Hauppauge WinTV-Starburst2
Jump to navigation
Jump to search
This is a stripped down version of Hauppauge WinTV-HVR-5525, using only the DVB-S2 part.
Overview/Features
A DVB-S2 PCIe card from Hauppauge with a PCIe 1x interface.
Technical Details
- Name: Hauppauge WinTV-Starburst2
- Bridge: Conexant PCIe A/V Decoder CX23888
- DVB-S2 demodulator and tuner: Montage M88RS6000
- PCI ID 0070:f02a
Driver and firmware
Firmware --> https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-demod-m88rs6000.fw
Place the firmware file under /lib/firmware.
Making it Work
"lspci -vnn" output:
06:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb [14f1:8880] (rev 04) Subsystem: Hauppauge computer works Inc. Device [0070:f02a] Flags: bus master, fast devsel, latency 0, IRQ 291 Memory at f6200000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 3 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: cx23885 Kernel modules: cx23885
With kernel >=4.18 try to choose Starburst2 by using modprobe "options cx23885 card=59" [1].
With kernel <4.18 configure WinTV-HVR-5525 by using modprobe "options cx23885 card=52".
su - cd /lib/firmware wget https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-demod-m88rs6000.fw cd /etc/modprobe.d echo "options cx23885 card=52" > 98-WinTV-Starburst-2.conf
Reboot system.
"dmesg" output (configured as HVR-5525 with openSUSE Leap 15.1 kernel 4.12.14):
tveeprom: Hauppauge model 150300, rev C2I9, serial# xxxxxxxxx tveeprom: MAC address is 00:0d:fe:92:xx:xx tveeprom: tuner model is unknown (idx 189, type 4) tveeprom: TV standards UNKNOWN (eeprom 0x01) tveeprom: audio processor is CX23888 (idx 40) tveeprom: decoder processor is CX23888 (idx 34) tveeprom: has no radio, has IR receiver, has no IR transmitter cx23885: cx23885[0]: warning: unknown hauppauge model #150300 cx23885: cx23885[0]: hauppauge eeprom: model=150300 cx23885: cx23885_dvb_register() allocating 1 frontend(s) cx23885: cx23885[0]: cx23885 based dvb card i2c i2c-4: Added multiplexed i2c bus 7 a8293 4-000b: Allegro A8293 SEC successfully attached m88rs6000t 7-0021: chip_id=64 m88rs6000t 7-0021: Montage M88RS6000 internal tuner successfully identified dvbdev: DVB: registering new adapter (cx23885[0]) cx23885 0000:06:00.0: DVB: registering adapter 0 frontend 0 (Montage Technology M88RS6000)... cx23885: cx23885_dvb_register() allocating 1 frontend(s) cx23885: cx23885[0]: cx23885 based dvb card si2168: probe of 4-0064 failed with error -121 cx23885: cx23885_dvb_register() dvb_register failed err = -22 cx23885: cx23885_dev_setup() Failed to register dvb on VID_C cx23885: cx23885_dev_checkrevision() Hardware revision = 0xd0 cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 4, irq: 291, latency: 0, mmio: 0xf6200000
After accessing the tuner, for example with kaffeine ("dmesg" output):
m88ds3103 4-0069: found a 'Montage Technology M88DS3103' in cold state m88ds3103 4-0069: downloading firmware from file 'dvb-demod-m88rs6000.fw' m88ds3103 4-0069: found a 'Montage Technology M88DS3103' in warm state m88ds3103 4-0069: firmware version: 4.1