TwinHan 3506 Hybrid

This card requires a firmware file (dvb-fe-tda10046.fw) for the DVB-T demodulator.

If this card isn't detected properly, use:

   rmmod saa7134
   modprobe saa7134 card=109

If when you try and tune this card, you get i2c gate error, then you need to get the source code and compile (see How to Obtain, Build and Install V4L-DVB Device Drivers) with the following changes:

open saa7134-dvb.c and locate the following:

   static struct tda1004x_config philips_tiger_s_config = { 
       .demod_address = 0x08,
       .invert        = 1,
       .invert_oclk   = 0,
       .xtal_freq     = TDA10046_XTAL_16M,
       .agc_config    = TDA10046_AGC_TDA827X,
       .gpio_config   = TDA10046_GP01_I,
       .if_freq       = TDA10046_FREQ_045,
       .i2c_gate      = 0x4b,
       .tuner_address = 0x61,
       .tuner_config  = 2,
       .antenna_switch= 1,
       .request_firmware = philips_tda1004x_request_firmware
   };
 

Then change:

       .i2c_gate from 0x4b to 0x42

and recompile.