Pinnacle PCTV HD Pro Stick (800e): Difference between revisions
m (fix link) |
(djh - since the em28xx-new tree is no longer available, there is no value in suggesting it to users anymore.) |
||
(11 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
[[Image:Pinnaclepctvhdstick.JPG|thumb|240px|Pinnacle PCTV HD Pro Stick (800e)]] |
|||
A hybrid [[ATSC]] [[ATSC USB Devices|USB device]]. |
|||
A hybrid [[ATSC]] [[ATSC USB Devices|USB 2.0 device]] by [[Pinnacle]]. |
|||
This USB 2.0 stick is currently unsupported by LinuxTV, however, experimental support for the device exists (see [http://mcentral.de/wiki/index.php/Em2880 here]). |
|||
Support for the digital functionality of this device was added to the LinuxTV codebase on June 5, 2008 (hg 2aa420c58fc6), and is available in kernel 2.6.27 [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4fd305b2a2c4d16e8d4ebc95c84f946edd3385c5]. |
|||
The device identifies itself as a "PCTV 800e" and the subsystem information provided by <code>lsusb -v</code> is 2304:0227. |
|||
The USB stick consists of two boards: one with the USB and A/V connectors, the other with the RF connector. The two boards are joined(soldered) together with two 7 pin headers, one on each side of the board. I ([[User:Emeitner]]) am unwilling to unsolder the pins and risk damaging the device, so whatever is inside the "sandwich" is still unknown. But visible chips include: |
|||
* [[Xceive]] [[Xceive XC3028|xc3028ACQ]] (tuner and analog IF demodulator) |
|||
* LG DT3303 (digital demodulator) |
|||
* There is also a CPLD: lc4032v |
|||
{{Note| This device identifies itself as a "PCTV 800e" and the subsystem information provided by <code>lsusb -v</code> is 2304:0227. Pinnacle has released a newer revision of the device with the exact same name and branding, but which is not covered by this driver. Information on that other version of the device (USB ID 2304:023a) can be found in the [[Pinnacle PCTV HD Pro Stick (801e)]] article.}} |
|||
In all likelihood, the device is identical, or near identical, to the [[Hauppauge WinTV-HVR-950]] and [[Elgato EyeTV Hybrid US]]. |
|||
===Pinnacle PCTV HD Stick=== |
|||
This looks to be the exact same as the "Pro" stick sans the remote and a/v cables. |
|||
==Overview/Features== |
|||
This device supports [[ATSC]] (i.e. [[OTA]] [[Digital TV]]) and analog NTSC. It also has a connector on the side for an A/V cable dongle. The package includes a small dipole antenna and a short [[USB]] extension cable, as well as a remote control. |
|||
Card connectors/inputs: |
|||
* TV antenna input(F-connector) |
|||
* A/V adaptor, providing: |
|||
** S-Video |
|||
** Composite Video (RCA) |
|||
** Stereo audio(3.5mm plug) |
|||
* IR-Remote Sensor |
|||
The device is functionally identical to the [[Hauppauge WinTV-HVR-950]] and [[Elgato EyeTV Hybrid US]]. |
|||
==Components used== |
|||
* Xceive xc3028ACQ (tuner & analog demodulator) |
|||
* LG DT3303 (digital demodulator) |
|||
* Texas Instruments tvp5150 (video decoder) |
|||
* Empiatech em2883 (USB bridge and analog audio) |
|||
===Other Images=== |
|||
* See [http://erik.wanderings.us/pub/PCTVHDPro/ here for some Hi resolution shots, inside and out] |
|||
===Identification=== |
|||
<pre> |
|||
lsusb -v |
|||
Bus 007 Device 020: ID 2304:0227 Pinnacle Systems, Inc. [hex] PCTV for Mac, HD Stick |
|||
Device Descriptor: |
|||
bLength 18 |
|||
bDescriptorType 1 |
|||
bcdUSB 2.00 |
|||
bDeviceClass 0 (Defined at Interface level) |
|||
bDeviceSubClass 0 |
|||
bDeviceProtocol 0 |
|||
bMaxPacketSize0 64 |
|||
idVendor 0x2304 Pinnacle Systems, Inc. [hex] |
|||
idProduct 0x0227 PCTV for Mac, HD Stick |
|||
bcdDevice 1.10 |
|||
iManufacturer 3 Pinnacle Systems |
|||
iProduct 1 PCTV 800e |
|||
iSerial 2 070101017994 |
|||
bNumConfigurations 1 |
|||
Configuration Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 2 |
|||
wTotalLength 305 |
|||
bNumInterfaces 1 |
|||
bConfigurationValue 1 |
|||
iConfiguration 0 |
|||
bmAttributes 0x80 |
|||
(Bus Powered) |
|||
MaxPower 500mA |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 0 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0000 1x 0 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0000 1x 0 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0000 1x 0 bytes |
|||
bInterval 1 |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 1 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0000 1x 0 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x00c4 1x 196 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0234 1x 564 bytes |
|||
bInterval 1 |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 2 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0ad4 2x 724 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x00c4 1x 196 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0234 1x 564 bytes |
|||
bInterval 1 |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 3 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0c00 2x 1024 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x00c4 1x 196 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0234 1x 564 bytes |
|||
bInterval 1 |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 4 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x1300 3x 768 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x00c4 1x 196 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0234 1x 564 bytes |
|||
bInterval 1 |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 5 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x135c 3x 860 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x00c4 1x 196 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0234 1x 564 bytes |
|||
bInterval 1 |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 6 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x13c4 3x 964 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x00c4 1x 196 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0234 1x 564 bytes |
