Hauppauge DEC2000-T USB: Difference between revisions
Jump to navigation
Jump to search
(Formatting. Notes on CAM/TUTV.) |
No edit summary |
||
| Line 5: | Line 5: | ||
The device is USB 1.1. |
The device is USB 1.1. |
||
It will not work with VDR as it does not have a hardware MPEG2 decoder. |
It will not work with VDR as a primary device because it does not have a hardware MPEG2 decoder. |
||
It can be used with softdevice, streaming or xine or as secondary device. |
|||
I have not been able to find a [[CAM]] for [[Top-up TV]] in the UK despite Hauppauge providing them for other models. There is space for a CAM in the version of the hardware supplied with the 1.26 firmware. |
I have not been able to find a [[CAM]] for [[Top-up TV]] in the UK despite Hauppauge providing them for other models. There is space for a CAM in the version of the hardware supplied with the 1.26 firmware. |
||
Revision as of 09:38, 21 May 2005
A DVB-T device from hauppauge that can get used both as PC peripheral and as standalone STB. Based on the AV711x MPEG Decoder and the TDA10045 Demodulator.
Linux driver exists, Audio and Video work. Section tables too?
The device is USB 1.1.
It will not work with VDR as a primary device because it does not have a hardware MPEG2 decoder. It can be used with softdevice, streaming or xine or as secondary device.
I have not been able to find a CAM for Top-up TV in the UK despite Hauppauge providing them for other models. There is space for a CAM in the version of the hardware supplied with the 1.26 firmware.
Under Debian
- Follow the instructions in /usr/src/kernel-source-2.6.8/Documentation/dvb/.
- Use v1.26 of the firmware. Look on archive.org and use zip -F after download if necessary. The most recent version (1.28a?) did not work for me.
- Install dvb-utils
- Playback and channel changing (via the playlist) is possible with gxine.
- Set up the channels with
scan -o zap /usr/share/doc/dvb-utils/examples/scan/<country>-<region> > ~/.xine/channels.conf
- I've had problems with the picture not displaying, but that could be a driver problem.
- You can record programs with
tzap "Channel id" -r & cat /dev/dvb/adapter0/dvr0 > "Programme.mpeg" &