Search results

Lock (0x1f) Quality= Good Signal= 100.00% C/N= 36.40dB UCB= 370 postBER= 28.0x10^-6 PER= 0 Lock (0x1f) Quality= Good Signal= 100.00% C/N= 36.80dB UCB= 370 postBER= 25.3x10^-6 PER= 0

...the early [[DVB-T]] [[Demodulator]]s. Worked quite well, Linux support is good. Documentation was available on the [[LSI Logic Corporation]] website these

An very good cheap analog PCI card from Mercury/Kobian. This card is also marketed now a A good Tv tuner card based on Philips/NXP saa7130 chipset with PAL tuner. May be t

...here a very cheap alternative, a simple connector that will archive a very good result. ...the picture quality I get is very good. And in any cases, prefer short and good quality cables for video signals.

...correct, there is no need to upgrade. If it's upside down, upgrading is a good idea.

...stream (i.e. reduce the MPEG-2 [[PS]] bitrate, which is most likely not a good idea as the bitrate of the transmitted signal is much less than the one of ..., i.e. the quality of the encoded video/audio signal you recieve is not as good as the original one. If you re-encode, you can only create more losses/arti

4: ppc64 is a good architecture for cross-compilation checking because it tends to use `unsign ...has been compiled with `gcc -W'. This will generate lots of noise, but is good for finding bugs like "warning: comparison between signed and unsigned".

For a good introduction to State Estimation Techniques and some links to similiar or e * [http://academic.csuohio.edu/simond/courses/eec644/kalman.pdf A good introduction paper to Kalman Filtering with sample code]

Good luck, and enjoy tv watching!

A good way of cleaning up a corrupted stream is to run it through [[MEncoder]]. Th

...lly functional. As a general recommendation, use a dual-core system to get good ATSC/SD rendering. There are known PCI issues when using older hardware.

...ther an idea for a LinuxTV graphic banner that I've been envisioning for a good long while: ...aphics designer, however, would likely be able to produce something really good. I do like the idea of a floor (as seen in the grey screen image), and some

...he more bandwidth is in theory possible. But only if the signal quality is good enough to decide between the different states because amplitude noise and p

...rds using the [[Bttv devices (bt848, bt878) | bttv]] driver - very stable, good support but no hardware MPEG Encoder; * Conexant [[cx88 devices (cx2388x) |cx88]] driver - stable, good support. A few boards have MPEG encoder;

...come to an end. Further, the mailing list is evidently shutting down for good. [http://lists.kde.org/?l=kwintv&r=1&w=2]

Good reception and quick channel switches. Works very well. Scanning for channel ...by value, however the channels work exactly the same. The T680C shows less good signal value for some channels but is better able to decode them afterwards

...uency is shifted too to 8.866 MHz instead of 4.433 MHz, it doesn't do much good there. So my original guess that the comb filter is not working was wrong,

On the other hand, high MER values doesn't guarantee for good SNR values,

...ng a good USB interface this may not be necessary (see below). You need a good antenna plugged into '''both''' of the tuner inputs (normal antenna socket

...ce of cooperating with many OEMs all over the world, getting more and more good recognition and reputation of the PCTV and IT market, own such as the Natio ...t, including 70+ high-speed SMT lines, 200 sets testing points, provides a good base for Geniatech’s producing expansion and quality stable.