DVBSKY S960: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
DVB-S/S2 USB 2.0 box from [[DVBSKy]]. |
DVB-S/S2 USB 2.0 box from [[DVBSKy]]. |
||
This device and its clone Mystique SaTix S2 V2 USB have a single LNB F-connector port, and include a IR receiver. The box is not jet supported by the main Kernel, but copying the firmware (see below) and compiling V4L from sources given by the producer [[ |
This device and its clone Mystique SaTix S2 V2 USB have a single LNB F-connector port, and include a IR receiver. The box is not jet supported by the main Kernel, but copying the firmware (see below) and compiling V4L from sources given by the producer [[DVBSky]] suffices to make it run. The IR events are forwared not via LIRC but as xevents, but the shipped remote is not fully supported (e.g. the OK key does not produce a xevent). |
||
==Features== |
==Features== |
||
| Line 11: | Line 11: | ||
*Demodulator: 2nd generation [[Montage M88DS3103]] |
*Demodulator: 2nd generation [[Montage M88DS3103]] |
||
*USB Bridge: Cypress CY68013 |
*USB Bridge: Cypress CY68013 |
||
== USB ID == |
|||
lsusb output: |
|||
| ⚫ | |||
== Firmware and Driver== |
== Firmware and Driver== |
||
At least up to Kernel 3.7.10 the driver is not included and has to be installed manually: |
At least up to Kernel 3.7.10 the driver is not included and has to be installed manually: |
||
*See [[DVBSky]] wiki page. |
*See [[DVBSky]] wiki page. |
||
*dvb-fe-ds3103.fw |
*Firmware: dvb-fe-ds3103.fw (Download: http://www.dvbsky.net/Support.html) |
||
== Identification == |
|||
$ dmesg | grep -i dvb |
|||
[ 13.063770] usb 1-4: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state |
|||
[ 13.063808] usb 1-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer |
|||
[ 13.063818] DVB: registering new adapter (DVBSky S960/S860) |
|||
[ 13.063847] usbcore: registered new interface driver dvb_usb_dvbsky |
|||
[ 13.065088] dvbsky_usb MAC address=00:17:42:54:96:0c |
|||
[ 13.065092] usb 1-4: dvb_usb_v2: MAC address: 00:17:42:54:96:0c |
|||
[ 13.276822] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)... |
|||
[ 14.375542] usb 1-4: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)... |
|||
[ 14.405386] Registered IR keymap rc-dvbsky |
|||
[ 14.405459] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/rc/rc0/input15 |
|||
[ 14.405515] rc0: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/rc/rc0 |
|||
[ 14.405518] usb 1-4: dvb_usb_v2: schedule remote query interval to 300 msecs |
|||
[ 14.405520] usb 1-4: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected |
|||
$ lsusb | grep -i Conexant |
|||
| ⚫ | |||
== Picture == |
== Picture == |
||
Revision as of 14:42, 4 December 2013
DVB-S/S2 USB 2.0 box from DVBSKy. This device and its clone Mystique SaTix S2 V2 USB have a single LNB F-connector port, and include a IR receiver. The box is not jet supported by the main Kernel, but copying the firmware (see below) and compiling V4L from sources given by the producer DVBSky suffices to make it run. The IR events are forwared not via LIRC but as xevents, but the shipped remote is not fully supported (e.g. the OK key does not produce a xevent).
Features
- USB 2.0
- Low power
- Integrated IR receiver
Components Used
- RF: Montage M88TS2022
- Demodulator: 2nd generation Montage M88DS3103
- USB Bridge: Cypress CY68013
Firmware and Driver
At least up to Kernel 3.7.10 the driver is not included and has to be installed manually:
- See DVBSky wiki page.
- Firmware: dvb-fe-ds3103.fw (Download: http://www.dvbsky.net/Support.html)
Identification
$ dmesg | grep -i dvb
[ 13.063770] usb 1-4: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state [ 13.063808] usb 1-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 13.063818] DVB: registering new adapter (DVBSky S960/S860) [ 13.063847] usbcore: registered new interface driver dvb_usb_dvbsky [ 13.065088] dvbsky_usb MAC address=00:17:42:54:96:0c [ 13.065092] usb 1-4: dvb_usb_v2: MAC address: 00:17:42:54:96:0c [ 13.276822] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)... [ 14.375542] usb 1-4: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)... [ 14.405386] Registered IR keymap rc-dvbsky [ 14.405459] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/rc/rc0/input15 [ 14.405515] rc0: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/rc/rc0 [ 14.405518] usb 1-4: dvb_usb_v2: schedule remote query interval to 300 msecs [ 14.405520] usb 1-4: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
$ lsusb | grep -i Conexant Bus 001 Device 003: ID 0572:6831 Conexant Systems (Rockwell), Inc.
Picture
Box view
Internal view
