Hauppauge WinTV-HVR-2250: Difference between revisions
(djh - add reference to experimental analog support) |
|||
| Line 48: | Line 48: | ||
== Making it Work == |
== Making it Work == |
||
=== Digital Support === |
|||
In September 2009, Steven Toth at [http://kernellabs.com kernellabs] submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at [[Hauppauge WinTV-HVR-2200]]. Note that support is |
In September 2009, Steven Toth at [http://kernellabs.com kernellabs] submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at [[Hauppauge WinTV-HVR-2200]]. Note that the upstream driver support is limited to DVB-T / ATSC / QAM digital TV only |
||
=== Analog support === |
|||
Experimental analog support was released by KernelLabs on July 31, 2010. See here for more details related to installing analog support: [http://www.kernellabs.com/blog/?p=1443 KernelLabs saa7164 analog announcement] |
|||
Development continues at http://www.steventoth.net/blog/products/hvr-2250/ |
Development continues at http://www.steventoth.net/blog/products/hvr-2250/ |
||
Revision as of 14:42, 4 August 2010
An ATSC PCIe card from Hauppauge.
Support for its digital side was added to Hg in September 2009.
Overview/Features
Dual hybrid digital/analog tuners, low profile.
- Single slot PCI Express (PCIe) X1 board, half height.
- Two analog tuners, each with their own hardware encoders
- Two digital TV receivers for ATSC or clear QAM
- Dual built-in hardware MPEG-2 encoders.
Components Used
- Pair of NXP TDA18271HD tuner chips.
Could someone who has this card please take a good look at the board and list all the chips here?
The REV C1F1 has:
- NXP SAA7164E/3
- Pair of Conexant CX24228-21Z demodulators
Samsung 819 K4H561638H-UCCC
The REV C2F2 has
- NXP SAA7164E/3
- Pair of Conexant CX24228-21Z demodulators
The REV C3F2 has
- NXP SAA7164E/3
- Samsung 846 - K4H561638J-LCCC - H56162YI369GDU
- Pair of Conexant CX24228-21Z - NI3W4H - 0811 KR
- 0916 - 3506 - EFE - N8578
- 24C3265I- 408(4)9E - not sure on the (4)
- Pair of LD1117 - C822
Identification
Other Images
Top view
Making it Work
Digital Support
In September 2009, Steven Toth at kernellabs submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at Hauppauge WinTV-HVR-2200. Note that the upstream driver support is limited to DVB-T / ATSC / QAM digital TV only
Analog support
Experimental analog support was released by KernelLabs on July 31, 2010. See here for more details related to installing analog support: KernelLabs saa7164 analog announcement
Development continues at http://www.steventoth.net/blog/products/hvr-2250/
Firmware
The windows driver and linux firmware extraction scripts are up on http://www.steventoth.net/linux/hvr22xx
Drivers
Drivers are expected to be included in Linux 2.6.32.
In the meantime, for stable tree hg clone http://kernellabs.com/hg/saa7164-stable/
For Development tree hg clone http://kernellabs.com/hg/~stoth/saa7164-dev/
then... make menuconfig edit as needed make make install reboot
Sample Kernel Output
provide the relevant portion of dmesg here