User talk:HappySmack
Jump to navigation
Jump to search
I need assistance with my Pinnacle PCTV HD Pro Stick (800e) ID 2304:0227
My belief is that I am only lacking firmware. I am running Ubuntu 9.10 AMD64. I have tried the 32 bit firmware. It works on my 32 bit machine, not on the 64. In my attempt to gain 64 bit drivers, I noticed a 64 bit folder in the HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip file. I tried "hacking up" the extract_xc3028.pl script by changing the hash info to match the md5 of the hcw85bda.sys in said folder. It did extract "something" but I don't believe it to be the correct firmware as the the files are obviously different. But I had to try something :).
Anyway, I need 64 bit firmware (I think).
Specs:
HP dv6605us laptop, Ubuntu 9.10 amd64, Nvidia 7150m video, Pinnacle PCTV HD Pro Stick (800e) ID 2304:0227
Also to note, I do have the current v4l2 installed from repository. That and the firmware was all I needed to use on the 32 bit machine. It also ran on this laptop with 32 bit OS. If anyone has or knows how to properly extract the firmware, I would be forever in your debt.
Here is a FULL copy of my Dmesg after a boot with nothing attached then, attaching the adapter and trying Kaffeine. Pinnacle info at : [ 78.450028]
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 (Ubuntu 2.6.31-17.54-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=8d890b7a-d847-41e7-a832-57d9577b2445 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037f50000 (usable) [ 0.000000] BIOS-e820: 0000000037f50000 - 0000000037f65000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037f65000 - 0000000037f66000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f66000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x37f50 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000037f50000 (usable) [ 0.000000] modified: 0000000037f50000 - 0000000037f65000 (ACPI data) [ 0.000000] modified: 0000000037f65000 - 0000000037f66000 (ACPI NVS) [ 0.000000] modified: 0000000037f66000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037f50000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037f50000 page 4k [ 0.000000] kernel direct mapping tables up to 37f50000 @ 8000-b000 [ 0.000000] RAMDISK: 29800000 - 29fbb00e [ 0.000000] ACPI: RSDP 00000000000f8250 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 0000000037f5c110 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 0000000037f649fc 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 0000000037f5c17c 0880C (v01 NVIDIA MCP67 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000037f65fc0 00040 [ 0.000000] ACPI: TCPA 0000000037f64af0 00032 (v01 Phoeni x 06040000 TL 00000000) [ 0.000000] ACPI: SRAT 0000000037f64b22 000A0 (v01 AMD HAMMER 06040000 AMD 00000001) [ 0.000000] ACPI: SSDT 0000000037f64bc2 001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 0000000037f64d86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 0000000037f64dc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 0000000037f64dfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 0000000037f64e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 0000000037f64e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-40000000 [ 0.000000] NUMA: Allocated memnodemap from 9000 - 9840 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037f50000 [ 0.000000] NODE_DATA [0000000000009840 - 000000000000e83f] [ 0.000000] bootmap [000000000000f000 - 0000000000015fef] pages 7 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0037f50000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==> [0001000000 - 00019e4ccc] [ 0.000000] #3 [0029800000 - 0029fbb00e] RAMDISK ==> [0029800000 - 0029fbb00e] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [00019e5000 - 00019e51a0] BRK ==> [00019e5000 - 00019e51a0] [ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] #7 [0000009000 - 0000009840] MEMNODEMAP ==> [0000009000 - 0000009840] [ 0.000000] found SMP MP-table at [ffff8800000f8220] f8220 [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00037f50 [ 0.000000] On node 0 totalpages: 229097 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3835 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3078 pages used for memmap [ 0.000000] DMA32 zone: 222026 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019f0000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 225861 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=8d890b7a-d847-41e7-a832-57d9577b2445 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 1364000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 883612k/916800k available (5315k kernel code, 412k absent, 32776k reserved, 3017k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1800.107 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.003382] Console: colour VGA+ 80x25 [ 0.003385] console [tty0] enabled [ 0.007532] allocated 9175040 bytes of page_cgroup [ 0.007535] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.007722] hpet clockevent registered [ 0.007726] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.007733] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.21 BogoMIPS (lpj=18001070) [ 