TechniSat SkyStar S2: Difference between revisions
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
* LNB: ISL6421 |
* LNB: ISL6421 |
||
[[Category:DVB-S2 PCI Cards]] |
[[Category:DVB-S2 PCI Cards]] |
||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
The patch can be extracted from the file and applied directly to the mainline linux source. Works pretty well then. |
The patch can be extracted from the file and applied directly to the mainline linux source. Works pretty well then. |
||
| Line 17: | Line 19: | ||
[Update 2014/04/22] |
[Update 2014/04/22] |
||
With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed. |
With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed. |
||
The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[http://www.vdr-portal.de/index.php?page=Thread&postID=1163233#post1163233]]) |
The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[http://www.vdr-portal.de/index.php?page=Thread&postID=1163233#post1163233]]) |
||
Revision as of 09:34, 22 April 2014
A FTA PCI DVB-S2 card from TechniSat.
Components Used
- PCI Bridge: FlexCop II B
- Demodulator: CX24120-13Z
- Tuner: CX24118A
- LNB: ISL6421
==Drivers==
There is a patch for the s2-liplianin driver that adds support for the SkyStar S2. Instructions (german) can be found here: ([[1]])
The patch can be extracted from the file and applied directly to the mainline linux source. Works pretty well then.
No support for 8PSK 3/4. To support the need to replace the crystal oscillator of 45 MHz to 66,667 MHz
[Update 2014/04/22]
With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed.
The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[2]])