TechniSat SkyStar S2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 9: | Line 9: | ||
[[Category:DVB-S2 PCI Cards]] |
[[Category:DVB-S2 PCI Cards]] |
||
==Drivers== |
==Drivers== |
||
Binary driver (non-GPL) available here: http://www.technisat-daun.de/download/soft/soft_linux-driver_12-2008_6611.zip |
|||
There is a patch for the s2-liplianin driver that adds support for the SkyStar S2. Instructions (german) can be found here: http://vdr-portal.de/board/thread.php?threadid=97096#post951944 |
There is a patch for the s2-liplianin driver that adds support for the SkyStar S2. Instructions (german) can be found here: http://vdr-portal.de/board/thread.php?threadid=97096#post951944 |
||
| Line 17: | Line 16: | ||
No support for 8PSK 3/4. To support the need to replace the crystal oscillator of 45 MHz to 66,667 MHz |
No support for 8PSK 3/4. To support the need to replace the crystal oscillator of 45 MHz to 66,667 MHz |
||
[Update 2014/04/22] With the latest patch / driver everything is working fine. Also 8PSK 3/4 |
[Update 2014/04/22] With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed. |
||
The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[http://www.vdr-portal.de/index.php?page=Thread&postID=1163233#post1163233]]) |
The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[http://www.vdr-portal.de/index.php?page=Thread&postID=1163233#post1163233]]) |
||
==External Links== |
==External Links== |
||
Revision as of 09:32, 22 April 2014
A FTA PCI DVB-S2 card from TechniSat.
Components Used
- PCI Bridge: FlexCop II B
- Demodulator: CX24120-13Z
- Tuner: CX24118A
- LNB: ISL6421
Drivers
There is a patch for the s2-liplianin driver that adds support for the SkyStar S2. Instructions (german) can be found here: http://vdr-portal.de/board/thread.php?threadid=97096#post951944
The patch can be extracted from the file and applied directly to the mainline linux source. Works pretty well then.
No support for 8PSK 3/4. To support the need to replace the crystal oscillator of 45 MHz to 66,667 MHz
[Update 2014/04/22] With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed. The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[1]])