TerraTec Cinergy T Stick
TerraTec Cinergy T Stick is a USB 2.0 DVB-T device.
| Vendor Device/Model |
Supported | ID on Interface |
Hardware | Firmware | Comment / Pictures | URL | E |
|---|---|---|---|---|---|---|---|
| TerraTec Cinergy T Stick | ✔ Yes, but see device page for details. | 0ccd:00aa USB2.0 | Afatech AF9035, TUA9001 | 
|
Currently supported by LinuxTV. You should follow method Z, see below.
(TerraTec Cinergy T Stick Black / 0ccd:00a9 is a different device, based on Realtek RTL2832U and Fitipower FC0012)
(TerraTec Cinergy T Stick+ / 0ccd:00d7 is another device, based on Realtek RTL2832U and Elonic E4000)
Based on:
- Afatech AF9033
- Afatech AF9035
- Infineon TUA9001
Install instructions for manufacturer driver
Method Z
As of June 2012, the device is supported by git's version of LinuxTV. It has arrived in the 3.5 kernel released on July 21st 2012 (TODO : test this new kernel and report result).
If you are a Debian user, kernel 3.5 is available in experimental but the module "af9035" is not compiled (as of September 9th 2012), cf my bug report : http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=687050
If you are an Ubuntu user, kernel 3.5 is available in Ubuntu 12.10 "quantal".
If you have a kernel < 3.5, the easiest way to install the driver is to follow the instructions on http://git.linuxtv.org/media_build.git :
You should first install the "git" and "patchutils" packages from your Linux distro. Then :
git clone git://linuxtv.org/media_build.git cd media_build ./build sudo make install
Download the firmware :
cd /lib/firmware sudo wget http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-02.fw
If you plug the device, you should see in your kernel logs :
Jun 15 21:12:35 wide kernel: [ 2747.088349] usb 2-1: new high-speed USB device number 7 using ehci_hcd Jun 15 21:12:35 wide kernel: [ 2747.236040] input: TerraTec Cinergy T-Stick as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.1/input/input15 Jun 15 21:12:35 wide kernel: [ 2747.236272] generic-usb 0003:0CCD:0093.0005: input,hidraw1: USB HID v1.01 Keyboard [TerraTec Cinergy T-Stick] on usb-0000:00:1d.7-1/input1 Jun 15 21:12:35 wide mtp-probe: checking bus 2, device 7: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1" Jun 15 21:12:35 wide mtp-probe: bus: 2, device: 7 was not an MTP device Jun 15 21:12:35 wide kernel: [ 2747.288728] WARNING: You are using an experimental version of the media stack. Jun 15 21:12:35 wide kernel: [ 2747.288730] As the driver is backported to an older kernel, it doesn't offer Jun 15 21:12:35 wide kernel: [ 2747.288732] enough quality for its usage in production. Jun 15 21:12:35 wide kernel: [ 2747.288734] Use it with care. Jun 15 21:12:35 wide kernel: [ 2747.288735] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): Jun 15 21:12:35 wide kernel: [ 2747.288737] 5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control Jun 15 21:12:35 wide kernel: [ 2747.288739] 8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control Jun 15 21:12:35 wide kernel: [ 2747.288741] 0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control Jun 15 21:12:35 wide kernel: [ 2747.292785] WARNING: You are using an experimental version of the media stack. Jun 15 21:12:35 wide kernel: [ 2747.292788] As the driver is backported to an older kernel, it doesn't offer Jun 15 21:12:35 wide kernel: [ 2747.292790] enough quality for its usage in production. Jun 15 21:12:35 wide kernel: [ 2747.292791] Use it with care. Jun 15 21:12:35 wide kernel: [ 