KNC1 TV-Station DVB-T

From LinuxTVWiki
Revision as of 19:32, 7 March 2006 by Fox (talk | contribs) (add some info about knc1 dvb-t)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A DVB-T PCI card produced by KNC1 based on the SAA7146.

Works fine under Linux.

This card is able to deliver the full MPEG2 Transport Stream to the host.

Details

The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak).

The card also has a CI connector but it most probably isn't supported by Linux.

The card uses the budget-av driver in Linux, and requires Firmware for the TDA10046.

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=KNC1_TV-Station_DVB-T&oldid=6818"