DigitalNow TinyTwin DVB-T Receiver: Difference between revisions
Jump to navigation
Jump to search
Bernmeister (talk | contribs) |
Bernmeister (talk | contribs) |
||
| Line 41: | Line 41: | ||
$ ls /dev/dvb |
$ ls /dev/dvb |
||
adapter0 adapter1 adapter2 adapter3 |
adapter0 adapter1 adapter2 adapter3 |
||
== Mythbuntu 10.10 == |
|||
* Devices with USB IDs 13d3:3226 and 1b80:e402 are supported out of the box. |
|||
* When the device is inserted, Mythbuntu offers to install the firmware (installs dvb-usb-af9015.fw to /lib/firmware). Need to reboot. |
|||
* Upgrading the kernel to 2.6.37 adds the same support for the latest V3 device (USB ID 1f4D:9016) i.e. offers to install firmware |
|||
* IR Receiver (i.e. remote control) not tested. |
|||
== Ubuntu 11.04 == |
== Ubuntu 11.04 == |
||
Revision as of 03:59, 29 October 2016
Introduction
| DigitalNow TinyTwin USB Dual DVB-T Digital TV Tuner (Australia) | |
| Vendor's Website | http://www.digitalnow.com.au/product_pages/TinyTwin.html |
| Support Status | Full |
| Driver | dvb-usb-af9015, dvb-usb-it9135-02 |
| Chipset | af9015, it9135 |
There are four devices, marketed under the same name, all of which are currently supported out of the box according to DigitalNow.
| Vendor Device/Model |
Supported | ID on Interface |
Hardware | Firmware | Comment / Pictures | URL | E |
|---|---|---|---|---|---|---|---|
| DigitalNow TinyTwin DVB-T Receiver | ✔ Yes, in kernel since 2.6.28 | 13d3:3226 USB2.0 | Afatech AF9015 | dvb-usb-af9015.fw | No longer available. | 
| |
| DigitalNow TinyTwin DVB-T Receiver V2 | ✔ Yes, in kernel since 2.6.34 | 1b80:e402 USB2.0 | Afatech AF9015 | dvb-usb-af9015.fw | No longer available. |
| |
| DigitalNow TinyTwin DVB-T Receiver V3 | ✔ Yes, in kernel since 2.6.37 | 1f4D:9016 USB2.0 | Afatech AF9015 | dvb-usb-af9015.fw | No longer available. |
| |
| DigitalNow TinyTwin DVB-T Receiver V3a | ✔ Yes, in kernel since 3.15 | 048d:9006 USB2.0 | IT9135 | dvb-usb-it9135-02.fw |
|
For one tuner:
$ ls /dev/dvb adapter0 adapter1
or for two tuners:
$ ls /dev/dvb adapter0 adapter1 adapter2 adapter3
Ubuntu 11.04
- Had an issue with using a pair of these (device id 1b80:e402). Although Ubuntu installed the drivers out-of-the-box, there were two missing frontends in /dev/dvb - adapter 0,1,2,3 were present, but only adapters 0 and 2 contained frontends unless I removed and re-inserted the tinytwins while Ubuntu was running. The fix was simply to grab the latest firmware (in the table above) and copy it to /lib/firmware, and reboot.