Hauppauge WinTV-HVR-4000: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
For DVB-S/S2 there is an experimental drivers repository from Steven Toth (see www.linuxtv.org). Analog video and remote control should also work with this driver. |
|||
| ⚫ | |||
System: |
|||
== DVB-T == |
|||
| ⚫ | |||
Testsystem: |
|||
openSuSE 10.2 |
openSuSE 10.2 |
||
| Line 8: | Line 13: | ||
AMD Athlon 64 X2 3800+ |
AMD Athlon 64 X2 3800+ |
||
Modul drivers from Steven Toth for HVR 3000. ( |
Check out the Modul drivers from Steven Toth for HVR 3000. (You may also try the HVR 4000 or the multiproto repository.) |
||
Special option for cx88xx needed: |
Special option for cx88xx needed: |
||
Revision as of 14:43, 1 April 2007
For DVB-S/S2 there is an experimental drivers repository from Steven Toth (see www.linuxtv.org). Analog video and remote control should also work with this driver.
DVB-T
The DVB-T part of this card is managable to get to work.
Testsystem: openSuSE 10.2
Kernel: 2.6.18.2-34-default
AMD Athlon 64 X2 3800+
Check out the Modul drivers from Steven Toth for HVR 3000. (You may also try the HVR 4000 or the multiproto repository.)
Special option for cx88xx needed: card=56
53 did not work for the HVR-3000 repo (probably use 53 or 54 with the multiproto repo).
Add the line
"cx88xx" => "card=56",
in scripts/rmmod.pl.
Unknown which module it actually uses, so load all with
scripts/rmmod.pl debug
Then a device will be created in /dev/dvb...
Kaffeine then should find a DVB-T device
Using DVB device 0:0 "Conexant CX22702 DVB-T"
and can start a program search.
A channel list will be created and start watching TV!!