Hauppauge WinTV-HVR-930C

Sample Kernel Output

dmesg output:

[ 1485.814643] usb 2-1.2.5: USB disconnect, device number 6
[ 1485.814681] em28xx #0: disconnecting em28xx #0 video
[ 1485.832182] em28xx #0: V4L2 device video0 deregistered
[ 1485.834755] xc5000 1-0061: destroying instance
[ 1488.534203] usb 2-1.2.5: new high speed USB device number 9 using ehci_hcd
[ 1488.620375] usb 2-1.2.5: New USB device found, idVendor=2040, idProduct=1605
[ 1488.620378] usb 2-1.2.5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1488.620379] usb 2-1.2.5: Product: WinTV HVR-930C
[ 1488.620381] usb 2-1.2.5: SerialNumber: 4034722785
[ 1488.620625] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
[ 1488.620626] em28xx: Audio Vendor Class interface 0 found
[ 1488.620628] em28xx: Video interface 0 found
[ 1488.620629] em28xx: DVB interface 0 found
[ 1488.620714] em28xx #0: chip ID is em2884
[ 1488.672755] em28xx #0: Identified as Hauppauge WinTV HVR 930C (card=81)
[ 1488.673117] Registered IR keymap rc-hauppauge
[ 1488.673186] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.5/rc/rc2/input14
[ 1488.673251] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.5/rc/rc2
[ 1488.673864] em28xx #0: Config register raw data: 0x2a
[ 1488.673866] em28xx #0: I2S Audio (3 sample rates)
[ 1488.673867] em28xx #0: No AC97 audio processor
[ 1488.690631] em28xx #0: v4l2 driver version 0.1.3
[ 1488.712274] em28xx #0: V4L2 video device registered as video0
[ 1488.712278] em28xx-audio.c: probing for em28xx Audio Vendor Class
[ 1488.712279] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 1488.712280] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
[ 1489.863509] drxk: status = 0x439130d9
[ 1489.863512] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
[ 1491.187257] DRXK driver version 0.9.4300
[ 1491.201708] drxk: frontend initialized.
[ 1491.201727] xc5000 1-0061: creating new instance
[ 1491.202205] xc5000: Successfully identified at address 0x61
[ 1491.202206] xc5000: Firmware has not been loaded previously
[ 1491.202209] DVB: registering new adapter (em28xx #0)
[ 1491.202211] DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
[ 1491.202528] em28xx #0: Successfully loaded em28xx-dvb