View source for Canopus KTVX-CB (aka ITACHU) CardBus

== Card features ==
* Cardbus interface
* TV, Composite video, S-Video and RCA audio inputs
* Name :)  板ちゅー or 板ちゅ～
* [http://www.canopus.co.jp/catalog/ktvx1000/ktvx-cb_index.htm More infomation ] in [http://www.canopus.co.jp/ Canopus  website]

== # lspci -vvv ==
 02:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev 10)
        Subsystem: Canopus Co., Ltd Unknown device 150c
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at 22000000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=3 PME-

== # dmesg (with no manual config , v4l2 driver version 0.2.14) ==
 saa7130/34: v4l2 driver version 0.2.14 loaded
 saa7133[0]: found at 0000:02:00.0, rev: 16, irq: 9, latency: 64, mmio: 0x22000000
 saa7133[0]: subsystem: 114b:150c, board: UNKNOWN/GENERIC [card=0,autodetected]
 saa7133[0]: board init: gpio is 20000
 tuner 1-004b: chip found @ 0x96 (saa7133[0])
 saa7133[0]: i2c eeprom 00: 4b 11 0c 15 ff ff ff ff ff ff ff ff ff ff ff ff
 saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 tuner 1-004b: tuner type not set
 tuner 1-004b: tuner type not set
 saa7133[0]: registered device video0 [v4l2]
 saa7133[0]: registered device vbi0

== How to make it work ==
=== Example Linux 2.6.18-4 Debian etch ===
* make /etc/modprobe.d/saa7134
 options saa7134 card=79 disable_ir=1
 install saa7134 /sbin/modprobe --ignore-install saa7134; /sbin/modprobe saa7134-alsa
* exec modprove saa7134
Now ,you can capture video and audio from KTVX-CB.

== External Links ==
* [http://www.canopus.co.jp/catalog/ktvx1000/ktvx-cb_index.htm Canopus product page (Japanese)]