2747.292793] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): Jun 15 21:12:35 wide kernel: [ 2747.292795] 5472d3f17845c4398c6a510b46855820920c2181 [media] mt9m032: Implement V4L2_CID_PIXEL_RATE control Jun 15 21:12:35 wide kernel: [ 2747.292797] 8d690c4a4e88297451edd027d37291676bc5b9c4 [media] mt9p031: Implement V4L2_CID_PIXEL_RATE control Jun 15 21:12:35 wide kernel: [ 2747.292799] 0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control Jun 15 21:12:35 wide kernel: [ 2747.295890] dvb-usb: found a 'TerraTec Cinergy T Stick' in cold state, will try to load a firmware Jun 15 21:12:35 wide kernel: [ 2747.315596] dvb-usb: downloading firmware from file 'dvb-usb-af9035-02.fw' Jun 15 21:12:36 wide kernel: [ 2747.641408] af9035: firmware version=11.5.9.0 Jun 15 21:12:36 wide kernel: [ 2747.641440] dvb-usb: found a 'TerraTec Cinergy T Stick' in warm state. Jun 15 21:12:36 wide kernel: [ 2747.641557] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jun 15 21:12:36 wide kernel: [ 2747.642226] DVB: registering new adapter (TerraTec Cinergy T Stick) Jun 15 21:12:36 wide kernel: [ 2747.644507] dvb-usb: MAC address: 00:00:00:00:00:00 Jun 15 21:12:36 wide kernel: [ 2747.658110] af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1 Jun 15 21:12:36 wide kernel: [ 2747.658117] DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))... Jun 15 21:12:36 wide kernel: [ 2747.695418] Infineon TUA 9001 successfully attached. Jun 15 21:12:36 wide kernel: [ 2747.695449] Registered IR keymap rc-empty Jun 15 21:12:36 wide kernel: [ 2747.695662] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0/input16 Jun 15 21:12:36 wide kernel: [ 2747.696071] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0 Jun 15 21:12:36 wide kernel: [ 2747.696080] dvb-usb: TerraTec Cinergy T Stick successfully initialized and connected. Jun 15 21:12:36 wide kernel: [ 2747.714315] usbcore: registered new interface driver dvb_usb_af9035
This method works fine and has prooven to be stable on an Ubuntu 12.04 system (kernel 3.2.0) and an Ubuntu 10.04 system (kernel 2.6.32).
Method A (deprecated)
This method install the same drivers as in section B, with some small patches and a Makefile that directly creates the kernel modules, without compiling a whole kernel. The patches are (as in method B): to support the alternative USB code of the stick; to correct the frequency calculations.
- Download kernel source and headers equal to the ones you are using (check with 'uname -a'); e.g., for a Debian or Ubuntu distribution,
apt-get install linux-source-2.6.30 linux-headers-2.6.30-1-686 kernel-package
- and unpack the kernel source
cd /usr/src ; tar xjf linux-source-2.6.30.tar.bz2
- Download the pre-patched drivers from http://mennucc1.debian.net/terratec_af9035-a_m.tar.gz (formerly http://tonelli.sns.it/pub/mennucc1/terratec_af9035-a_m.tar.gz ) and unpack it
- Edit the Makefile to point to the correct kernel directories
- compile
make
- install (as root)
make install
- Copy firmware (dvb-usb-af9035-01.fw) to /lib/firmware.
Note that currently, with kernel 2.6.30, the remote does not work: the module 'hiddev' recognizes the stick as a keyboard, and offers it as a input device /dev/input/event?? (use 'evtest' to test it).
Patch needed for Kernel >= 3.2
Method B (deprecated)
- Download the driver from Terratec http://linux.terratec.de/files/Cinergy_T_Stick/terratec_af9035.zip
- Apply patch (AF9035-AF9033-TUA9001_DRIVER.patch) to kernel source, ignore the other files.
- Copy firmware (dvb-usb-af9035-01.fw) to /lib/firmware.