0.007765] Security Framework initialized [ 0.007790] AppArmor: AppArmor initialized [ 0.007906] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.008551] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.008866] Mount-cache hash table entries: 256 [ 0.009024] Initializing cgroup subsys ns [ 0.009029] Initializing cgroup subsys cpuacct [ 0.009034] Initializing cgroup subsys memory [ 0.009042] Initializing cgroup subsys freezer [ 0.009045] Initializing cgroup subsys net_cls [ 0.009059] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.009062] CPU: L2 Cache: 256K (64 bytes/line) [ 0.009066] CPU 0/0x0 -> Node 0 [ 0.009068] tseg: 0037f80000 [ 0.009070] CPU: Physical Processor ID: 0 [ 0.009072] CPU: Processor Core ID: 0 [ 0.009076] mce: CPU supports 5 MCE banks [ 0.009086] using C1E aware idle routine [ 0.009088] Performance Counters: AMD PMU driver. [ 0.009094] ... version: 0 [ 0.009096] ... bit width: 48 [ 0.009097] ... generic counters: 4 [ 0.009099] ... value mask: 0000ffffffffffff [ 0.009102] ... max period: 00007fffffffffff [ 0.009104] ... fixed-purpose counters: 0 [ 0.009106] ... counter mask: 000000000000000f [ 0.010000] ACPI: Core revision 20090521 [ 0.020075] Setting APIC routing to flat [ 0.020545] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.121354] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 3600.36 BogoMIPS (lpj=18001829) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 256K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.010000] System has AMD C1E enabled [ 0.010000] Switch to broadcast mode on CPU1 [ 0.280489] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 0.280505] Brought up 2 CPUs [ 0.280508] Total of 2 processors activated (7200.57 BogoMIPS). [ 0.280601] CPU0 attaching sched-domain: [ 0.280605] domain 0: span 0-1 level MC [ 0.280608] groups: 0 1 [ 0.280614] CPU1 attaching sched-domain: [ 0.280616] domain 0: span 0-1 level MC [ 0.280618] groups: 1 0 [ 0.280703] Switch to broadcast mode on CPU0 [ 0.280703] Booting paravirtualized kernel on bare hardware [ 0.280703] regulator: core version 0.5 [ 0.280703] Time: 8:15:18 Date: 01/17/10 [ 0.280703] NET: Registered protocol family 16 [ 0.280703] node 0 link 0: io port [1000, fffff] [ 0.280703] TOM: 0000000040000000 aka 1024M [ 0.280703] node 0 link 0: mmio [a0000, bffff] [ 0.280703] node 0 link 0: mmio [40000000, dfffffff] [ 0.280703] node 0 link 0: mmio [e0000000, efffffff] [ 0.280703] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.280703] bus: [00,ff] on node 0 link 0 [ 0.280703] bus: 00 index 0 io port: [0, ffff] [ 0.280703] bus: 00 index 1 mmio: [a0000, bffff] [ 0.280703] bus: 00 index 2 mmio: [40000000, fcffffffff] [ 0.280703] ACPI: bus type pci registered [ 0.280703] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 [ 0.280703] PCI: MCFG area at e0000000 reserved in E820 [ 0.280703] PCI: Using MMCONFIG at e0000000 - e04fffff [ 0.280703] PCI: Using configuration type 1 for base access [ 0.281558] bio: create slab <bio-0> at 0 [ 0.281558] ACPI: EC: Look up EC in DSDT [ 0.284304] ACPI: BIOS _OSI(Linux) query ignored [ 0.285251] ACPI: Interpreter enabled [ 0.285256] ACPI: (supports S0 S3 S4 S5) [ 0.285281] ACPI: Using IOAPIC for interrupt routing [ 0.281558] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.326854] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.326858] ACPI: EC: driver started in interrupt mode [ 0.327244] ACPI: No dock devices found. [ 0.327521] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.327752] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf] [ 0.327764] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f] [ 0.327769] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f] [ 0.327789] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.327795] pci 0000:00:01.1: PME# disabled [ 0.327852] pci 0000:00:01.3: reg 10 32bit mmio: [0xf6200000-0xf627ffff] [ 0.327929] pci 0000:00:02.0: reg 10 32bit mmio: [0xf6486000-0xf6486fff] [ 0.327929] pci 0000:00:02.0: supports D1 D2 [ 0.327929] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:00:02.0: PME# disabled [ 0.327929] pci 0000:00:02.1: reg 10 32bit mmio: [0xf6489000-0xf64890ff] [ 0.327929] pci 0000:00:02.1: supports D1 D2 [ 0.327929] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:00:02.1: PME# disabled [ 0.327929] pci 0000:00:04.0: reg 10 32bit mmio: [0xf6487000-0xf6487fff] [ 0.327929] pci 0000:00:04.0: supports D1 D2 [ 0.327929] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:00:04.0: PME# disabled [ 0.327929] pci 0000:00:04.1: reg 10 32bit mmio: [0xf6489400-0xf64894ff] [ 0.327929] pci 0000:00:04.1: supports D1 D2 [ 0.327929] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:00:04.1: PME# disabled [ 0.327929] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf] [ 0.327929] pci 0000:00:07.0: reg 10 32bit mmio: [0xf6480000-0xf6483fff] [ 0.327929] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.327929] pci 0000:00:07.0: PME# disabled [ 0.327929] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7] [ 0.327929] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7] [ 0.327929] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef] [ 0.327929] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3] [ 