KNC1 TV-Station DVB-S: Difference between revisions
m (some org/formating) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
A [[DVB-S]] [[PCI]] card produced by [[KNC1]] based on the [[Philips SAA7146]]. |
A [[DVB-S]] [[PCI]] card produced by [[KNC1]] based on the [[Philips SAA7146]]. |
||
There are at least two different revisions of this card, and all revisions should work under Linux. |
|||
==Overview/Features== |
|||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
== Details == |
|||
The card has a CI connector (Cineview module add-on required) and it works fine on Linux! Tested CAMs: |
The card has a CI connector (Cineview module add-on required) and it works fine on Linux! Tested CAMs: |
||
| Line 24: | Line 25: | ||
|- |
|- |
||
| Xcam (X-cam) with Angel chip || Xcrypt 1.48 || Kaffeine 0.8.3 || Working fine |
| Xcam (X-cam) with Angel chip || Xcrypt 1.48 || Kaffeine 0.8.3 || Working fine |
||
| ⚫ | |||
|- |
|- |
||
| Cryptoworks || Cryptoworks V4.02.006 || Kaffeine 0.8.7 || Working fine |
| Cryptoworks || Cryptoworks V4.02.006 || Kaffeine 0.8.7 || Working fine |
||
| ⚫ | |||
| Euro-Irdeto || || Kaffeine 1.0 || Working fine |
|||
|- |
|- |
||
| Line 33: | Line 35: | ||
Note 2: The Matrix gives huge corruption and dropped frames on Windows, my Matrix CAM is tested and OK, so maybe the KNC1 hardware just isn't capable or compatible? |
Note 2: The Matrix gives huge corruption and dropped frames on Windows, my Matrix CAM is tested and OK, so maybe the KNC1 hardware just isn't capable or compatible? |
||
==Making it Work== |
|||
===Drivers=== |
|||
The card uses the '''budget-av''' driver in Linux. |
The card uses the '''budget-av''' driver in Linux. |
||
==External Links== |
|||
| ⚫ | |||
[[Category:DVB-S PCI Cards]] |
[[Category:DVB-S PCI Cards]] |
||
Latest revision as of 03:11, 24 June 2010
A DVB-S PCI card produced by KNC1 based on the Philips SAA7146.
There are at least two different revisions of this card, and all revisions should work under Linux.
Overview/Features
The current revision does not seem to work properly in Linux. For details see this page about it in the development section. This issue is AFAIK fixed by now and all available revisions should work.
This card is able to deliver the full MPEG-2 Transport Stream to the host.
The card has a CI connector (Cineview module add-on required) and it works fine on Linux! Tested CAMs:
| Type | HW/SW version | Application version | Results |
|---|---|---|---|
| Aston Seca2 module | HW 1.05 | Kaffeine 0.8.3 | Working fine |
| Official Canal Digitaal/TV Vlaanderen Mediaguard module | Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) | Kaffeine 0.8.3 | Working but some corruption blocks in image and corrupted sound, not really usable for watching (note 1) |
| Matrix Reborn | Standard Z-cas, not flashed | Kaffeine 0.8.3 | Does not initialize, doesn't work (note 2) |
| Xcam (X-cam) with Angel chip | Xcrypt 1.48 | Kaffeine 0.8.3 | Working fine |
| Cryptoworks | Cryptoworks V4.02.006 | Kaffeine 0.8.7 | Working fine |
| Euro-Irdeto | Kaffeine 1.0 | Working fine |
Note 1: Can probably still be used to "activate" or "reactivate" a Canal Digitaal/TV Vlaanderen seca2 card, which is something that cannot be done by e.g. the Xcam. Note 2: The Matrix gives huge corruption and dropped frames on Windows, my Matrix CAM is tested and OK, so maybe the KNC1 hardware just isn't capable or compatible?
Making it Work
Drivers
The card uses the budget-av driver in Linux.