Hauppauge WinTV-HVR-900: Difference between revisions
Jump to navigation
Jump to search
(New page: A USB 2.0 DVB-T device by Hauppauge. Apparently two versions are sold under the HVR-900 name: models 65008 & 65018. Currently not supported by LinuxTV. ...) |
(Analog is supported now, and newer versions use a drx397x) |
||
| Line 3: | Line 3: | ||
Apparently two versions are sold under the HVR-900 name: models 65008 & 65018. |
Apparently two versions are sold under the HVR-900 name: models 65008 & 65018. |
||
Currently not supported by LinuxTV |
Currently, analog (but not DVB-T) is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following [[Xceive XC3028/XC2028|these instructions]]. |
||
Experimental out of tree support for DVB-T also exists; see [http://mcentral.de/wiki/index.php/Em2880 here]. |
|||
Based on: |
Based on: |
||
* Empiatech Em2880 usb bridge |
* Empiatech Em2880 usb bridge |
||
* Xceive [[Xceive XC3028|XC3028]] tuner and analog IF demodulator |
* Xceive [[Xceive XC3028|XC3028]] tuner and analog IF demodulator |
||
* Zarlink DVB-T demodulator |
* Zarlink DVB-T demodulator (in original version) or Micronas drx397x DVB-T demodulator (newer versions) |
||
Revision as of 13:24, 27 February 2008
A USB 2.0 DVB-T device by Hauppauge.
Apparently two versions are sold under the HVR-900 name: models 65008 & 65018.
Currently, analog (but not DVB-T) is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following these instructions. Experimental out of tree support for DVB-T also exists; see here.
Based on:
- Empiatech Em2880 usb bridge
- Xceive XC3028 tuner and analog IF demodulator
- Zarlink DVB-T demodulator (in original version) or Micronas drx397x DVB-T demodulator (newer versions)