|||
bInterval 1 |
|||
Interface Descriptor: |
|||
bLength 9 |
|||
bDescriptorType 4 |
|||
bInterfaceNumber 0 |
|||
bAlternateSetting 7 |
|||
bNumEndpoints 4 |
|||
bInterfaceClass 255 Vendor Specific Class |
|||
bInterfaceSubClass 0 |
|||
bInterfaceProtocol 255 |
|||
iInterface 0 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x81 EP 1 IN |
|||
bmAttributes 3 |
|||
Transfer Type Interrupt |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0001 1x 1 bytes |
|||
bInterval 11 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x82 EP 2 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x1400 3x 1024 bytes |
|||
bInterval 1 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x83 EP 3 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x00c4 1x 196 bytes |
|||
bInterval 4 |
|||
Endpoint Descriptor: |
|||
bLength 7 |
|||
bDescriptorType 5 |
|||
bEndpointAddress 0x84 EP 4 IN |
|||
bmAttributes 1 |
|||
Transfer Type Isochronous |
|||
Synch Type None |
|||
Usage Type Data |
|||
wMaxPacketSize 0x0234 1x 564 bytes |
|||
bInterval 1 |
|||
Device Qualifier (for other device speed): |
|||
bLength 10 |
|||
bDescriptorType 6 |
|||
bcdUSB 2.00 |
|||
bDeviceClass 0 (Defined at Interface level) |
|||
bDeviceSubClass 0 |
|||
bDeviceProtocol 0 |
|||
bMaxPacketSize0 64 |
|||
bNumConfigurations 1 |
|||
Device Status: 0x0000 |
|||
(Bus Powered) |
|||
</pre> |
|||
==Making it Work== |
|||
===Firmware=== |
|||
In order to use the LinuxTV driver, you need to download and install the firmware. Here is the procedure to follow (taken from the help found in extract_xc3028.pl): |
|||
Download the windows driver with something like: |
|||
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip |
|||
Extract the file hcw85bda.sys from the zip into the current dir: |
|||
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys |
|||
run the extract_xc3028.pl script found in linux/Documentation/video4linux: |
|||
./extract_xc3028.pl |
|||
copy the generated file so it can be picked up by the Linux kernel: |
|||
cp xc3028-v27.fw /lib/firmware |
|||
===Drivers=== |
|||
Use a recent snapshot of [http://linuxtv.org/repo/ LinuxTV's v4l-dvb drivers] |
|||
* Both analog and ATSC digital reception are supported |
|||
* Read the above mentioned [[Pinnacle_PCTV_HD_Pro_Stick_(800e)#Firmware|Firmware]] section for details on installing the proper firmware. |
|||
=== Sample Kernel Output=== |
|||
Linux video capture interface: v2.00 |
|||
em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0) |
|||
em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17) |
|||
ACPI: PCI Interrupt 0000:06:01.0[A] -> <6>em28xx #0: chip ID is em2882/em2883 |
|||
em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c |
|||
em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 |
|||
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 |
|||
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 |
|||
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|||
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|||
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 |
|||
em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 |
|||
em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 |
|||
em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 |
|||
em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00 |
|||
em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 00 00 |
|||
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|||
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|||
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|||
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|||
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2de5abbf |
|||
em28xx #0: EEPROM info: |
|||
em28xx #0: AC97 audio (5 sample rates) |
|||
em28xx #0: 500mA max power |
|||
em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a |
|||
tvp5150' 0-005c: chip found @ 0xb8 (em28xx #0) |
|||
Vortex: init.... <6>tuner' 0-0061: chip found @ 0xc2 (em28xx #0) |
|||
xc2028 0-0061: creating new instance |
|||
xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner |
|||
xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 |
|||
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. |
|||
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. |
|||
xc2028 0-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. |
|||
input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/input/input6 |
|||
em28xx #0: Config register raw data: 0xd0 |
|||
em28xx #0: AC97 vendor ID = 0xffffffff |
|||
em28xx #0: AC97 features = 0x6a90 |
|||
em28xx #0: Empia 202 AC97 audio processor detected |
|||
tvp5150' 0-005c: tvp5150am1 detected. |
|||
em28xx #0: v4l2 driver version 0.1.1 |
|||
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 |
|||
usbcore: registered new interface driver em28xx |
|||
em28xx driver loaded |
|||
xc2028 0-0061: attaching existing instance |
|||
xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner |
|||
em28xx #0/2: xc3028 attached |
|||
DVB: registering new adapter (em28xx #0) |
|||
DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... |
|||
Successfully loaded em28xx-dvb |
|||
Em28xx: Initialized (Em28xx dvb Extension) extension |
|||
tvp5150' 0-005c: tvp5150am1 detected. |
|||
===Remote Control Support=== |
|||
The Pinnacle PCTV HD Pro Stick ships with a remote control, for which support in the LinuxTV driver was added in hg version 9628 (November 16, 2008). |
|||
==External Links== |
==External Links== |
||
[[Category:ATSC USB Devices]] |
|||
* Pinnacle product pages: |
|||
** [http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+HD+Pro+Stick "Pro" version] |
|||
** [http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+HD+Stick.htm non "Pro" version] |
Latest revision as of 15:12, 29 July 2009
A hybrid ATSC USB 2.0 device by Pinnacle.
