Hauppauge WinTV-HVR-900: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (Added category: DVB-T USB Devices)
No edit summary
 
(5 intermediate revisions by 4 users not shown)
Line 1: Line 1:
A [[Universal Serial Bus|USB 2.0]] [[DVB-T]] device by [[Hauppauge]].
A [[Universal Serial Bus|USB 2.0]] [[DVB-T]] device by [[Hauppauge]].


==== New Documentation ====
==== Other Information ====


Apparently two versions are sold under the HVR-900 name: models 65008 (USB ID 2040:6500) and 65018 (USB ID 2040:6502). There is also a model 66009/A6F1, which is the [[Hauppauge_WinTV-HVR-900H|HVR-900H]].
Installation and Using Guides can be found at mcentral.de [http://mcentral.de/wiki/index.php5/Main_Page (mcentral.de)]

==== Other Information ====


⚫
Analog is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following [[Xceive XC3028/XC2028|these instructions]].
Apparently two versions are sold under the HVR-900 name: models 65008 & 65018.
See also [[Hauppauge_WinTV-HVR-900H|HVR-900H]].


DVB-T is supported in mainline for model 65008, and in some [http://www.kernellabs.com/blog/?p=1397 newly-released drivers] for the 65018.
⚫
Currently, analog (but not DVB-T) is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following [[Xceive XC3028/XC2028|these instructions]].
Experimental out of tree support for DVB-T also exists; see [http://mcentral.de/wiki/index.php/Em2880 here].


Based on:
Based on:
* Empiatech Em2880 usb bridge
* Empiatech Em2880 usb bridge
* Xceive [[Xceive XC3028|XC3028]] tuner and analog IF demodulator
* Xceive [[Xceive XC3028|XC3028]] tuner and analog IF demodulator
* Zarlink DVB-T demodulator (in original version) or Micronas drx397x DVB-T demodulator (newer versions)
* Zarlink DVB-T demodulator (in original model 65008) or Micronas drx397x DVB-T demodulator (newer model 65018)
[[Category:DVB-T USB Devices]]
[[Category:DVB-T USB Devices]]

Latest revision as of 07:36, 24 July 2010

A USB 2.0 DVB-T device by Hauppauge.

Other Information

Apparently two versions are sold under the HVR-900 name: models 65008 (USB ID 2040:6500) and 65018 (USB ID 2040:6502). There is also a model 66009/A6F1, which is the HVR-900H.

Analog is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following these instructions.

DVB-T is supported in mainline for model 65008, and in some newly-released drivers for the 65018.

Based on:

  • Empiatech Em2880 usb bridge
  • Xceive XC3028 tuner and analog IF demodulator
  • Zarlink DVB-T demodulator (in original model 65008) or Micronas drx397x DVB-T demodulator (newer model 65018)
Retrieved from "https://www.linuxtv.org/wiki/index.php?title=Hauppauge_WinTV-HVR-900&oldid=27565"