Talk:Pinnacle PCTV Pro: Difference between revisions
Jump to navigation
Jump to search
m (8 revision(s)) |
(add some user comments (Wakiki and Liontooths) from June 2007; minor formating) |
||
| Line 1: | Line 1: | ||
Sample sox command |
==Sample sox command== |
||
sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp2 -t ossdsp -w -r 32000 /dev/dsp & |
sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp2 -t ossdsp -w -r 32000 /dev/dsp & |
||
| Line 16: | Line 16: | ||
See also [[AVerMedia TVCapture 98]] which is another card based on the same chip. (note: <-- that statement is not necessarily true. only the later Pinnacle devices are similar, the earlier ones and Miro used a Bt848, which lacks the necessary audio capabilities being discussed). |
See also [[AVerMedia TVCapture 98]] which is another card based on the same chip. (note: <-- that statement is not necessarily true. only the later Pinnacle devices are similar, the earlier ones and Miro used a Bt848, which lacks the necessary audio capabilities being discussed). |
||
==Troubles with card=39== |
|||
I have a Pinnacle PCTV card, and I just switched from Windows to Ubuntu 7.04. I found the PCTV card did not work under linux, the dmesg shows: |
|||
<pre> |
|||
[ 48.105676] bttv0: Bt878 (rev 17) at 0000:01:00.0, irq: 21, latency: 64, mmio: 0xf8001000 |
|||
[ 48.105688] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 |
|||
[ 48.105691] bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [card=78,insmod option] |
|||
[ 48.105722] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init] |
|||
[ 48.105740] i2c-algo-bit.o: (0) scl=1, sda=1 |
|||
[ 48.105749] i2c-algo-bit.o: (1) scl=1, sda=0 |
|||
[ 48.105758] i2c-algo-bit.o: (2) scl=1, sda=1 |
|||
[ 48.105767] i2c-algo-bit.o: (3) scl=0, sda=1 |
|||
[ 48.105777] i2c-algo-bit.o: (4) scl=1, sda=1 |
|||
[ 48.105778] i2c-algo-bit.o: bt878 #0 [sw] passed test. |
|||
[ 48.106253] bttv0: using tuner=1 |
|||
[ 48.106257] bttv0: i2c: checking for TDA9875 @ 0xb0... not found |
|||
[ 48.107064] bttv0: i2c: checking for TDA7432 @ 0x8a... not found |
|||
[ 48.107885] bttv0: i2c: checking for TDA9887 @ 0x86... not found |
|||
[ 48.131522] tuner 0-004b: chip found @ 0x96 (bt878 #0 [sw]) |
|||
[ 48.131552] tda9887 0-004b: tda988[5/6/7] found @ 0x4b (tuner) |
|||
[ 48.133287] tuner 0-0060: Chip ID is not zero. It is not a TEA5767 |
|||
[ 48.133290] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) |
|||
[ 48.133312] tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) |
|||
[ 48.133315] tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) |
|||
[ 48.145587] bttv0: registered device video0 |
|||
[ 48.145620] bttv0: registered device vbi0 |
|||
[ 48.145650] bttv0: registered device radio0 |
|||
[ 48.145672] bttv0: PLL: 28636363 => 35468950 .. ok |
|||
[ 48.224927] bt878: AUDIO driver version 0.0.0 loaded |
|||
[ 48.224971] bt878: Bt878 AUDIO function found (0). |
|||
[ 48.224990] ACPI: PCI Interrupt 0000:01:00.1[A] -> GSI 21 (level, low) -> IRQ 21 |
|||
[ 48.224997] bt878_probe: card id=[0x1211bd], Unknown card. |
|||
[ 48.224998] Exiting.. |
|||
</pre> |
|||
I tried rmmod bttv but it was refused by system which said bttv is used by bt878. How can I make this card working? |
|||
Jason |
|||
Hi Jason, |
|||
The wiki is not designed as a place to ask for help -- please use the v4l mailing list for that. See the front page for instructions. Once you have the card working (and since it's a bttv card, it shouldn't be hard -- they're really well supported), write up the details on the wiki, under bttv cards. |
|||
Cheers, |
|||
Dave |
|||
Latest revision as of 19:36, 30 August 2009
Sample sox command
sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp2 -t ossdsp -w -r 32000 /dev/dsp &
Another one:
sox -t ossdsp -w -c2 -r 32000 /dev/sound/dsp1 -t ossdsp /dev/sound/dsp
Manipulating the sound source:
aumix -d /dev/mixer1 line1 R
See also AVerMedia TVCapture_98#Getting_the_sound_from_the_sound_card
Needs work...
See also AVerMedia TVCapture 98 which is another card based on the same chip. (note: <-- that statement is not necessarily true. only the later Pinnacle devices are similar, the earlier ones and Miro used a Bt848, which lacks the necessary audio capabilities being discussed).
Troubles with card=39
I have a Pinnacle PCTV card, and I just switched from Windows to Ubuntu 7.04. I found the PCTV card did not work under linux, the dmesg shows:
[ 48.105676] bttv0: Bt878 (rev 17) at 0000:01:00.0, irq: 21, latency: 64, mmio: 0xf8001000 [ 48.105688] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 [ 48.105691] bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [card=78,insmod option] [ 48.105722] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init] [ 48.105740] i2c-algo-bit.o: (0) scl=1, sda=1 [ 48.105749] i2c-algo-bit.o: (1) scl=1, sda=0 [ 48.105758] i2c-algo-bit.o: (2) scl=1, sda=1 [ 48.105767] i2c-algo-bit.o: (3) scl=0, sda=1 [ 48.105777] i2c-algo-bit.o: (4) scl=1, sda=1 [ 48.105778] i2c-algo-bit.o: bt878 #0 [sw] passed test. [ 48.106253] bttv0: using tuner=1 [ 48.106257] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 48.107064] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 48.107885] bttv0: i2c: checking for TDA9887 @ 0x86... not found [ 48.131522] tuner 0-004b: chip found @ 0x96 (bt878 #0 [sw]) [ 48.131552] tda9887 0-004b: tda988[5/6/7] found @ 0x4b (tuner) [ 48.133287] tuner 0-0060: Chip ID is not zero. It is not a TEA5767 [ 48.133290] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) [ 48.133312] tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 48.133315] tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 48.145587] bttv0: registered device video0 [ 48.145620] bttv0: registered device vbi0 [ 48.145650] bttv0: registered device radio0 [ 48.145672] bttv0: PLL: 28636363 => 35468950 .. ok [ 48.224927] bt878: AUDIO driver version 0.0.0 loaded [ 48.224971] bt878: Bt878 AUDIO function found (0). [ 48.224990] ACPI: PCI Interrupt 0000:01:00.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 48.224997] bt878_probe: card id=[0x1211bd], Unknown card. [ 48.224998] Exiting..
I tried rmmod bttv but it was refused by system which said bttv is used by bt878. How can I make this card working?
Jason
Hi Jason,
The wiki is not designed as a place to ask for help -- please use the v4l mailing list for that. See the front page for instructions. Once you have the card working (and since it's a bttv card, it shouldn't be hard -- they're really well supported), write up the details on the wiki, under bttv cards.
Cheers, Dave