Support for the digital functionality of this device was added to the LinuxTV codebase on June 5, 2008 (hg 2aa420c58fc6), and is available in kernel 2.6.27 [1].
lsusb -v
is 2304:0227. Pinnacle has released a newer revision of the device with the exact same name and branding, but which is not covered by this driver. Information on that other version of the device (USB ID 2304:023a) can be found in the Pinnacle PCTV HD Pro Stick (801e) article.
Overview/Features
This device supports ATSC (i.e. OTA Digital TV) and analog NTSC. It also has a connector on the side for an A/V cable dongle. The package includes a small dipole antenna and a short USB extension cable, as well as a remote control.
Card connectors/inputs:
- TV antenna input(F-connector)
- A/V adaptor, providing:
- S-Video
- Composite Video (RCA)
- Stereo audio(3.5mm plug)
- IR-Remote Sensor
The device is functionally identical to the Hauppauge WinTV-HVR-950 and Elgato EyeTV Hybrid US.
Components used
- Xceive xc3028ACQ (tuner & analog demodulator)
- LG DT3303 (digital demodulator)
- Texas Instruments tvp5150 (video decoder)
- Empiatech em2883 (USB bridge and analog audio)
Other Images
Identification
lsusb -v Bus 007 Device 020: ID 2304:0227 Pinnacle Systems, Inc. [hex] PCTV for Mac, HD Stick Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2304 Pinnacle Systems, Inc. [hex] idProduct 0x0227 PCTV for Mac, HD Stick bcdDevice 1.10 iManufacturer 3 Pinnacle Systems iProduct 1 PCTV 800e iSerial 2 070101017994 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 305 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0234 1x 564 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 2 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0ad4 2x 724 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0234 1x 564 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 3 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0c00 2x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0234 1x 564 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 4 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1300 3x 768 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0234 1x 564 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 5 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x135c 3x 860 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0234 1x 564 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 6 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x13c4 3x 964 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0234 1x 564 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 7 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 11 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1400 3x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0234 1x 564 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered)
Making it Work
Firmware
In order to use the LinuxTV driver, you need to download and install the firmware. Here is the procedure to follow (taken from the help found in extract_xc3028.pl):
Download the windows driver with something like:
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
Extract the file hcw85bda.sys from the zip into the current dir:
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
run the extract_xc3028.pl script found in linux/Documentation/video4linux:
./extract_xc3028.pl
copy the generated file so it can be picked up by the Linux kernel:
cp xc3028-v27.fw /lib/firmware
Drivers
Use a recent snapshot of LinuxTV's v4l-dvb drivers
- Both analog and ATSC digital reception are supported
- Read the above mentioned Firmware section for details on installing the proper firmware.
Sample Kernel Output
Linux video capture interface: v2.00 em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0) em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17) ACPI: PCI Interrupt 0000:06:01.0[A] -> <6>em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00 em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2de5abbf em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a tvp5150' 0-005c: chip found @ 0xb8 (em28xx #0) Vortex: init.... <6>tuner' 0-0061: chip found @ 0xc2 (em28xx #0) xc2028 0-0061: creating new instance xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/input/input6 em28xx #0: Config register raw data: 0xd0 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150' 0-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.1 em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 usbcore: registered new interface driver em28xx em28xx driver loaded xc2028 0-0061: attaching existing instance xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner em28xx #0/2: xc3028 attached DVB: registering new adapter (em28xx #0) DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... Successfully loaded em28xx-dvb Em28xx: Initialized (Em28xx dvb Extension) extension tvp5150' 0-005c: tvp5150am1 detected.
Remote Control Support
The Pinnacle PCTV HD Pro Stick ships with a remote control, for which support in the LinuxTV driver was added in hg version 9628 (November 16, 2008).