TerraTec Cinergy T USB Dual RC: Difference between revisions
Jump to navigation
Jump to search
(Created) |
mNo edit summary |
||
Line 68: | Line 68: | ||
iManufacturer 1 Afatech |
iManufacturer 1 Afatech |
||
iProduct 2 DVB-T 2 |
iProduct 2 DVB-T 2 |
||
iSerial 3 |
iSerial 3 xxxxxxxxxxxxxx |
||
bNumConfigurations 1 |
bNumConfigurations 1 |
||
Configuration Descriptor: |
Configuration Descriptor: |
Revision as of 20:55, 2 November 2011
Vendor Device/Model |
Supported | ID on Interface |
Hardware | Firmware | Comment / Pictures | URL | E |
---|---|---|---|---|---|---|---|
TerraTec Cinergy T USB Dual RC | ✔ Yes, in kernel since 2.6.37 | 0ccd:0099 USB2.0 | Afatech AF9013A, MaxLinear MxL5007T | dvb-usb-af9015.fw | Dual Receivers (one for viewing and one for recording TerraTec Linux Driver Information | [1] |
AF9013
USB ID: 0ccd:0099 Manufacturer: Afatech
Uses tuner MaxLinear MxL5007T and AF9013. Use Kernel-2.6.37 or v4l-dvb git.
You can find Firmware on the TerraTec Linux site ore direct at otit.fi. Copy Firmware to /lib/firmware.
After loading dvb-usb-af9015 you should see the following:
usb 2-4.2: new high speed USB device number 4 using ehci_hcd usb 2-4.2: New USB device found, idVendor=0ccd, idProduct=0099 usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-4.2: Product: DVB-T 2 usb 2-4.2: Manufacturer: Afatech usb 2-4.2: SerialNumber: xxxxxxxxxxxxxx dvb-usb: found a 'TerraTec Cinergy T Stick Dual RC' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' dvb-usb: found a 'TerraTec Cinergy T Stick Dual RC' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (TerraTec Cinergy T Stick Dual RC) af9013: firmware version:4.95.0.0 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... mxl5007t 4-00c0: creating new instance mxl5007t_get_chip_id: unknown rev (3f) mxl5007t_get_chip_id: MxL5007T detected @ 4-00c0 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (TerraTec Cinergy T Stick Dual RC) af9013: found a 'Afatech AF9013 DVB-T' in warm state. af9013: firmware version:4.95.0.0 DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)... mxl5007t 4-00c0: attaching existing instance Registered IR keymap rc-terratec-slim input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.2/rc/rc0/input8 rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.2/rc/rc0 dvb-usb: schedule remote query interval to 500 msecs. dvb-usb: TerraTec Cinergy T Stick Dual RC successfully initialized and connected. input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.2/2-4.2:1.1/input/input9 generic-usb 0003:0CCD:0099.0007: input,hidraw4: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:13.2-4.2/input1
Output from lsusb
# lsusb -vv -s 003:003 Bus 003 Device 003: ID 0ccd:0099 TerraTec Electronic GmbH Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice 2.00 iManufacturer 1 Afatech iProduct 2 DVB-T 2 iSerial 3 xxxxxxxxxxxxxx bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 71 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 65 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 10 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered)