Wiki - New Device Copy & Paste Template: Difference between revisions
m (minor descriptional fix) |
|||
(21 intermediate revisions by 2 users not shown) | |||
Line 2: | Line 2: | ||
Usage: |
Usage: |
||
* Once you have logged in |
* Once you have logged in to the wiki, open another browser tab or window and, in which, start creating a new device article |
||
* |
* Next, return to this article and click the "view source" tab at the top of the page. Then, copy the entire contents from the box displaying this page's wiki source code |
||
* |
* Then switch back to the new device page you are creating and, within the editing box at the bottom of it's page, paste the entire page code contents that you've just copied from the "New Device Copy & Paste Template" article |
||
* Proceed to |
* Proceed then to edit your new device article page by filling in the various sections, replacing the template examples, with information relevant for the new device you are adding to the wiki. Be sure to delete ''<font color<nowiki>=</nowiki>"#009000">the green italic directional comment sections</font>'' provided by the template (as well as this notice)}} <br> |
||
''First, if possible, we would like a good overall image of what the device looks like (Note: do NOT use proprietary images unless you have obtained permission to do so). |
<span style="color:#009000"> ''First, if possible, we would like a good overall image of what the device looks like (Note: do NOT use proprietary images unless you have obtained permission to do so). <br> |
||
''Next, provide a brief summary of what the device is and by whom it is provided (include wiki links to the card type and the vendor -- and, ideally, after you have finished editing this page, you should add links from those pages back to this one).'' <br> |
|||
''The last introductory piece of information is the all important indication of whether or not the device is supported under Linux. Here's an example:''</span><br> |
|||
[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]] |
[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]] |
||
An [[ATSC]] [[ATSC PCI |
An [[ATSC]] [[ATSC PCI Cards|PCI Card]] from [[KWorld]]. |
||
The ATSC 115 is supported under Linux since kernel 2.6.24. |
The ATSC 115 is supported under Linux since kernel 2.6.24. |
||
''Note: The page contents menu will automagically build itself, so you need not worry about it'' |
<span style="color:#009000">''Note: The page contents menu will automagically build itself, so you need not worry about it''</span> |
||
==Overview/Features== |
==Overview/Features== |
||
''Discuss the features and facets of the device here. For example:''<br> |
<span style="color:#009000">''Discuss the features and facets of the device here. For example:''</span><br> |
||
* PCI interface |
* PCI interface |
||
* Inputs: Antenna (Composite), Remote and S-Video In |
* Inputs: Antenna (Composite), Remote and S-Video In |
||
===Components Used=== |
===Components Used=== |
||
''List the hardware ICs |
<span style="color:#009000">''List the hardware ICs used by the device here. For example:''</span><br> |
||
* [[ |
* [[Quantek QT1010]] (tuner) |
||
* [[Zarlink MT352|Intel/Zarlink MT352]] (demodulator) |
|||
It is a small USB TV stick offering only a digital (not analog) TV tuner. |
|||
* [[Philips SAA7134|NXP/Philips SAA7130HL]] (A/V decoder and PCI Interface) |
|||
Most probably it is a rebranded REALTEK 2832U Device |
|||
===Other Images=== |
===Other Images=== |
||
''Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:''<br> |
<span style="color:#009000">''Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:''</span><br> |
||
<gallery perrow=5> |
<gallery perrow=5> |
||
Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box |
Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box |
||
Line 37: | Line 39: | ||
===Identification=== |
===Identification=== |
||
''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:''<br> |
<span style="color:#009000">''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:''</span><br> |
||
# lspci -vvvnn |
# lspci -vvvnn |
||
04:03.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) |
04:03.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) |
||
Line 50: | Line 52: | ||
Status: D0 PME-Enable- DSel=0 DScale=1 PME- |
Status: D0 PME-Enable- DSel=0 DScale=1 PME- |
||
==Making it Work== |
|||
Please understand that I am new to LINUX. |
|||
<span style="color:#009000">''Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''</span> |
|||
I am looking for a driver for a USB TV card, a rebranded one, by the name crypto "ReDi PC 50 A" |
|||
My netbook is dual boot and also runs windows 7 (32bit) which reports the card as REALTEK according to the info below |
|||
Field Value |
|||
Device Properties |
|||
Driver Description DVB-T TV Stick |
|||
Driver Date 28/1/2010 |
|||
Driver Version 86.1.128.2010 |
|||
Driver Provider REALTEK |
|||
INF File oem5.inf |
|||
Hardware ID USB\VID_1F4D&PID_A803&REV_0100&MI_00 |
|||
Location Information 0000.001d.0007.003.000.000.000.000.000 |
|||
------------------- |
|||
Having looked up the above hardware ID I came acroos a web page describing the card as a rebranded REALTEK 2832U Device |
|||
Perhaps I am wrong, perhaps I did not understand it well. |
|||
== |
===Firmware=== |
||
<span style="color:#009000">''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''</span> |
|||
http://www.cryptoelectronics.gr/ |
|||
http://www.cryptoelectronics.gr/catalog/partdetail.aspx?partno=W002289 |
|||
(The vendor's web site is down quite often) |
|||
===Drivers=== |
|||
