Hauppauge WinTV-HVR-900: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
==== Other Information ==== |
==== Other Information ==== |
||
Apparently two versions are sold under the HVR-900 name: models 65008 |
Apparently two versions are sold under the HVR-900 name: models 65008 and 65018. |
||
See also [[Hauppauge_WinTV-HVR-900H|HVR-900H]]. |
See also [[Hauppauge_WinTV-HVR-900H|HVR-900H]]. |
||
Analog |
Analog is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following [[Xceive XC3028/XC2028|these instructions]]. |
||
DVB-T is supported only for model 65008. |
|||
Based on: |
Based on: |
||
* Empiatech Em2880 usb bridge |
* Empiatech Em2880 usb bridge |
||
* Xceive [[Xceive XC3028|XC3028]] tuner and analog IF demodulator |
* Xceive [[Xceive XC3028|XC3028]] tuner and analog IF demodulator |
||
* Zarlink DVB-T demodulator (in original |
* Zarlink DVB-T demodulator (in original model 65008) or Micronas drx397x DVB-T demodulator (newer model 65018) |
||
[[Category:DVB-T USB Devices]] |
[[Category:DVB-T USB Devices]] |
||
Revision as of 15:55, 6 August 2009
A USB 2.0 DVB-T device by Hauppauge.
Other Information
Apparently two versions are sold under the HVR-900 name: models 65008 and 65018. See also HVR-900H.
Analog is supported by LinuxTV; the firmware for the XC3028 tuner is required and can be obtained by following these instructions.
DVB-T is supported only for model 65008.
Based on:
- Empiatech Em2880 usb bridge
- Xceive XC3028 tuner and analog IF demodulator
- Zarlink DVB-T demodulator (in original model 65008) or Micronas drx397x DVB-T demodulator (newer model 65018)