OctopusNET DVB-S2 Streaming Box

Product information "DD Octopus NET S2/4 Network tuner" http://www.digital-devices.eu/shop/en/network-tv-tuner/network-tv-tuner/

SAT>IP Standard

   nach V 1.2

HDTV (H.264/H.265/MPEG4)

   Ja

Anschluss via

   Netzwerk

Tuner

   4

Empfangsart(en)

   DVB-S/S2

Einkabelbetrieb

   Unicable

Netzwerk

   5Port GigaBit mang. Switch

Anzahl CI-Slot(s)

   1

Kaskadierbar

   Ja

Stromversorgung

   über Netzteil

Stromverbrauch

   ca. 12 Watt ohne LNB

The High-End Networktuner - Octopus Net

The Octopus Net is streaming LiveTV to IPTV-Ready devices in the local network. It makes so many devices to a FullHD (*1) receiver for satellite television and cable television. Thereby will send the FTA Channels (*2) in FullHD in the LAN or WLAN Network. Up to 4 streams - depending on model - may be used simultaneously on stationary and mobile devices. The to-use client software (*3) is for the operating systems iOS (iPhone, iPad), Android, Mac OS and Windows already from various manufacturers available on the market (Smart TVs, Windows Phone, Windows RT and Kindle Fire HD in preparation).

All models in the Octopus Net series contains a 5 port gigabit managed switch and the possibility to be equipped with two DuoFlex modules (* 4). The Octopus Net can be any number of times cascaded (controlled by IP address). Power is supplied by an external power supply (rack version also possible internally). The use of wireless clients requires an additional wireless access point.

• 1 Full HD ready, depending on the client
• 2 CI support
• 3 possibly charged (the current list below: www.satip.info)
• 4 Depending on the model are 1 or 2 twin tuner included

Due technical reasons, the MTD function is not available for this device.

SATIP-1

The model Octopus Net S2 / 4 includes four DVB-S / S2 tuner. The configuration is made via web interface, a firmware update is performed via LAN / Internet when needed. You will also receive the free software Digital Devices TV for Windows XP / 7 / 8th

To use the network tuner you need a client software or a hardware client for your system environment. The IPTV client software for the protocol SAT> IP can be paid for, a list of usable products, see http://www.satip.info.

SATIP2

Octopus Net S2/4 Specifications:

   SAT> IP for 2 Participants (expandable by cascading)
   SAT> IP protocol version 1.2 (upgradeable) 
   Updates via the Web configurator on LAN 
   Singlecast / Multicast via UDP / RTP 
   contain a 2x twin tuner 
   5 port managed Gigabit switch (5x 10/100/100 Ethernet) 
   Protocols IPv4 and IPv6, multicast, IP filtering, full duplex 
   CI support 

Receiving module(s):

   2x DuoFlex S2 Twin tuner expansion module (DVB-S / S2)
   Frequency range: L-band 950 to 2150 MHz
   4x F-connector (75 Ohm) 
   supports DiSEqC 2.x 
   unicable support 

General:

   I / O switch
   Powered via external 12V power supply, 220V 50-60 Hz 
   Operating max: 12 Watt (4 tuner) without LNB power 
   Temperature range: -10 to 50 degrees 
   wall attitude 
   Dimensions WxHxD: 45 x 127 x 127 
   Weight: 500 grams 
   Made in Germany

Advantages of Octopus Net Series (TV-IP server):

   DVB-C, DVB-T, DVB-S / S2 support
   Modular (2/4 Tuner System, Octopus Net Rack to 8 tuners)
   Mixed configuration of your choice
   Reception mode change at any time (by DuoFlex modules)
   powerful hardware for up to 12 streams in stable single-cast mode (Stream Cloning)
   Any number of streams in the multicast operation
   5 port gigabyte switch, mang.
   Quality of Serivce internally and externally (QoS)
   CI interface
   Digital Devices TV Version 1.06 free

Downloads:

   Digital Devices DD-TV Software
   Octopus Net Manual
   Octopus Octopus Cast Tool

Delivery:

   Digital Devices Octopus Net S2 / 4, SAT> IP Network Tuner
   Octopus Net, external (network tuner, 5 Port Switch, housing) 
   integrated 2x  DD DuoFlex S2 Twin tuner expansion (changeable) 
   integrated CI interface 
   Full version "Digital Devices TV" V1.06 
   external power supply 
   wall Mount 
   manual