Zolid Hybrid TV Tuner: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{Note|In essence, this page is a "copy and paste" template which users should use when establishing a new device article within the wiki. Its intended purpose is to serve as the basis for the format/layout of device articles; thereby striving to establish a general consistency throughout the wiki.

Usage:
* Once you have logged in, simply click the edit tab at the top of this page
* Then from within the editing box at the bottom of the editing page, copy the entire contents of this article
* From within the editing box at the bottom of the new device page you are creating, paste the copied content from the "new device copy and paste template"
* Proceed to fill in the information relevant for the device and delete the italic directional comment sections provided by the template (as well as this notice)}}

''First, if possible, we would like a good overall image of what the device looks like (Note: do NOT use proprietary images unless you have obtained permission to do so). Next, provide a brief summary of what the device is and by whom it is provided (include wiki links to the card type and the vendor -- and, ideally, after you have finished editing this page, you should add links from those pages back to this one). The last introductory piece of information is the all important indication of whether or not the device is supported under Linux. Here's an example:''<br />

[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]]
[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]]


A [[Hybrid TV Tuner|PCI card]] from [[Zolid]].
A Hybrid TV Tuner from [[Zolid]].


The Hybrid TV Tuner is not supported by Linux.
The Hybrid TV Tuner is not supported by Linux.


''Note: The page contents menu will automagically build itself, so you need not worry about it''


==Overview/Features==
==Overview/Features==
* Built-in IR transmitter
''Discuss the features and facets of the device here. For example:''<br>
* PCI interface

* PCI Interface
* Hybrid tuner, both DVB and Analog TV are supported
* Hybrid tuner, both DVB and Analog TV are supported


===Components Used===
===Components Used===
''List the hardware ICs and modules used by the device here. For example:''<br>
* NXP TDA18271 (tuner)
* NXP TDA18271 (tuner)
* NXP TDA10048 (demodulator)
* NXP TDA10048 (demodulator)
Line 30: Line 17:


===Other Images===
===Other Images===
''Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:''<br>
<gallery perrow=5>
<gallery perrow=5>
Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box
Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box
Line 37: Line 23:


===Identification===
===Identification===
''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:''<br>
lspci -vvvnnxxx
lspci -vvvnnxxx
04:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
04:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Line 70: Line 55:


==Making it Work==
==Making it Work==
''Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''
It is not supported by Linux. The subsystem has two matches, both reference boards: Philips TOUGH DVB-T reference design and Philips EUROPA V3 reference design. This can be found in CARDLIST.saa7134.
It is not supported by Linux. The subsystem has two matches, both reference boards: Philips TOUGH DVB-T reference design and Philips EUROPA V3 reference design. This can be found in CARDLIST.saa7134.


Line 76: Line 60:


===Firmware===
===Firmware===
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''
The card needs firmware for the TDA10048.
The card needs firmware for the TDA10048.


===Drivers===
===Drivers===
The card uses the built-in V4L saa7134 driver.
''Provide the details of where the drivers and patches and necessary tools are available.''
The card uses the built-in V4L drivers.


===Sample Kernel Output===
===Sample Kernel Output===
''Provide the '''relevant''' portion of dmesg here. For example:''<br>
dmesg
dmesg
2009-05-31 20:42:51 sander-desktop kernel [ 4169.257239] saa7134 ALSA driver for DMA sound unloaded
2009-05-31 20:42:51 sander-desktop kernel [ 4169.257239] saa7134 ALSA driver for DMA sound unloaded
Line 114: Line 95:


===Remote Control Support===
===Remote Control Support===
The default card configuration doesn't detected the built-in IR transmitter.
''Discuss support for the remote control here.''
I haven't tested this yet.


==External Links==
==External Links==
The vender Zolid doesn't have a website, so there isn't much information available about this card.
''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:''<br>

The vender Zolid doesn't have a website.

''Finally, add anything else that you think might be relevant under an appropriate heading.''


[[Category:DVB-T PCI Devices]]
''Very last thing is add a catergory. (Remove the nowiki tags). For example''<br>
<nowiki>[[Category:DVB-T PCI Devices]]</nowiki>

Revision as of 18:55, 31 May 2009

Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description

A Hybrid TV Tuner from Zolid.

The Hybrid TV Tuner is not supported by Linux.


Overview/Features

  • Built-in IR transmitter
  • PCI interface
  • Hybrid tuner, both DVB and Analog TV are supported

Components Used

  • NXP TDA18271 (tuner)
  • NXP TDA10048 (demodulator)
  • NXP/Philips SAA7131 (A/V decoder and PCI Interface)

Other Images

Identification

lspci -vvvnnxxx

 04:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
       Subsystem: Philips Semiconductors Device [1131:2004]
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 32 (21000ns min, 8000ns max)
       Interrupt: pin A routed to IRQ 17
       Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=2K]
       Capabilities: [40] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=1 PME-
       Kernel driver in use: saa7134
       Kernel modules: saa7134
 00: 31 11 33 71 06 00 90 02 d1 00 80 04 00 20 00 00
 10: 00 e0 cf fd 00 00 00 00 00 00 00 00 00 00 00 00
 20: 00 00 00 00 00 00 00 00 00 00 00 00 31 11 04 20
 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 54 20
 40: 01 00 02 06 00 20 00 1c 00 00 00 00 00 00 00 00
 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Making it Work

It is not supported by Linux. The subsystem has two matches, both reference boards: Philips TOUGH DVB-T reference design and Philips EUROPA V3 reference design. This can be found in CARDLIST.saa7134.

When loading the saa7134 module with the card parameter 156 (Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid) with firmware installed (see below), the card seems to work, but fails when scanning DVB channels.

Firmware

The card needs firmware for the TDA10048.

Drivers

The card uses the built-in V4L saa7134 driver.

Sample Kernel Output

dmesg

2009-05-31 20:42:51	sander-desktop	kernel	[ 4169.257239] saa7134 ALSA driver for DMA sound unloaded
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.629232] saa7130/34: v4l2 driver version 0.2.15 loaded
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.629291] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17, latency: 32, mmio: 0xfdcfe000
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.629297] saa7133[0]: subsystem: 1131:2004, board: UNKNOWN/GENERIC [card=0,autodetected]
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.629548] saa7133[0]: board init: gpio is 4400100
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792034] saa7133[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792044] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792051] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b2 ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792057] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792064] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 03 32 21 05 ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792070] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792076] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792083] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792089] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792095] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792102] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792108] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792114] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792120] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792127] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792133] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792610] saa7133[0]: registered device video0 [v4l2]
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.792631] saa7133[0]: registered device vbi0
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.800153] saa7134 ALSA driver for DMA sound loaded
2009-05-31 20:42:59	sander-desktop	kernel	[ 4177.800183] saa7133[0]/alsa: saa7133[0] at 0xfdcfe000 irq 17 registered as card -2


Remote Control Support

The default card configuration doesn't detected the built-in IR transmitter.

External Links

The vender Zolid doesn't have a website, so there isn't much information available about this card.