[vdr] Re: final solution to the signalless operation problemfound!! -> testers+RFC required

[Guido Fiala <gfiala@s.netic.de>]

On Friday 16 April 2004 17:28, Oliver Endriss wrote:
> On Thursday 25 March 2004 01:06, Oliver Endriss wrote:
> > BTW, I tested no-signal operation with a DVB-S 1.3 and a DVB-S 2.1.
> > The 1.3 always crashes after a short time while the 2.1 has no problems
> > at all. I'll have a look on the tuner output with an oscilloscope as
> > soon as my time permits.
>
> Ok, I did some *no-signal* measurements with a rev. 1.3 and a rev. 2.1
> board. With the 1.3 tuner you can see pulses on tuner pins 24/25/26,
> while the 2.1 tuner mutes these signals (constant low or high).

Thanks for the test. These pins are the av711x ones i assume?
As i had a look at the ves-spec and they didn't fit. 
Just wanted to know which pins and registers they correspond in the FE...

Guido



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.