Talk:Hauppauge WinTV-Aero-m

And here is what dmesg gives you when its not detecting the LG DT3305:

[    2.385654] usb 1-4.3: new high-speed USB device number 5 using ehci_hcd
[    2.471694] usb 1-4.3: New USB device found, idVendor=2040, idProduct=c61b
[    2.471696] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.471697] usb 1-4.3: Product: WinTV Aero-M
[    2.471698] usb 1-4.3: Manufacturer: Hauppauge
[    2.471699] usb 1-4.3: SerialNumber: 4034349227
[    5.928662] dvb-usb: found a 'Hauppauge WinTV-Aero-M' in warm state.
[    5.928694] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    5.928695] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    5.928696] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    5.930549] DVB: registering new adapter (Hauppauge WinTV-Aero-M)
[    6.150608] lgdt3305_read_reg: error (addr 59 reg 0001 error (ret == -121)
[    6.150613] lgdt3305_attach: error -121 on line 1144
[    6.150614] lgdt3305_attach: unable to detect LGDT3305 hardware
[    6.150620] dvb-usb: no frontend was attached by 'Hauppauge WinTV-Aero-M'
[    6.150893] dvb-usb: Hauppauge WinTV-Aero-M successfully initialized and connected.
[    6.151369] mxl111sf: MxL111SF detected, v8_200 (0x18)
[    6.173309] tveeprom 14-0050: Hauppauge model 126001, rev F1G4, serial# 7817387
[    6.173313] tveeprom 14-0050: MAC address is 00:0d:fe:77:48:ab
[    6.173314] tveeprom 14-0050: tuner model is MaxLinear 111 (idx 164, type 4)
[    6.173316] tveeprom 14-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[    6.173317] tveeprom 14-0050: audio processor is None (idx 0)
[    6.173318] tveeprom 14-0050: has no radio, has IR receiver, has no IR transmitter
[    6.173755] usbcore: registered new interface driver dvb_usb_mxl111sf

Note: that is under kernel version 3.5