DViCO FusionHDTV II

This card is presently unsupported. However, there is a good chance that it can be made to work. See the following mailing list thread for some further detail: http://www.linuxtv.org/pipermail/linux-dvb/2006-May/010072.html

Those wishing to enable support should inquire on the mailing list.

---

When I physically inspect this card, I see

• a big label that says "DViCO FusionHDTV II" on the metal tuner box
• the PCI interface chip "conexant Fusion 878A"
• another chip labeled "oren OR51211".

$ sudo lspci -v
...
02:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Subsystem: DViCO Corporation Unknown device d210
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at f6fff000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

02:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Subsystem: DViCO Corporation Unknown device d210
        Flags: medium devsel, IRQ 11
        Memory at f6ffe000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

$ sudo lspci -vn
02:0b.0 0400: 109e:036e (rev 11)
        Subsystem: 18ac:d210
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at f6fff000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

02:0b.1 0480: 109e:0878 (rev 11)
        Subsystem: 18ac:d210
        Flags: medium devsel, IRQ 11
        Memory at f6ffe000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

I have not yet gotten this card to work in a Linux box. --DavidCary 01:09, 21 November 2006 (CET)