- The stick come with two different identifications, either 93 or AA . Check the USB identifier of the stick using 'lsusb' ; if you see 'AA' in a line such as
ID 0ccd:00aa TerraTec Electronic GmbH
then you should edit the file drivers/media/dvb/dvb-usb/dvb-usb-ids.h and change the line from
#define USB_PID_TERRATEC_CINERGY_T_STICK 0x0093
to
#define USB_PID_TERRATEC_CINERGY_T_STICK 0x00AA
- Apply the following patch to the tuner code.
--- a/linux/drivers/media/common/tuners/tua9001.c 2009-07-03 04:04:40.000000000 +0200
+++ b/linux/drivers/media/common/tuners/tua9001.c 2009-07-18 20:41:32.000000000 +0200
@@ -93,6 +93,7 @@
struct tua9001_priv *priv = fe->tuner_priv;
int ret;
u16 val;
+ u32 freq;
u8 i;
struct regdesc data[2];
@@ -117,12 +118,19 @@
data[0].reg = 0x04;
data[0].val = val;
+freq = params->frequency;
+
#define OFFSET 150000000
- val = 0.000048 * (params->frequency - OFFSET);
+freq = freq - OFFSET;
+freq = freq/1000;
+freq = 48 * freq;
+freq = freq/1000;
+
+val = freq;
+
data[1].reg = 0x1f;
data[1].val = val;
- priv->frequency = (val * 20833.33334) + OFFSET;
deb_info("%s: freq:%d bw:%d freq tuner:%d val:%d\n", __func__,
params->frequency, params->u.ofdm.bandwidth, priv->frequency,
- Configure and compile your kernel
- Have a beer
Tested with 2.6.30.1, in case the patches fail just work them in by hand. Don't give up!
Tested with 2.6.30.8, patch fails on file /usr/source/linux-`uname -r`/drivers/media/dvb/frontends/Makefile but it is sufficient to patch it file by hand to make it work. To patch the file add the following line just under line 74 (i.e. at the end of the file):
obj-$(CONFIG_DVB_AF9033) += af9033.o
Method C (deprecated)
Patch for adding device USB IDs to the manufacturer's driver.
72a73
> #define USB_PID_TERRATEC_CINERGY_T 0x0093
78a80
> {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T)},
146c148
< .num_device_descs =1,
---
> .num_device_descs =2,
152a155,159
> {
> .name = "TerraTec Cinergy T-Stick",
> .cold_ids = {&af903x_usb_id_table[5], NULL},
> .warm_ids = {NULL},
> },
Install instructions
- copy above patch to file (e.g. TerraTec_Cinergy_T-Stick.patch) and save it your home directory
- download driver from TerraTec support site
wget http://linux.terratec.de/files/Cinergy_T_Stick/Linux-Driver-for-T-Stick.rar
- extract driver package
unrar x Linux-Driver-for-T-Stick.rar
- enter driver directory
cd Linux_PC_AF9035_Afatech_2008.12.17/
- enter driver directory according to your Kernel architecture
- for 32 bit
cd Linux-32bit_AF9035_20081217/
- for 64 bit
cd Linux-64bit_AF9035_20081217/
- extract driver package
tar zxvf AF903x_SRC.tar.gz
- enter driver directory
cd AF903x_SRC/
- apply patch (from home directory)
patch af903x-devices.c ~/TerraTec_Cinergy_T-Stick.patch
- compile
make
- install (as root)
make install
Device should work if everything goes correctly. Few distribution specific install commands you may wish use:
Fedora:
su -c "make install"
Ubuntu:
sudo make install
Driver does support Kernels from 2.6.16 to 2.6.27. If you have newer Kernel then you could try compile it against 2.6.27 headers (cp v4l/kernel-2.6.27/* ./). In that case there is big risk it doesn't work and crashes your Kernel when device is plugged.