0.327929] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df] [ 0.327929] pci 0000:00:09.0: reg 24 32bit mmio: [0xf6484000-0xf6485fff] [ 0.327929] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf6488000-0xf6488fff] [ 0.327929] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff] [ 0.327929] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf6489c00-0xf6489cff] [ 0.327929] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf6489800-0xf648980f] [ 0.327929] pci 0000:00:0a.0: supports D1 D2 [ 0.327929] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:00:0a.0: PME# disabled [ 0.327929] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:00:0c.0: PME# disabled [ 0.327929] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:00:0d.0: PME# disabled [ 0.327929] pci 0000:00:12.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] [ 0.327929] pci 0000:00:12.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.327929] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf4000000-0xf4ffffff] [ 0.327929] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.327929] pci 0000:02:05.0: reg 10 32bit mmio: [0x000000-0x0007ff] [ 0.327929] pci 0000:02:05.0: supports D1 D2 [ 0.327929] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:02:05.0: PME# disabled [ 0.327929] pci 0000:02:05.1: reg 10 32bit mmio: [0xf6100800-0xf61008ff] [ 0.327929] pci 0000:02:05.1: supports D1 D2 [ 0.327929] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:02:05.1: PME# disabled [ 0.327929] pci 0000:02:05.2: reg 10 32bit mmio: [0xf6100c00-0xf6100cff] [ 0.327929] pci 0000:02:05.2: supports D1 D2 [ 0.327929] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:02:05.2: PME# disabled [ 0.327929] pci 0000:02:05.3: reg 10 32bit mmio: [0xf6101000-0xf61010ff] [ 0.327929] pci 0000:02:05.3: supports D1 D2 [ 0.327929] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:02:05.3: PME# disabled [ 0.327929] pci 0000:02:05.4: reg 10 32bit mmio: [0xf6101400-0xf61014ff] [ 0.327929] pci 0000:02:05.4: supports D1 D2 [ 0.327929] pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327929] pci 0000:02:05.4: PME# disabled [ 0.327929] pci 0000:00:08.0: transparent bridge [ 0.327929] pci 0000:00:08.0: bridge 32bit mmio: [0xf6100000-0xf61fffff] [ 0.327929] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff] [ 0.327929] pci 0000:00:0c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff] [ 0.327929] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.327929] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf6003fff] [ 0.327929] pci 0000:03:00.0: supports D1 D2 [ 0.327929] pci 0000:00:0d.0: bridge 32bit mmio: [0xf6000000-0xf60fffff] [ 0.327929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.327929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.327929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.327929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.356472] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 0.356702] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.356933] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 0.357160] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.357387] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.357617] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.357843] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.358069] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.358296] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.358522] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 0.358749] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.358982] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 0.359210] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 0.359437] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 0.359664] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 0.359892] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 0.360140] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 0.360379] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 0.360612] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 0.360840] SCSI subsystem initialized [ 0.370039] libata version 3.00 loaded. [ 0.370053] usbcore: registered new interface driver usbfs [ 0.370053] usbcore: registered new interface driver hub [ 0.370053] usbcore: registered new device driver usb [ 0.370099] ACPI: WMI: Mapper loaded [ 0.370102] PCI: Using ACPI for IRQ routing [ 0.400009] Bluetooth: Core ver 2.15 [ 0.410016] NET: Registered protocol family 31 [ 0.410018] Bluetooth: HCI device and connection manager initialized [ 0.410022] Bluetooth: HCI socket layer initialized [ 0.410024] NetLabel: Initializing [ 0.410026] NetLabel: domain hash size = 128 [ 0.410028] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.410044] NetLabel: unlabeled traffic allowed by default [ 0.410247] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.410252] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.450020] Switched to high resolution mode on CPU 0 [ 0.450036] Switched to high resolution mode on CPU 1 [ 0.462530] pnp: PnP ACPI init [ 0.462551] ACPI: bus type pnp registered [ 0.467124] pnp: PnP ACPI: found 12 devices [ 0.467128] ACPI: ACPI bus type pnp unregistered [ 0.467142] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved [ 0.467149] system 00:03: ioport range 0x1000-0x107f has been reserved [ 0.467152] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 0.467156] system 00:03: ioport range 0x1400-0x147f has been reserved [ 0.467159] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 0.467163] system 00:03: ioport range 0x1800-0x187f has been reserved [ 0.467166] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 0.467172] system 00:04: ioport range 0x360-0x361 has been reserved [ 0.467179] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.467188] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.467192] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.467196] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.467199] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.467203] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.471910] AppArmor: AppArmor Filesystem Enabled [ 0.471959] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02 [ 0.471962] pci 0000:00:08.0: IO window: disabled [ 0.471967] pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff [ 0.471970] pci 0000:00:08.0: PREFETCH window: disabled [ 0.471974] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.471978] pci 0000:00:0c.0: IO window: 0x4000-0x4fff [ 0.471982] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff [ 0.471986] pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.471991] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 [ 0.471994] pci 0000:00:0d.0: IO window: disabled [ 0.471998] pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff [ 0.472001] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.472010] pci 0000:00:08.0: setting latency timer to 64 [ 0.472016] pci 0000:00:0c.0: setting latency timer to 64 [ 0.472022] pci 0000:00:0d.0: setting latency timer to 64 [ 0.472026] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.472030] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.472033] pci_bus 0000:02: resource 1 mem: [0xf6100000-0xf61fffff] [ 0.472036] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.472040] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.472043] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.472046] pci_bus 0000:04: resource 1 mem: [0xf2000000-0xf3ffffff] [ 0.472049] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.472052] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf60fffff] [ 0.472099] NET: Registered protocol family 2 [ 0.472228] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.472957] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.474100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.474632] TCP: Hash tables configured (established 131072 bind 65536) [ 0.474636] TCP reno registered [ 0.474743] NET: Registered protocol family 1 [ 0.474822] Trying to unpack rootfs image as initramfs... [ 0.701955] Freeing initrd memory: 7916k freed [ 0.706340] Simple Boot Flag at 0x36 set to 0x1 [ 0.706568] Scanning for low memory corruption every 60 seconds [ 0.706722] audit: initializing netlink socket (disabled) [ 0.706741] type=2000 audit(1263716117.702:1): initialized [ 0.717225] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.718986] VFS: Disk quotas dquot_6.5.2 [ 0.719061] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.719836] fuse init (API version 7.12) [ 0.719936] msgmni has been set to 1741 [ 0.720263] alg: No test for stdrng (krng) [ 0.720279] io scheduler noop registered [ 0.720282] io scheduler anticipatory registered [ 0.720284] io scheduler deadline registered [ 0.720337] io scheduler cfq registered (default) [ 0.720496] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.720550] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.720611] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.720677] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.720748] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.720824] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.720831] pci 0000:00:12.0: Boot video device [ 0.721014] alloc irq_desc for 24 on node 0 [ 0.721017] alloc kstat_irqs on node 0 [ 0.721027] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.721033] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.721185] alloc irq_desc for 25 on node 0 [ 0.721187] alloc kstat_irqs on node 0 [ 0.721193] pcieport-driver 0000:00:0d.0: irq 25 for MSI/MSI-X [ 0.721199] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 0.721283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.721313] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.722949] ACPI: AC Adapter [ACAD] (on-line) [ 0.723050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.723054] ACPI: Power Button [PWRF] [ 0.723116] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.723120] ACPI: Sleep Button [SLPB] [ 0.723169] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.724098] ACPI: Lid Switch [LID] [ 0.724170] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 0.724173] ACPI: Power Button [PWRB] [ 0.724573] ACPI: processor limited to max C-state 1 [ 0.724620] processor LNXCPU:00: registered as cooling_device0 [ 0.724626] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.724718] processor LNXCPU:01: registered as cooling_device1 [ 0.724724] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.730514] ACPI Exception: AE_OK, No or invalid critical threshold 20090521 thermal-384 [ 0.732005] Linux agpgart interface v0.103 [ 0.732020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.733400] brd: module loaded [ 0.733915] loop: module loaded [ 0.734017] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.734176] ahci 0000:00:09.0: version 3.0 [ 0.734651] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 0.734656] alloc irq_desc for 23 on node 0 [ 0.734658] alloc kstat_irqs on node 0 [ 0.734669] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 0.734706] alloc irq_desc for 26 on node 0 [ 0.734708] alloc kstat_irqs on node 0 [ 0.734714] ahci 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.734720] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 0.734777] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 0.734782] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part [ 0.734786] ahci 0000:00:09.0: setting latency timer to 64 [ 0.735298] scsi0 : ahci [ 0.735446] scsi1 : ahci [ 0.735513] scsi2 : ahci [ 0.735578] scsi3 : ahci [ 0.735721] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 26 [ 0.735725] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 26 [ 0.735729] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 26 [ 0.735733] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 26 [ 0.736075] pata_amd 0000:00:06.0: version 0.4.1 [ 0.736121] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.736232] scsi4 : pata_amd [ 0.736552] scsi5 : pata_amd [ 0.736985] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 0.736988] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 0.737844] Fixed MDIO Bus: probed [ 0.737922] PPP generic driver version 2.4.2 [ 0.738055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.738629] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 0.738635] alloc irq_desc for 22 on node 0 [ 0.738638] alloc kstat_irqs on node 0 [ 0.738649] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 0.738670] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.738674] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.738775] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.738809] ehci_hcd 0000:00:02.1: debug port 1 [ 0.738813] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.738838] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 0.750052] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.750146] usb usb1: configuration #1 chosen from 1 choice [ 0.750179] hub 1-0:1.0: USB hub found [ 0.750192] hub 1-0:1.0: 7 ports detected [ 0.750802] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 0.750808] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 [ 0.750829] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.750832] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.750894] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.750928] ehci_hcd 0000:00:04.1: debug port 1 [ 0.750932] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.750942] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 0.770038] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.770124] usb usb2: configuration #1 chosen from 1 choice [ 0.770164] hub 2-0:1.0: USB hub found [ 0.770173] hub 2-0:1.0: 2 ports detected [ 0.770255] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.770786] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 0.770792] alloc irq_desc for 18 on node 0 [ 0.770794] alloc kstat_irqs on node 0 [ 0.770806] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 0.770827] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.770830] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.770896] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.770929] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 0.832109] usb usb3: configuration #1 chosen from 1 choice [ 0.832146] hub 3-0:1.0: USB hub found [ 0.832157] hub 3-0:1.0: 7 ports detected [ 0.832734] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 0.832741] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18 [ 0.832761] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.832765] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.832831] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.832849] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 0.892287] usb usb4: configuration #1 chosen from 1 choice [ 0.892319] hub 4-0:1.0: USB hub found [ 0.892330] hub 4-0:1.0: 2 ports detected [ 0.892410] uhci_hcd: USB Universal Host Controller Interface driver [ 0.892551] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.910761] ata5.00: ATAPI: PIONEER DVDRW DVR-K17B, 1.02, max MWDMA2 [ 0.910789] ata5: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 0.919347] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.919354] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.919444] mice: PS/2 mouse device common for all mice [ 0.919590] rtc_cmos 00:07: RTC can wake from S4 [ 0.919638] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.919676] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.919836] device-mapper: