Hauppauge WinTV-NOVA-T-USB2: Difference between revisions
Jump to navigation
Jump to search
(added the relevant info taken out from the NOVA-T USB article; some formating) |
Marco.hahn (talk | contribs) |
||
(3 intermediate revisions by 3 users not shown) | |||
Line 6: | Line 6: | ||
==Overview/Features== |
==Overview/Features== |
||
There are actually a couple of different variants of the device, but all should be supported |
These devices are clones of a DVB-T USB2.0 reference design made by [[DiBcom]]. There are actually a couple of different variants of the device, but all should be supported. |
||
===Components Used=== |
===Components Used=== |
||
* DiBcom 3000P |
* [[DiB3000P|DiBcom 3000P]] |
||
===Identification=== |
===Identification=== |
||
* the older variant has a USB ID of: 9300 & 9301 (for cold and warm state) |
* the older variant has a USB ID of: 9300 & 9301 (for cold and warm state) |
||
* newer variants have a USB ID of: 7050, 7070 and perhaps 7051. |
|||
It has a MAC address. |
|||
==Making it Work== |
==Making it Work== |
||
===Firmware=== |
|||
It requires the firmware file ''dvb-usb-nova-t-usb2-01.fw'' |
|||
===Drivers=== |
|||
The following drivers are needed for these devices: |
|||
- dib3000-common.ko |
|||
- dib3000mc.ko |
|||
- dvb-usb.ko |
|||
- dvb-usb-dibusb-common.ko |
|||
- dvb-usb-nova-t-usb2.ko |
|||
===Remote Control=== |
|||
The remote control is partially supported by current Linux kernels together with the abovementioned firmware and drivers. Supported are the following keys: |
|||
* numbers 0 through 9, asterisk, (#) |
|||
* arrow keys |
|||
* volume up, down |
|||
* play, record, rewind, forward, pause, (stop) |
|||
The other keys deliver scancodes above 255, which are not recognized by X11. For a solution, refer to: [http://www.mythtv.org/wiki/Remapping_remote_control_key_codes_greater_than_255] |
|||
Do not try some other solution like LIRC, this one works easiest. |
|||
==External Links== |
==External Links== |
||
* [http://www.mythtv.org/wiki/index.php/Hauppauge_WinTV_Nova-T_USB2 MythTV WinTV-NOVA-T-USB2 page] |
* [http://www.mythtv.org/wiki/index.php/Hauppauge_WinTV_Nova-T_USB2 MythTV WinTV-NOVA-T-USB2 page] |
||
[[Category:DVB-T USB Devices]] |
Revision as of 08:42, 19 October 2011
A DVB-T USB 2.0 device from Hauppauge.
It is supported under Linux since kernel 2.6.12rc3.
Overview/Features
These devices are clones of a DVB-T USB2.0 reference design made by DiBcom. There are actually a couple of different variants of the device, but all should be supported.
Components Used
Identification
- the older variant has a USB ID of: 9300 & 9301 (for cold and warm state)
It has a MAC address.
Making it Work
Firmware
It requires the firmware file dvb-usb-nova-t-usb2-01.fw
Drivers
The following drivers are needed for these devices:
- dib3000-common.ko - dib3000mc.ko - dvb-usb.ko - dvb-usb-dibusb-common.ko - dvb-usb-nova-t-usb2.ko
Remote Control
The remote control is partially supported by current Linux kernels together with the abovementioned firmware and drivers. Supported are the following keys:
- numbers 0 through 9, asterisk, (#)
- arrow keys
- volume up, down
- play, record, rewind, forward, pause, (stop)
The other keys deliver scancodes above 255, which are not recognized by X11. For a solution, refer to: [1]
Do not try some other solution like LIRC, this one works easiest.