is older than 3600 seconds.
- Improved responsiveness during replay when close to the recording's end.
- Fixed a leftover progress display in the LCARS main menu when replay of a recording ends while the menu is open, and the live channel has no EPG information.
- Fixed possible audio chatter when a recording is replayed to its very end.
- Added dependency on 'i18n' to 'install-i18n' in the VDR Makefile (thanks to Tobias Grimm).
- Changed several calls to Skins.Message() in vdr.c to Skins.QueueMessage() in order to avoid a black screen while such a message is displayed in case the channel will be switched (reported by Uwe Scheffler).
- Updated the Slovakian language texts (thanks to Milan Hrala).
- Improved LIRC timing for repeat function.
- When pausing live video, the current audio and subtitle tracks are now retained.
- Added some notes about plugin Makefiles to PLUGINS.html.
- Avoiding an extra key press event if the repeat function kicks in when controlling VDR via the PC keyboard.
- The new options "Setup/Miscellaneous/Remote control repeat delay" and "Setup/Miscellaneous/Remote control repeat delta" can be used to adjust the behavior of the remote control in case a key is held pressed down for a while, so that the repeat function kicks in (see MANUAL). The builtin LIRC and KBD remote controls already use these parameters. It is recommended that plugins that implement an interface to any kind of remote controls also use the parameters Setup.RcRepeatDelay and Setup.RcRepeatDelta for the desired purpose, and remove any setup options they might have that serve the same purpose.
- cTimer no longer does any special "VFAT" handling to shorten directory names to 40 characters. When a string is used as a directory name for a recording, the maximum length of the directory path, as well as the individual directory names, is now limited to the values specified by the new command line option --dirnames (see man vdr(1) for details). For backwards compatibility the option --vfat is still available and has the same effect as --dirnames=250,40,1.
- The macro MaxFileName is now obsolete and may be removed in future versions. Use NAME_MAX directly instead.
- There is no more fixed limit to the maximum number of cPixmap objects an OSD can create. However, a particular device may still be unable to create an arbitrary number of pixmaps, due to limited resources. So it's always a good idea to use as few pixmaps as possible.
- Fixed formatting and removed some superfluous break statements in vdr.c's command line option switch.
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
On 10 February 2013 21:28, Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
On 10.02.2013 21:01, Lars Hanisch wrote:
Found some weird file in the tarball: menu.cyVkmHd
Thanks, will be removed in the next version.
If we are polishing stuff like this for 2.0, there are two small bugs in the permissions in the .tar:
1) vdr-1.7.37/po/sr_SR.po is -rw------- rather than -rw-r--r--
2) all the files have a named owner/group kls/users - ideally the tar should be created with `tar -c --owner=root --group=root --numeric-owner` to clear these and set the owner group as 0/0. Currently if you unpack the tar as root, you end up with files owned by an unknown user with userid 500.
Cheers, Dom
On 11.02.2013 16:49, Dominic Evans wrote:
On 10 February 2013 21:28, Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
On 10.02.2013 21:01, Lars Hanisch wrote:
Found some weird file in the tarball: menu.cyVkmHd
Thanks, will be removed in the next version.
If we are polishing stuff like this for 2.0, there are two small bugs in the permissions in the .tar:
vdr-1.7.37/po/sr_SR.po is -rw------- rather than -rw-r--r--
all the files have a named owner/group kls/users - ideally the tar
should be created with `tar -c --owner=root --group=root --numeric-owner` to clear these and set the owner group as 0/0. Currently if you unpack the tar as root, you end up with files owned by an unknown user with userid 500.
Thanks. Both fixed for the next version.
Klaus
-
Dominic Evans -
Klaus Schmidinger -
Lars Hanisch