uevent: version 1.0.3 [ 0.920870] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.920984] device-mapper: multipath: version 1.1.0 loaded [ 0.920987] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.921175] cpuidle: using governor ladder [ 0.921178] cpuidle: using governor menu [ 0.921689] TCP cubic registered [ 0.921852] NET: Registered protocol family 10 [ 0.922364] lo: Disabled Privacy Extensions [ 0.922722] NET: Registered protocol family 17 [ 0.922750] Bluetooth: L2CAP ver 2.13 [ 0.922752] Bluetooth: L2CAP socket layer initialized [ 0.922755] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.922757] Bluetooth: SCO socket layer initialized [ 0.922814] Bluetooth: RFCOMM TTY layer initialized [ 0.922817] Bluetooth: RFCOMM socket layer initialized [ 0.922819] Bluetooth: RFCOMM ver 1.11 [ 0.922841] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 processors (2 cpu cores) (version 2.20.00) [ 0.922890] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x11 [ 0.922892] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x12 [ 0.922895] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a [ 0.923065] PM: Resume from disk failed. [ 0.923080] registered taskstats version 1 [ 0.923257] Magic number: 10:810:270 [ 0.923366] rtc_cmos 00:07: setting system clock to 2010-01-17 08:15:19 UTC (1263716119) [ 0.923369] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.923371] EDD information not available. [ 0.940250] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.950305] ata5.00: configured for MWDMA2 [ 1.013983] ACPI: Battery Slot [BAT0] (battery present) [ 1.080034] ata2: SATA link down (SStatus 0 SControl 300) [ 1.080054] ata4: SATA link down (SStatus 0 SControl 300) [ 1.080068] ata3: SATA link down (SStatus 0 SControl 300) [ 1.260029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.260635] ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100 [ 1.260639] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.261368] ata1.00: configured for UDMA/100 [ 1.261499] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5 [ 1.261671] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.261685] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.261737] sd 0:0:0:0: [sda] Write Protect is off [ 1.261740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.261766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.261927] sda: [ 1.267741] scsi 4:0:0:0: CD-ROM PIONEER DVDRW DVR-K17B 1.02 PQ: 0 ANSI: 5 [ 1.286045] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.286049] Uniform CD-ROM driver Revision: 3.20 [ 1.286163] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.286223] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.286272] ata6: port disabled. ignoring. [ 1.289072] sda1 sda2 < sda5 sda6 > sda3 [ 1.329435] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.329475] Freeing unused kernel memory: 660k freed [ 1.329825] Write protecting the kernel read-only data: 7584k [ 1.504240] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.504739] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.504745] alloc irq_desc for 20 on node 0 [ 1.504748] alloc kstat_irqs on node 0 [ 1.504761] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 1.504766] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.582256] ohci1394 0000:02:05.0: enabling device (0100 -> 0102) [ 1.582714] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 1.582729] ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 1.611782] acpi device:25: registered as cooling_device2 [ 1.611960] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input6 [ 1.612005] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 1.642072] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.031214] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:fc:e8:07 [ 2.031220] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 2.772322] xor: automatically using best checksumming function: generic_sse [ 2.820004] generic_sse: 5628.800 MB/sec [ 2.820006] xor: using function: generic_sse (5628.800 MB/sec) [ 2.823325] device-mapper: dm-raid45: initialized v0.2594b [ 2.982667] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0022eba300] [ 3.048713] PM: Starting manual resume from disk [ 3.048719] PM: Resume from partition 8:6 [ 3.048721] PM: Checking hibernation image. [ 3.048914] PM: Resume from disk failed. [ 3.074270] EXT4-fs (sda5): barriers enabled [ 3.090812] kjournald2 starting: pid 412, dev sda5:8, commit interval 5 seconds [ 3.090828] EXT4-fs (sda5): delayed allocation enabled [ 3.090832] EXT4-fs: file extents enabled [ 3.102277] EXT4-fs: mballoc enabled [ 3.102301] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 3.874584] type=1505 audit(1263716122.450:2): operation="profile_load" pid=435 name=/usr/share/gdm/guest-session/Xsession [ 3.877495] type=1505 audit(1263716122.450:3): operation="profile_load" pid=436 name=/sbin/dhclient3 [ 3.877835] type=1505 audit(1263716122.450:4): operation="profile_load" pid=436 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.878025] type=1505 audit(1263716122.450:5): operation="profile_load" pid=436 