Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] [Fwd: tcm universal remote control + lirc]
- To: linux vdr mailinglist <vdr@linuxtv.org>
- Subject: [vdr] [Fwd: tcm universal remote control + lirc]
- From: Clemens Kirchgatterer <clemens@root.at>
- Date: Thu, 06 Dec 2001 12:48:16 +0100
- Content-Transfer-Encoding: 7bit
- Content-Type: text/plain; charset=us-ascii; format=flowed
- Delivered-To: mhonarc@limes.convergence.de
- Reply-to: vdr@linuxtv.org
- Sender: vdr-bounce@linuxtv.org
- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.3) Gecko/20010816
martin bitz kindly sent me his lirc conf. (nochmals danke an dieser
stelle.) due to his unknown preblems with the vdr mailing list i send it
to the mailinglist, so it will hopefully show up in the archives.
-------- Original Message --------
Subject: tcm universal remote control + lirc
Date: Thu, 06 Dec 2001 07:56:47 -0500
From: Bitz-Loetsysteme@t-online.de (Martin Bitz)
To: clemens@root.at
>i just got this cool remote control (labled: [TCM] 96518) with extrem
>many buttons ;-), and wondered if anybody is using this allready with
>vdr and lirc. if so, can you please send my your lirc description file
>and tell my to what code i should program the remote?
>many thanx ...
>clemens
Hello.
I don't know if your request for a lirc.conf-file is already
fullfilled because I have lot's of problems getting an actual
mailing-list from linuxTV.org. Don't know why.
If not, here's mine:
# Copyright (C) 1999 Christoph Bartelmus
#
# You may only use this file if you make it available to others,
# i.e. if you send it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.6.4(irman) on Sat Nov 3 12:41:24 2001
#
# contributed by
#
# brand: TCM-387.conf
# model no. of remote control:
# supported devices:
#
begin remote
name TCM-387
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 16
pre_data 0xFFFF
post_data_bits 32
post_data 0x0
gap 209846
min_repeat 1
toggle_bit 0
begin codes
Power 0x0000000000007590
1 0x0000000000007540
2 0x0000000000007570
3 0x0000000000007560
4 0x0000000000007510
5 0x0000000000007500
6 0x0000000000007530
7 0x0000000000007520
8 0x00000000000075D0
9 0x00000000000075C0
0 0x0000000000007550
Mute 0x0000000000007580
Menu 0x0000000000007690
Back 0x0000000000000B90
Ok 0x00000000000075F0
Left 0x0000000000000A40
Right 0x0000000000000A70
Up 0x0000000000007700
Down 0x0000000000007760
Red 0x0000000000000810
Yellow 0x0000000000000870
Blue 0x0000000000000840
Green 0x0000000000000860
rec 0x00000000000077F0
pause 0x0000000000000B80
vt1 0x00000000000075A0
vt2 0x0000000000000B90
vt3 0x0000000000007690
vt4 0x00000000000077C0
vt5 0x00000000000077B0
ab 0x00000000000077D0
return 0x00000000000075F0
Vol- 0x0000000000007440
Vol+ 0x0000000000007450
chan+ 0x0000000000007750
chan- 0x0000000000007740
showview 0x0000000000007750
end codes
end remote
This is the conf-file for TMC-code 387.
Probably you need to rename some buttons.
All buttons deliver differnt codes except the following:
Button "Menu" is identical with button "vt3"
Button "Back" is identical with button "vt2"
I hope this is a help to you.
Maybe you want to post that mail to the vdr-list if your question wasn't
answered before.
If you've got any more questions about that conf-file, just send me a
mail. I would be glad to help you.
regards Martin
Home |
Main Index |
Thread Index