Talk:TechniSat AirStar-HD5000-USB: Difference between revisions
(New page: Any progress on updating this driver to support the newer hardware rev? My output of lsusb -v shows the following, but the b2c2-flexcop-usb driver fails to connect to the device. Bus 0...) |
No edit summary |
||
Line 131: | Line 131: | ||
wMaxPacketSize 0x0004 1x 4 bytes |
wMaxPacketSize 0x0004 1x 4 bytes |
||
bInterval 1 |
bInterval 1 |
||
dmesg output shows, |
|||
DVB: registering new adapter (FlexCop Digital TV device). |
|||
b2c2-flexcop: reading of MAC address failed. |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
mt352_read_register: readreg error (reg=127, ret==-121) |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121) |
|||
Unknown/Unsupported NXT chip: 00 00 00 00 00 |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121) |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
stv0297_readreg: readreg error (reg == 0x80, ret == -121) |
|||
b2c2-flexcop: i2c master_xfer failed |
|||
mt312_read: ret == -121 |
|||
b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter |
|||
usbcore: registered new interface driver b2c2_flexcop_usb |
|||
usb 5-1: USB disconnect, address 2 |
Revision as of 20:34, 28 September 2007
Any progress on updating this driver to support the newer hardware rev?
My output of lsusb -v shows the following, but the b2c2-flexcop-usb driver fails to connect to the device.
Bus 005 Device 002: ID 13d0:2282
Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13d0 idProduct 0x2282 bcdDevice 1.01 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 81 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 222mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 9 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8d EP 13 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0d EP 13 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0e EP 14 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8f EP 15 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 1
dmesg output shows,
DVB: registering new adapter (FlexCop Digital TV device). b2c2-flexcop: reading of MAC address failed.
b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed mt352_read_register: readreg error (reg=127, ret==-121) b2c2-flexcop: i2c master_xfer failed nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121) Unknown/Unsupported NXT chip: 00 00 00 00 00 b2c2-flexcop: i2c master_xfer failed lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121) b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed stv0297_readreg: readreg error (reg == 0x80, ret == -121) b2c2-flexcop: i2c master_xfer failed mt312_read: ret == -121 b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter usbcore: registered new interface driver b2c2_flexcop_usb usb 5-1: USB disconnect, address 2