<span style="color:#009000">''Discuss the kernel driver modules used by the device here. Provide the details of where the drivers, any patches, and any other necessary tools are available.''</span> |
|||
===Sample Kernel Output=== |
|||
<span style="color:#009000">''Provide the '''relevant''' portion of dmesg here. For example:''</span><br> |
|||
# dmesg |
|||
[ 45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded |
|||
[ 45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000 |
|||
[ 45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected] |
|||
[ 45.569753] saa7130[0]: board init: gpio is 843f00 |
|||
[ 45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7 |
|||
[ 45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 |
|||
[ 45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff |
|||
[ 45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff |
|||
[ 45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
|||
[ 45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff |
|||
[ 45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb |
|||
[ 45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
|||
[ 45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
|||
[ 45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom |
|||
[ 45.755532] saa7130[0]: registered device video0 [v4l2] |
|||
[ 45.755550] saa7130[0]: registered device vbi0 |
|||
[ 45.873425] saa7134 ALSA driver for DMA sound loaded |
|||
[ 45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2 |
|||
[ 45.943354] saa7130[0]/dvb: frontend initialization failed |
|||
===Remote Control Support=== |
|||
''Finally, add anything else that you think might be relevant under an appropriate heading.'' |
|||
<span style="color:#009000">''Discuss support for the remote control here.''</span> |
|||
===An Appropriate Title=== |
|||
adminx11@ubuntu:~$ lspci -vvvnn |
|||
<span style="color:#009000">''If deemed necessary, create an additional heading (using an appropriate title) and add anything else that you think might be relevant''</span> |
|||
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: agpgart-intel |
|||
==External Links== |
|||
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller]) |
|||
<span style="color:#009000">''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:''</span><br> |
|||
Subsystem: Device [1b50:5602] |
|||
* [http://www.comprousa.com/en/product/t100t220/t220.html Compro T-220 product page] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin A routed to IRQ 16 |
|||
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=512K] |
|||
Region 1: I/O ports at 1800 [size=8] |
|||
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] |
|||
Region 3: Memory at d0300000 (32-bit, non-prefetchable) [size=256K] |
|||
Expansion ROM at <unassigned> [disabled] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: i915 |
|||
Kernel modules: intelfb, i915 |
|||
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Region 0: Memory at d0280000 (32-bit, non-prefetchable) [size=512K] |
|||
Capabilities: <access denied> |
|||
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 44 |
|||
Region 0: Memory at d0540000 (64-bit, non-prefetchable) [size=16K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: snd_hda_intel |
|||
Kernel modules: snd-hda-intel |
|||
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 |
|||
I/O behind bridge: 00004000-00004fff |
|||
Memory behind bridge: 80700000-808fffff |
|||
Prefetchable memory behind bridge: 0000000080900000-0000000080afffff |
|||
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: pcieport |
|||
Kernel modules: shpchp |
|||
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 |
|||
I/O behind bridge: 00002000-00002fff |
|||
Memory behind bridge: d0100000-d01fffff |
|||
Prefetchable memory behind bridge: 0000000080500000-00000000806fffff |
|||
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: pcieport |
|||
Kernel modules: shpchp |
|||
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 |
|||
I/O behind bridge: 00003000-00003fff |
|||
Memory behind bridge: 80000000-804fffff |
|||
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff |
|||
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: pcieport |
|||
Kernel modules: shpchp |
|||
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin A routed to IRQ 23 |
|||
Region 4: I/O ports at 1820 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin B routed to IRQ 19 |
|||
Region 4: I/O ports at 1840 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin C routed to IRQ 18 |
|||
Region 4: I/O ports at 1860 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin D routed to IRQ 16 |
|||
Region 4: I/O ports at 1880 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin A routed to IRQ 23 |
|||
Region 0: Memory at d0544000 (32-bit, non-prefetchable) [size=1K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: ehci_hcd |
|||
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 |
|||
I/O behind bridge: 0000f000-00000fff |
|||
Memory behind bridge: fff00000-000fffff |
|||
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff |
|||
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Capabilities: <access denied> |
|||
Kernel modules: leds-ss4200, iTCO_wdt, intel-rng |
|||
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ |
|||
Latency: 0 |
|||
Interrupt: pin B routed to IRQ 19 |
|||
Region 0: I/O ports at 01f0 [size=8] |
|||
Region 1: I/O ports at 03f4 [size=1] |
|||
Region 2: I/O ports at 0170 [size=8] |
|||
Region 3: I/O ports at 0374 [size=1] |
|||
Region 4: I/O ports at 1810 [size=16] |
|||
Kernel driver in use: ata_piix |
