Hauppauge WinTV-HVR-900: Difference between revisions
Jump to navigation
Jump to search
TuxCrafter (talk | contribs) No edit summary |
m (added link to HVR-900H) |
||
| Line 8: | Line 8: | ||
Apparently two versions are sold under the HVR-900 name: models 65008 & 65018. |
Apparently two versions are sold under the HVR-900 name: models 65008 & 65018. |
||
See also [[Hauppauge_WinTV-HVR-900H|HVR-900H]]. |
|||
Currently, analog (but not DVB-T) is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following [[Xceive XC3028/XC2028|these instructions]]. |
Currently, analog (but not DVB-T) is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following [[Xceive XC3028/XC2028|these instructions]]. |
||
Revision as of 20:19, 23 June 2008
A USB 2.0 DVB-T device by Hauppauge.
New Documentation
Installation and Using Guides can be found at mcentral.de (mcentral.de)
Other Information
Apparently two versions are sold under the HVR-900 name: models 65008 & 65018. See also HVR-900H.
Currently, analog (but not DVB-T) is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following these instructions. Experimental out of tree support for DVB-T also exists; see here.
Based on:
- Empiatech Em2880 usb bridge
- Xceive XC3028 tuner and analog IF demodulator
- Zarlink DVB-T demodulator (in original version) or Micronas drx397x DVB-T demodulator (newer versions)