Method D (deprecated)
- Download the driver from Terratec http://linux.terratec.de/files/Cinergy_T_Stick/terratec_af9035.zip
- unzip terratec_af9035.zip
- sudo cp terratec_af9035/dvb-usb-af9035-01.fw /lib/firmware
- cd
- sudo apt-get install mercurial (sudo yum install mercurial)
- hg clone http://linuxtv.org/hg/v4l-dvb
- wget http://openee.googlecode.com/svn-history/r137/trunk/recipes/v4l-dvb/files/v4l-dvb-tua9001.patch
- patch -p0 < v4l-dvb-af9033.patch && patch -p0 < v4l-dvb-af9035.patch && patch -p0 < v4l-dvb-tua9001.patch
- cd v4l-dvb
- make
- sudo make install (sudo -c make install)
now should be ready to merge to main!!!!
Method D has been successfully tested on February 4th 2012 on an Ubuntu 10.04 PC with a Terratec Cinergy T stick USD IDs 0ccd-0093
lsmod shows :
% lsmod Module Size Used by tua9001 3071 1 af9033 17239 1 dvb_usb_af9035 16474 9 dvb_usb 19779 1 dvb_usb_af9035 usbhid 41116 0 dvb_core 102479 1 dvb_usb
Kernel logs show :
Feb 4 11:59:23 cadeau kernel: [ 5995.800330] usb 2-1.1: new high speed USB device using ehci_hcd and address 3 Feb 4 11:59:23 cadeau kernel: [ 5995.917204] usb 2-1.1: configuration #1 chosen from 1 choice Feb 4 11:59:23 cadeau kernel: [ 5996.003244] WARNING: You're using an obsolete driver! You shouldn't be using it! Feb 4 11:59:23 cadeau kernel: [ 5996.003247] If you want anything new, you can use http://git.linuxtv.org/media_build.git. Feb 4 11:59:23 cadeau kernel: [ 5996.003249] The tree is still here just to preserve the development history. Feb 4 11:59:23 cadeau kernel: [ 5996.008523] usbcore: registered new interface driver hiddev Feb 4 11:59:23 cadeau kernel: [ 5996.012123] input: TerraTec Cinergy T-Stick as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input9 Feb 4 11:59:23 cadeau kernel: [ 5996.012253] generic-usb 0003:0CCD:0093.0001: input,hidraw0: USB HID v1.01 Keyboard [TerraTec Cinergy T-Stick] on usb-0000:00:1d.0-1.1/input1 Feb 4 11:59:23 cadeau kernel: [ 5996.012290] usbcore: registered new interface driver usbhid Feb 4 11:59:23 cadeau kernel: [ 5996.012294] usbhid: v2.6:USB HID core driver Feb 4 11:59:23 cadeau kernel: [ 5996.017224] dvb-usb: found a 'TerraTec Cinergy T Stick' in cold state, will try to load a firmware Feb 4 11:59:23 cadeau kernel: [ 5996.017233] usb 2-1.1: firmware: requesting dvb-usb-af9035-01.fw Feb 4 11:59:23 cadeau kernel: [ 5996.034581] dvb-usb: downloading firmware from file 'dvb-usb-af9035-01.fw' Feb 4 11:59:24 cadeau kernel: [ 5996.390597] dvb-usb: found a 'TerraTec Cinergy T Stick' in warm state. Feb 4 11:59:24 cadeau kernel: [ 5996.390696] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Feb 4 11:59:24 cadeau kernel: [ 5996.391317] DVB: registering new adapter (TerraTec Cinergy T Stick) Feb 4 11:59:24 cadeau kernel: [ 5996.412986] af9033: firmware version: LINK:11.15.10.0 OFDM:5.48.10.0 Feb 4 11:59:24 cadeau kernel: [ 5996.491170] DVB: registering adapter 0 frontend 0 (Afatech AF9033 DVB-T)... Feb 4 11:59:24 cadeau kernel: [ 5996.530418] tua9001: Infineon TUA 9001 successfully attached. Feb 4 11:59:24 cadeau kernel: [ 5996.530428] dvb-usb: TerraTec Cinergy T Stick successfully initialized and connected.
sometimes there are errors indicating:
af9035: bulk message failed:-xx af9033: I2C read failed reg:00xx