Hauppauge WinTV-NOVA-T-Stick
A DVB-T USB device from Hauppauge.
It is supported under Linux.
Overview/Features
- IR receiver
- Remote control A415-HPG-WE-A (grey top, black bottom, 45 buttons, snowboard shape) with models: 1157 G (Spain)
Components Used
- Microtune MT2060 tuner
- Dibcom DiB7700 DVB-T demodulator & USB 2.0 controller
Identification
| USB ID | Model no. | Version | Tuner | Supported from | |
|---|---|---|---|---|---|
| Device | Box | ||||
| 2040:7050 | 70001 | Model 294 | SL-294-V2.0-UK | DiB7700M | 2.6.19 |
| 2040:7060 | 70009 | Model 1132 | DiB7700P | 2.6.20 | |
| Model 308 | |||||
| Model 99063-001 ("lite" version) |
|||||
| 2040:7070 | ?? | Model 294 G (Sold in Germany as Nova-T-lite) | SL-294-V2.3-UK | DiB7070P | v4l-dvb repository, 25 January 2008 |
| (Nova-T-CE) | |||||
| Model 1157 G | SL-1157-V2.2-SP | ||||
| Nova-T-SE Model 1166 G | v4l-dvb repository, 2 February 2008 | ||||
- One model number is above the MAC address on the label on the underside of the device.
- The other model number and the version information are on the base of the box, below the bar code.
Making it work
Firmware
August 21, 2008 - New firmware file fixing the last cause for i2c errors and disconnects and providing a new, more modular i2c request formatting.
You will need the dvb-usb-dib0700-1.20.fw firmware file in /lib/firmware or the relevant place for your distribution.
You may need to change the name of the file to dvb-usb-dib0700-1.10.fw or create a link until the driver code reflects that change.
For archival purposes: dvb-usb-dib0700-1.10.fw firmware file
August 29,2008 - Issues with Firmware 1.20. Some issues have been found with the latest version of the firmware. Users may wish to continue to use 1.10 unless they have patched their v4l-dvb code with dib0700_new_i2c_api.patch.
November 15,2008 - Issues with Firmware 1.20.
- The above mentioned dib0700_new_12c_api.patch is not available discretely but is now rolled into the mercurial drivers
dvb-usb-dib0700-1.20.fw firmware fileis now stable for reception, but remote control functionality is broken; any key press is repeated until the next key is pressed. The only way to get remote control functionality presently is to roll back to 1.10 firmware and suffer the occasional disconnect.- The mercurial drivers have been changed so they now load 1.20 firmware. To revert to 1.10 firmware you need to rename your firmware file to dvb-usb-dib0700-1.20.fw or provide a link of that name.
- To avoid spurious remote control signals with 1.20 firmware, you need to edit /etc/modprobe.d/options or from Ubuntu onwards /etc/modprobe.d/options.confand add:
options dvb_usb disable-rc-polling=1
November 28,2008 - i2c errors. Changes were made to the remote control drivers on November 16,2008 to correct the repeat key problem. The card is generally stable for dual tuner reception and remote control function with Firmware 1.20.
November 10,2009 - mt2060 I2C write failed. Possible regression of a driver bug raised against Ubuntu running 2.6.27-14 and 2.6.31-2.17 causing mt2060 I2C errors in MythTV useage with firmware 1.20. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/397696 Recommend check the kernel extensions listed here for Low Noise Activation and rc_polling are loaded with correct config file name for your distribution, EIT listings information is turned off until a suitable delay (500ms-1000ms)is added to a single card (not both) and the card has correctly been added to the database as two tuners (no additional NULL entries) in the mythtv recordcard table.
If you're using a Linux kernel 2.6.23.x or earlier with its supplied DVB drivers, you will need to find dvb-usb-dib0700-01.fw or rename the above firmware file so that the driver will find it. If you rename the v1.10 firmware file, you may lose remote control support until you upgrade your drivers or kernel.
Drivers
Status on 25 January 2008
Just use Mercurial by following the "How to install DVB device drivers" instructions.
- Silence unknown keycodes
- When an unknown key code is received (from another remote, like the receiver's or the TV's), it is not eaten and the module keeps yelling about it. This patch stops the yelling.
- Jonas Anden, Thu Aug 2 00:28:17 CEST 2007
- This patch is not cleanly applicable, but it is an easy one-liner to do by hand.
- This patch is regarded as not really being the proper fix; it just limits the effect of bad behaviour.
- NOTE If you don't use the remote at all, and want to not have "unknown key code" messages in the log, the RC polling can be disabled by putting "options dvb_usb disable_rc_polling=1" in /etc/modprobe.conf
Kernel modules
dvb_usb_dib0700 38152 0 dib7000p 23560 2 dvb_usb_dib0700 dib7000m 22404 1 dvb_usb_dib0700 dvb_usb 27020 1 dvb_usb_dib0700 dvb_core 82388 2 dvb_usb dib3000mc 20232 1 dvb_usb_dib0700 dibx000_common 11780 3 dib7000p,dib7000m,dib3000mc dib0070 15236 2 dvb_usb_dib0700
Sample kernel output
This is for the 70001 version, using the driver in Linux 2.6.22.1.
usb 1-10: new high speed USB device using ehci_hcd and address 8 usb 1-10: configuration #1 chosen from 1 choice dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick). DVB: registering frontend 2 (DiBcom 7000MA/MB/PA/PB/MC)... MT2060: successfully identified (IF1 = 1220) dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
This is for the model 294 G, using the driver in Linux 2.6.23.9 with a HG of v4l-dvb from 29th of December 2007.
usb 3-5: new high speed USB device using ehci_hcd and address 80 usb 3-5: configuration #1 chosen from 1 choice dib0700: loaded with support for 5 different device-types dvb-usb: found a 'DiBcom STK7070P reference design' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' dib0700: firmware started successfully. dvb-usb: found a 'DiBcom STK7070P reference design' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (DiBcom STK7070P reference design) DVB: registering frontend 0 (DiBcom 7000PC)... DiB0070: successfully identified dvb-usb: DiBcom STK7070P reference design successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700
Specific to the model
Supported in v4l-dvb as of 18 August 2007. The 70001 version has an IR sensor, and the 70009 version is listed by Wikipedia as having one. It works with Hauppauge's 45-button remote control and will handle signals from similar remote controls.