Wiki - New Device Copy & Paste Template
Usage:
- Once you have logged in to the wiki, open another browser tab or window and, in which, start creating a new device article
- Next, return to this article and click the "view source" tab at the top of the page. Then, copy the entire contents from the box displaying this page's wiki source code
- Then switch back to the new device page you are creating and, within the editing box at the bottom of it's page, paste the entire page code contents that you've just copied from the "New Device Copy & Paste Template" article
- Proceed then to edit your new device article page by filling in the various sections, replacing the template examples, with information relevant for the new device you are adding to the wiki. Be sure to delete the green italic directional comment sections provided by the template (as well as this notice)
First, if possible, we would like a good overall image of what the device looks like (Note: do NOT use proprietary images unless you have obtained permission to do so).
Next, provide a brief summary of what the device is and by whom it is provided (include wiki links to the card type and the vendor -- and, ideally, after you have finished editing this page, you should add links from those pages back to this one).
The last introductory piece of information is the all important indication of whether or not the device is supported under Linux. Here's an example:
The ATSC 115 is supported under Linux since kernel 2.6.24.
Note: The page contents menu will automagically build itself, so you need not worry about it
Overview/Features
Discuss the features and facets of the device here. For example:
- PCI interface
- Inputs: Antenna (Composite), Remote and S-Video In
Components Used
List the hardware ICs used by the device here. For example:
- Quantek QT1010 (tuner)
- Intel/Zarlink MT352 (demodulator)
- NXP/Philips SAA7130HL (A/V decoder and PCI Interface)
Other Images
Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:
VideoMate DVB-T220 Box
VideoMate DVB-T220 Remote
Identification
Provide here, for PCI/PCIe devices, the relevant output of lspci -vnn or, in the case of USB devices, lsusb -v . We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:
# lspci -vvvnn 04:03.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) Subsystem: Compro Technology, Inc. Videomate DVB-T200 [185b:c901] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 84 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Making it Work
Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)
Firmware
Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.
Drivers
Discuss the kernel driver modules used by the device here. Provide the details of where the drivers, any patches, and any other necessary tools are available.
Sample Kernel Output
Provide the relevant portion of dmesg here. For example:
# dmesg [ 45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded [ 45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000 [ 45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected] [ 45.569753] saa7130[0]: board init: gpio is 843f00 [ 45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7 [ 45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff [ 45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff [ 45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom [ 45.755532] saa7130[0]: registered device video0 [v4l2] [ 45.755550] saa7130[0]: registered device vbi0 [ 45.873425] saa7134 ALSA driver for DMA sound loaded [ 45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2 [ 45.943354] saa7130[0]/dvb: frontend initialization failed
Remote Control Support
Discuss support for the remote control here.
An Appropriate Title
If deemed necessary, create an additional heading (using an appropriate title) and add anything else that you think might be relevant
External Links
Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:
Finally, the very last thing is to add a category. (Remove the nowiki tags). For example
[[Category:DVB-T PCI Devices]]