|||
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin B routed to IRQ 19 |
|||
Region 0: I/O ports at 18d0 [size=8] |
|||
Region 1: I/O ports at 18c4 [size=4] |
|||
Region 2: I/O ports at 18c8 [size=8] |
|||
Region 3: I/O ports at 18c0 [size=4] |
|||
Region 4: I/O ports at 18b0 [size=16] |
|||
Region 5: Memory at d0544400 (32-bit, non-prefetchable) [size=1K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: ata_piix |
|||
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Interrupt: pin B routed to IRQ 10 |
|||
Region 4: I/O ports at 18e0 [size=32] |
|||
Kernel modules: i2c-i801 |
|||
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199] (rev 22) |
|||
Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 17 |
|||
Region 0: I/O ports at 2000 [size=256] |
|||
Region 1: Memory at d0100000 (32-bit, non-prefetchable) [size=16K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: r8180 |
|||
Kernel modules: r8187se |
|||
<span style="color:#009000">''Finally, the very last thing is to add a category. (Remove the nowiki tags). For example''</span><br> |
|||
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) |
|||
<nowiki>[[Category:DVB-T PCI Devices]]</nowiki> |
|||
Subsystem: Device [1b50:4605] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 43 |
|||
Region 0: I/O ports at 3000 [size=256] |
|||
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] |
|||
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] |
|||
[virtual] Expansion ROM at d0020000 [disabled] [size=128K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: r8169 |
|||
Kernel modules: r8169 |
Latest revision as of 21:02, 14 August 2012
Usage:
- Once you have logged in to the wiki, open another browser tab or window and, in which, start creating a new device article
- Next, return to this article and click the "view source" tab at the top of the page. Then, copy the entire contents from the box displaying this page's wiki source code
- Then switch back to the new device page you are creating and, within the editing box at the bottom of it's page, paste the entire page code contents that you've just copied from the "New Device Copy & Paste Template" article
- Proceed then to edit your new device article page by filling in the various sections, replacing the template examples, with information relevant for the new device you are adding to the wiki. Be sure to delete the green italic directional comment sections provided by the template (as well as this notice)
First, if possible, we would like a good overall image of what the device looks like (Note: do NOT use proprietary images unless you have obtained permission to do so).
Next, provide a brief summary of what the device is and by whom it is provided (include wiki links to the card type and the vendor -- and, ideally, after you have finished editing this page, you should add links from those pages back to this one).
The last introductory piece of information is the all important indication of whether or not the device is supported under Linux. Here's an example:
The ATSC 115 is supported under Linux since kernel 2.6.24.
Note: The page contents menu will automagically build itself, so you need not worry about it
Overview/Features
Discuss the features and facets of the device here. For example:
- PCI interface
- Inputs: Antenna (Composite), Remote and S-Video In
Components Used
List the hardware ICs used by the device here. For example:
- Quantek QT1010 (tuner)
- Intel/Zarlink MT352 (demodulator)
- NXP/Philips SAA7130HL (A/V decoder and PCI Interface)
Other Images
Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:
Identification
Provide here, for PCI/PCIe devices, the relevant output of lspci -vnn
or, in the case of USB devices, lsusb -v
. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:
# lspci -vvvnn 04:03.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) Subsystem: Compro Technology, Inc. Videomate DVB-T200 [185b:c901] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 84 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Making it Work
Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)
Firmware
Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.
Drivers
Discuss the kernel driver modules used by the device here. Provide the details of where the drivers, any patches, and any other necessary tools are available.
Sample Kernel Output
Provide the relevant portion of dmesg here. For example:
# dmesg [ 45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded [ 45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000 [ 45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected] [ 45.569753] saa7130[0]: board init: gpio is 843f00 [ 45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7 [ 45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff [ 45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff [ 45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom [ 45.755532] saa7130[0]: registered device video0 [v4l2] [ 45.755550] saa7130[0]: registered device vbi0 [ 45.873425] saa7134 ALSA driver for DMA sound loaded [ 45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2 [ 45.943354] saa7130[0]/dvb: frontend initialization failed
Remote Control Support
Discuss support for the remote control here.
An Appropriate Title
If deemed necessary, create an additional heading (using an appropriate title) and add anything else that you think might be relevant
External Links
Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:
Finally, the very last thing is to add a category. (Remove the nowiki tags). For example
[[Category:DVB-T PCI Devices]]