Wiki - New Device Copy & Paste Template: Difference between revisions
Line 370: | Line 370: | ||
''Finally, add anything else that you think might be relevant under an appropriate heading.'' |
''Finally, add anything else that you think might be relevant under an appropriate heading.'' |
||
adminx11@ubuntu:~$ lspci -vvvnn |
|||
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: agpgart-intel |
|||
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin A routed to IRQ 16 |
|||
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=512K] |
|||
Region 1: I/O ports at 1800 [size=8] |
|||
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] |
|||
Region 3: Memory at d0300000 (32-bit, non-prefetchable) [size=256K] |
|||
Expansion ROM at <unassigned> [disabled] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: i915 |
|||
Kernel modules: intelfb, i915 |
|||
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Region 0: Memory at d0280000 (32-bit, non-prefetchable) [size=512K] |
|||
Capabilities: <access denied> |
|||
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 44 |
|||
Region 0: Memory at d0540000 (64-bit, non-prefetchable) [size=16K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: snd_hda_intel |
|||
Kernel modules: snd-hda-intel |
|||
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 |
|||
I/O behind bridge: 00004000-00004fff |
|||
Memory behind bridge: 80700000-808fffff |
|||
Prefetchable memory behind bridge: 0000000080900000-0000000080afffff |
|||
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: pcieport |
|||
Kernel modules: shpchp |
|||
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 |
|||
I/O behind bridge: 00002000-00002fff |
|||
Memory behind bridge: d0100000-d01fffff |
|||
Prefetchable memory behind bridge: 0000000080500000-00000000806fffff |
|||
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: pcieport |
|||
Kernel modules: shpchp |
|||
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 |
|||
I/O behind bridge: 00003000-00003fff |
|||
Memory behind bridge: 80000000-804fffff |
|||
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff |
|||
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: pcieport |
|||
Kernel modules: shpchp |
|||
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin A routed to IRQ 23 |
|||
Region 4: I/O ports at 1820 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin B routed to IRQ 19 |
|||
Region 4: I/O ports at 1840 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin C routed to IRQ 18 |
|||
Region 4: I/O ports at 1860 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin D routed to IRQ 16 |
|||
Region 4: I/O ports at 1880 [size=32] |
|||
Kernel driver in use: uhci_hcd |
|||
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin A routed to IRQ 23 |
|||
Region 0: Memory at d0544000 (32-bit, non-prefetchable) [size=1K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: ehci_hcd |
|||
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 |
|||
I/O behind bridge: 0000f000-00000fff |
|||
Memory behind bridge: fff00000-000fffff |
|||
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff |
|||
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- |
|||
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- |
|||
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- |
|||
Capabilities: <access denied> |
|||
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Capabilities: <access denied> |
|||
Kernel modules: leds-ss4200, iTCO_wdt, intel-rng |
|||
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ |
|||
Latency: 0 |
|||
Interrupt: pin B routed to IRQ 19 |
|||
Region 0: I/O ports at 01f0 [size=8] |
|||
Region 1: I/O ports at 03f4 [size=1] |
|||
Region 2: I/O ports at 0170 [size=8] |
|||
Region 3: I/O ports at 0374 [size=1] |
|||
Region 4: I/O ports at 1810 [size=16] |
|||
Kernel driver in use: ata_piix |
|||
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0 |
|||
Interrupt: pin B routed to IRQ 19 |
|||
Region 0: I/O ports at 18d0 [size=8] |
|||
Region 1: I/O ports at 18c4 [size=4] |
|||
Region 2: I/O ports at 18c8 [size=8] |
|||
Region 3: I/O ports at 18c0 [size=4] |
|||
Region 4: I/O ports at 18b0 [size=16] |
|||
Region 5: Memory at d0544400 (32-bit, non-prefetchable) [size=1K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: ata_piix |
|||
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) |
|||
Subsystem: Device [1b50:5602] |
|||
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Interrupt: pin B routed to IRQ 10 |
|||
Region 4: I/O ports at 18e0 [size=32] |
|||
Kernel modules: i2c-i801 |
|||
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199] (rev 22) |
|||
Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 17 |
|||
Region 0: I/O ports at 2000 [size=256] |
|||
Region 1: Memory at d0100000 (32-bit, non-prefetchable) [size=16K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: r8180 |
|||
Kernel modules: r8187se |
|||
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) |
|||
Subsystem: Device [1b50:4605] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 43 |
|||
Region 0: I/O ports at 3000 [size=256] |
|||
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] |
|||
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] |
|||
[virtual] Expansion ROM at d0020000 [disabled] [size=128K] |
|||
Capabilities: <access denied> |
|||
Kernel driver in use: r8169 |
|||
Kernel modules: r8169 |
Revision as of 22:30, 12 August 2012
Usage:
- Once you have logged in, simply click the edit tab at the top of this page
- Then from within the editing box at the bottom of the editing page, copy the entire contents of this article
- From within the editing box at the bottom of the new device page you are creating, paste the copied content from the "new device copy and paste template"
- Proceed to fill in the information relevant for the device and delete the italic directional comment sections provided by the template (as well as this notice)
First, if possible, we would like a good overall image of what the device looks like (Note: do NOT use proprietary images unless you have obtained permission to do so). Next, provide a brief summary of what the device is and by whom it is provided (include wiki links to the card type and the vendor -- and, ideally, after you have finished editing this page, you should add links from those pages back to this one). The last introductory piece of information is the all important indication of whether or not the device is supported under Linux. Here's an example:
An ATSC ATSC PCI cards from KWORLD.
The ATSC 115 is supported under Linux since kernel 2.6.24.
Note: The page contents menu will automagically build itself, so you need not worry about it
Overview/Features
Discuss the features and facets of the device here. For example:
- PCI interface
- Inputs: Antenna (Composite), Remote and S-Video In
Components Used
List the hardware ICs and modules used by the device here. For example:
- [[crypto ReDi PC 50 A] (tuner)
It is a small USB TV stick offering only a digital (not analog) TV tuner. Most probably it is a rebranded REALTEK 2832U Device
Other Images
Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:
Identification
Provide here, for PCI/PCIe devices, the relevant output of lspci -vnn
or, in the case of USB devices, lsusb -v
. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:
adminx11@ubuntu:~$ lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Couldn't open device, some information will be missing Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255
Bus 001 Device 003: ID 1f4d:a803 G-Tek Electronics Group Couldn't open device, some information will be missing Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1f4d G-Tek Electronics Group idProduct 0xa803 bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 4 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface
=
Please understand that I am new to LINUX. I am looking for a driver for a USB TV card, a rebranded one, by the name crypto "ReDi PC 50 A" My netbook is dual boot and also runs windows 7 (32bit) which reports the card as REALTEK according to the info below Field Value Device Properties Driver Description DVB-T TV Stick Driver Date 28/1/2010 Driver Version 86.1.128.2010 Driver Provider REALTEK INF File oem5.inf Hardware ID USB\VID_1F4D&PID_A803&REV_0100&MI_00 Location Information 0000.001d.0007.003.000.000.000.000.000
Having looked up the above hardware ID I came acroos a web page describing the card as a rebranded REALTEK 2832U Device Perhaps I am wrong, perhaps I did not understand it well.
External Links
http://www.cryptoelectronics.gr/ http://www.cryptoelectronics.gr/catalog/partdetail.aspx?partno=W002289 (The vendor's web site is down quite often)
Finally, add anything else that you think might be relevant under an appropriate heading.