Hauppauge WinTV-Starburst2
Jump to navigation
Jump to search
Overview/Features
Technical Details
Driver and firmware
Making it Work
dmesg output (configured as HVR-5525, using modprobe "options cx23885 card=52"):
tveeprom: Hauppauge model 150300, rev C2I9, serial# xxxxxxxxx tveeprom: MAC address is 00:0d:fe:92:xx:xx tveeprom: tuner model is unknown (idx 189, type 4) tveeprom: TV standards UNKNOWN (eeprom 0x01) tveeprom: audio processor is CX23888 (idx 40) tveeprom: decoder processor is CX23888 (idx 34) tveeprom: has no radio, has IR receiver, has no IR transmitter cx23885: cx23885[0]: warning: unknown hauppauge model #150300 cx23885: cx23885[0]: hauppauge eeprom: model=150300 cx23885: cx23885_dvb_register() allocating 1 frontend(s) cx23885: cx23885[0]: cx23885 based dvb card i2c i2c-4: Added multiplexed i2c bus 7 a8293 4-000b: Allegro A8293 SEC successfully attached m88rs6000t 7-0021: chip_id=64 m88rs6000t 7-0021: Montage M88RS6000 internal tuner successfully identified dvbdev: DVB: registering new adapter (cx23885[0]) cx23885 0000:06:00.0: DVB: registering adapter 0 frontend 0 (Montage Technology M88RS6000)... cx23885: cx23885_dvb_register() allocating 1 frontend(s) cx23885: cx23885[0]: cx23885 based dvb card si2168: probe of 4-0064 failed with error -121 cx23885: cx23885_dvb_register() dvb_register failed err = -22 cx23885: cx23885_dev_setup() Failed to register dvb on VID_C cx23885: cx23885_dev_checkrevision() Hardware revision = 0xd0 cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 4, irq: 291, latency: 0, mmio: 0xf6200000