Temporary USB Device Holding page
Info from the old DVB USB page. DO NOT ADD TO THIS PAGE! The info is to be removed and added to the appropriate sections.
Multi-purpose DVB/ATSC
TechnoTrend Budget USB1.1 (DVB-S/T/C)
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- stv0299.ko - cx22700.ko - tda1004x.ko - tda8083.ko - ves1820.ko - dvb-ttusb-budget.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- STMicroelectronics STV0299 - Conexant CX22700 - Philips TDA10046 - Philips TDA8083 - VLSI VES1820
| Device / Model | Type | Hardware | Firmware | URL / Pictures |
|---|---|---|---|---|
| Comments & quirks | ||||
| Hauppauge WinTV-NOVA-S USB | USB1.1 | [1] | ||
| Hauppauge WinTV-NOVA-T USB | USB1.1 | Philips TDA10046 | dvb-fe-tda10046.fw | [2] |
| Satelco USB-Box DVB-S/T/C | USB1.1 | Philips TDA10046 | dvb-fe-tda10046.fw | [3] |
| TechnoTrend TT-PCline USB family DVB-S/T/C | USB1.1 | Philips TDA10046 | dvb-fe-tda10046.fw | [4] |
TechnoTrend DEC Budget USB1.1 (DVB-S/T)
All devices below (except the DEC1100-T) are supported by the LinuxTV driver. The following drivers are needed for these devices:
- ttusbdecfe.ko - ttusb_dec.ko
The DECs are set-top boxes equipped with a USB port and can be used without a PC. The TV-Out can't be used for PC output.
| Device / Model | Type | Hardware | Firmware | URL / Pictures |
|---|---|---|---|---|
| Comments & quirks | ||||
| Hauppauge DEC3000-S USB (DVB-S) | USB1.1 | DEC-specific | dvb-ttusb-dec-3000s.fw | [5] |
| Hauppauge DEC2000-T USB (DVB-T) | USB1.1 | DEC-specific | dvb-ttusb-dec-2000t.fw | [6] |
| Hauppauge DEC1100-T (DVB-T) | USB1.1 | DEC-specific | [7] | |
| TV set-top box only - no PC output | ||||
| Hauppauge DEC2540-T USB (DVB-T) | USB1.1 | DEC-specific | ||
| Similar to DEC2000-T but with Conax(?) decrypt card slot. Decryption is not supported under GNU/Linux. Only sold in the Netherlands. | ||||
TechniSat/B2C2 Sky/Air/Cable2PC USB (Flexcop-based) (DVB-S/T/C / ATSC)
Most devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- stv0299.ko - stv0297.ko - mt352.ko - mt312.ko - nxt2002.ko - bcm3510.ko - b2c2-flexcop.ko - b2c2-flexcop-usb.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- STMicroelectronics STV0299 - STMicroelectronics STV0297 - Zarlink MT312 - Zarlink MT352 - NxtWave Nxt2002 - Broadcom BCM3510
| Device / Model | Type | Hardware | Firmware | URL / Pictures |
|---|---|---|---|---|
| Comments & quirks | ||||
| TechniSat/B2C2 SkyStar USB | USB1.1 | [8] | ||
| TechniSat/B2C2 SkyStar USB Plus | USB2.0 | [9] | ||
| TechniSat/B2C2 AirStar USB DVB-T | USB1.1 | [10] | ||
| Not supported?
W3ird_N3rd says that "it is detected perfectly but it is not capable of locking onto any channel, 0 channels are found. My antenna is fine and the device does work on Windows, so somehow support for this device is broken. Don't buy it till it's fixed." | ||||
| TechniSat/B2C2 AirStar USB ATSC | USB1.1 | Broadcom BCM3510 | dvb-fe-bcm3510-01.fw | [11] |
| TechniSat/B2C2 CableStar USB | USB1.1 | |||
| Discontinued | ||||