name=/usr/lib/connman/scripts/dhclient-script [ 3.956377] type=1505 audit(1263716122.529:6): operation="profile_load" pid=437 name=/usr/bin/evince [ 3.961897] type=1505 audit(1263716122.529:7): operation="profile_load" pid=437 name=/usr/bin/evince-previewer [ 3.965255] type=1505 audit(1263716122.539:8): operation="profile_load" pid=437 name=/usr/bin/evince-thumbnailer [ 3.991420] type=1505 audit(1263716122.559:9): operation="profile_load" pid=439 name=/usr/lib/cups/backend/cups-pdf [ 23.330955] Adding 136512k swap on /dev/sda6. Priority:-1 extents:1 across:136512k [ 23.609345] EXT4-fs (sda5): internal journal on sda5:8 [ 23.806889] udev: starting version 147 [ 24.221237] lp: driver loaded but no devices found [ 24.710389] lib80211: common routines for IEEE802.11 drivers [ 24.710395] lib80211_crypt: registered algorithm 'NULL' [ 24.733844] EDAC MC: Ver: 2.1.0 Dec 10 2009 [ 24.737019] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 24.737049] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 24.766240] sdhci: Secure Digital Host Controller Interface driver [ 24.766244] sdhci: Copyright(c) Pierre Ossman [ 24.766898] ricoh-mmc: Ricoh MMC Controller disabling driver [ 24.766901] ricoh-mmc: Copyright(c) Philip Langdale [ 24.767604] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 24.767626] ricoh-mmc: Controller is now disabled. [ 24.770192] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22) [ 24.770652] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 24.770667] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 24.772789] Registered led device: mmc0:: [ 24.773835] mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO [ 24.786033] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 25.460389] nvidia: module license 'NVIDIA' taints kernel. [ 25.460395] Disabling lock debugging due to kernel taint [ 25.718420] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 25.718428] alloc irq_desc for 16 on node 0 [ 25.718431] alloc kstat_irqs on node 0 [ 25.718443] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 25.718450] nvidia 0000:00:12.0: setting latency timer to 64 [ 25.718712] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 25.791304] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 25.791311] alloc irq_desc for 19 on node 0 [ 25.791313] alloc kstat_irqs on node 0 [ 25.791326] wl 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 25.791333] wl 0000:03:00.0: setting latency timer to 64 [ 25.793735] EDAC amd64_edac: Ver: 3.2.0 Dec 10 2009 [ 25.801113] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 25.801121] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 25.801125] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 25.801127] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 25.801128] Might be a BIOS bug, if BIOS says ECC is enabled [ 25.801129] Use of the override can cause unknown side effects. [ 25.803368] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 26.036978] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.088393] lib80211_crypt: registered algorithm 'TKIP' [ 26.088721] eth1: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9 [ 26.094628] udev: renamed network interface eth1 to eth3 [ 26.598998] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 26.599006] alloc irq_desc for 21 on node 0 [ 26.599009] alloc kstat_irqs on node 0 [ 26.599022] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 26.599072] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 26.789480] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 26.836667] alloc irq_desc for 27 on node 0 [ 26.836672] alloc kstat_irqs on node 0 [ 26.836683] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X [ 26.836889] eth0: no link during initialization. [ 26.837398] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.015365] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 27.337791] __ratelimit: 9 callbacks suppressed [ 27.337796] type=1505 audit(1263734145.909:13): operation="profile_replace" pid=974 name=/usr/share/gdm/guest-session/Xsession [ 27.340077] type=1505 audit(1263734145.909:14): operation="profile_replace" pid=975 name=/sbin/dhclient3 [ 27.340413] type=1505 audit(1263734145.909:15): operation="profile_replace" pid=975 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 27.340607] type=1505 audit(1263734145.909:16): operation="profile_replace" pid=975 name=/usr/lib/connman/scripts/dhclient-script [ 27.345852] type=1505 audit(1263734145.919:17): operation="profile_replace" pid=976 name=/usr/bin/evince [ 27.351331] type=1505 audit(1263734145.919:18): operation="profile_replace" pid=976 name=/usr/bin/evince-previewer [ 27.354742] type=1505 audit(1263734145.929:19): operation="profile_replace" pid=976 name=/usr/bin/evince-thumbnailer [ 27.361810] type=1505 audit(1263734145.929:20): operation="profile_replace" pid=978 name=/usr/lib/cups/backend/cups-pdf [ 27.362228] type=1505 audit(1263734145.929:21): operation="profile_replace" pid=978 name=/usr/sbin/cupsd [ 27.367136] type=1505 audit(1263734145.939:22): operation="profile_replace" pid=979 name=/usr/sbin/mysqld-akonadi [ 28.913465] usplash:364 freeing invalid memtype ffffffffd0000000-ffffffffd8000000 [ 32.544288] ppdev: user-space parallel port driver [ 37.042523] eth3: no IPv6 routers present [ 78.450028] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 78.611455] usb 1-1: configuration #1 chosen from 1 choice [ 78.716065] Linux video capture interface: v2.00 [ 78.755037] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0) [ 78.755373] em28xx #0: chip ID is em2882/em2883 [ 78.960167] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c [ 78.960178] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 [ 78.960188] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 [ 78.960197] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [ 78.960206] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 78.960215] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 78.960223] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 [ 78.960232] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 [ 78.960241] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 [ 78.960250] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 [ 78.960259] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 35 00 30 00 [ 78.960268] em28xx #0: i2c eeprom b0: 31 00 39 00 39 00 35 00 35 00 37 00 31 00 00 00 [ 78.960277] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 78.960285] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 78.960294] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 78.960303] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 78.960313] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xaee5acbf [ 78.960316] em28xx #0: EEPROM info: [ 78.960317] em28xx #0: AC97 audio (5 sample rates) [ 78.960319] em28xx #0: 500mA max power [ 78.960322] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a [ 78.961037] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17) [ 78.978475] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0) [ 78.989465] tuner 6-0061: chip found @ 0xc2 (em28xx #0) [ 79.023778] xc2028 6-0061: creating new instance [ 79.023783] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner [ 79.023795] usb 1-1: firmware: requesting xc3028-v27.fw [ 79.083495] xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 79.142528] xc2028 6-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 94.002549] Clocksource tsc unstable (delta = -278049517 ns) [ 131.680201] xc2028 6-0061: i2c output error: rc = -110 (should be 4) [ 131.680212] xc2028 6-0061: -110 returned from send [ 131.680223] xc2028 6-0061: Error -22 while loading base firmware [ 131.774010] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/input/input8 [ 131.805949] em28xx #0: Config register raw data: 0xffffffb9 [ 131.837747] em28xx #0: AC97 chip type couldn't be determined [ 131.837759] em28xx #0: Unknown AC97 audio processor detected! [ 131.869771] em28xx #0: couldn't setup AC97 register 2 [ 131.901711] em28xx #0: couldn't setup AC97 register 4 [ 131.933703] em28xx #0: couldn't setup AC97 register 6 [ 131.965682] em28xx #0: couldn't setup AC97 register 54 [ 132.003465] em28xx #0: couldn't setup AC97 register 56 [ 132.035878] xc2028 6-0061: destroying instance [ 132.035918] em28xx #0: em28xx_init_dev: Error while setting audio - errCode [-71]! [ 132.035931] em28xx #0: v4l2 driver version 0.1.2 [ 132.067629] em28xx #0: cannot change alternate number to 6 (error=-71) [ 132.547408] em28xx #0: couldn't setup AC97 register 2 [ 132.613355] em28xx #0: couldn't setup AC97 register 4 [ 132.645338] em28xx #0: couldn't setup AC97 register 6 [ 132.677339] em28xx #0: couldn't setup AC97 register 54 [ 132.709318] em28xx #0: couldn't setup AC97 register 56 [ 133.317235] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [ 133.317306] usbcore: registered new interface driver em28xx [ 133.317315] em28xx driver loaded [ 133.377929] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 133.377938] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 133.378814] Em28xx: Initialized (Em28xx Audio Extension) extension [ 133.428140] em28xx #0: cannot change alternate number to 0 (error=-71) [ 133.628826] em28xx #0: cannot change alternate number to 6 (error=-71) [ 134.140601] em28xx #0: cannot change alternate number to 0 (error=-71) [ 134.172595] lgdt330x: i2c_read_demod_bytes: addr 0x0e select 0x02 error (ret == -71) [ 134.172881] em28xx #0/2: dvb frontend not attached. Can't attach xc3028 [ 134.172895] Em28xx: Initialized (Em28xx dvb Extension) extension [ 134.204571] em28xx #0: couldn't setup AC97 register 2 [ 134.268522] em28xx #0: couldn't setup AC97 register 4 [ 134.300525] em28xx #0: couldn't setup AC97 register 6 [ 134.332496] em28xx #0: couldn't setup AC97 register 54 [ 134.364483] em28xx #0: couldn't setup AC97 register 56 [ 134.396455] Error while configuring em28xx mixer [ 134.429480] em28xx #0: couldn't setup AC97 register 2 [ 134.461437] em28xx #0: couldn't setup AC97 register 4 [ 134.493419] em28xx #0: couldn't setup AC97 register 6 [ 134.525412] em28xx #0: couldn't setup AC97 register 54 [ 134.557389] em28xx #0: couldn't setup AC97 register 56 [ 134.589374] Error while configuring em28xx mixer
I believe the output from lsusb -v is the same as posted elsewhere on this site and I think this is long enough.