Dreambox: Difference between revisions
(expand from stub) |
mNo edit summary |
||
| Line 2: | Line 2: | ||
These are based around an 250MHz IBM PowerPC processor with built-in MPEG2 hardware decode capability and typically will run Enigma as the default user interface. |
These are based around an 250MHz IBM PowerPC processor with built-in MPEG2 hardware decode capability and typically will run Enigma as the default user interface. |
||
Installed tuners vary between models, with [[DVB-S]] and terrestrial versions available. |
|||
Most (but not all) models connect to wired-LAN, allowing programmes to be recorded to network-attached storage or transferred as VLC streaming video. A few higher-end models, such as the 600's and the 7000-series, add the ability to add internal hard discs or other storage media. |
Most (but not all) models connect to wired-LAN, allowing programmes to be recorded to network-attached storage or transferred as VLC streaming video. A few higher-end models, such as the 600's and the 7000-series, add the ability to add internal hard discs or other storage media. |
||
Latest revision as of 05:36, 26 November 2007
A series of Linux-based SetTopBoxes produced by Dream-Multimedia-TV GmbH.
These are based around an 250MHz IBM PowerPC processor with built-in MPEG2 hardware decode capability and typically will run Enigma as the default user interface.
Installed tuners vary between models, with DVB-S and terrestrial versions available.
Most (but not all) models connect to wired-LAN, allowing programmes to be recorded to network-attached storage or transferred as VLC streaming video. A few higher-end models, such as the 600's and the 7000-series, add the ability to add internal hard discs or other storage media.
Most software in these units is open-source, with the exception of the low-level dream.o hardware driver. IBM is unwilling to publicly release a full specification for the embedded processor, so any individual hardware device drivers sadly remain closed-source.