Hauppauge WinTV-NOVA-S USB: Difference between revisions
Jump to navigation
Jump to search
m (fixed links) |
(some formatting etc) |
||
| Line 1: | Line 1: | ||
[[image:Hauppauge WinTV-NOVA-S USB.jpg|thumb|Hauppauge WinTV-NOVA-S USB]] |
|||
| ⚫ | |||
A [[DVB-S]] [[DVB-S USB Devices|USB 1.1 device]] designed by [[TechnoTrend]] and sold by [[Hauppauge]]. |
|||
It is supported under Linux. |
|||
| ⚫ | |||
==Overview/Features== |
|||
| ⚫ | |||
Due to the limited [[Universal Serial Bus|USB 1.1]] [[Bus Bandwidth]] of about 12MBit only selected [[PID]]s can get transferred over the USB Bus to the Host. Some High-Bandwidth [[Transponder]]s don't work. |
Due to the limited [[Universal Serial Bus|USB 1.1]] [[Bus Bandwidth]] of about 12MBit only selected [[PID]]s can get transferred over the USB Bus to the Host. Some High-Bandwidth [[Transponder]]s don't work. |
||
===Components Used=== |
|||
Linux driver exists. Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. A similiar [[DVB-T]] device is available, the [[Hauppauge WinTV-NOVA-T USB|WinTV-NOVA-T USB]]. |
|||
| ⚫ | |||
* [[TI AV711x|Texas Instruments AV711x]] [[DSP]] |
|||
==Making it Work== |
|||
Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. |
|||
==External Links== |
|||
[[Category:DVB-S]] |
[[Category:DVB-S]] |
||
Revision as of 20:38, 8 November 2008
A DVB-S USB 1.1 device designed by TechnoTrend and sold by Hauppauge.
It is supported under Linux.
Overview/Features
Based on a Texas Instruments DSP that remultiplexes the stream into a TechnoTrend-proprietary USB packet format and sends it as Isochronous USB Stream over the USB Bus.
Due to the limited USB 1.1 Bus Bandwidth of about 12MBit only selected PIDs can get transferred over the USB Bus to the Host. Some High-Bandwidth Transponders don't work.
Components Used
- Either the TDA8083 or STV0299 demodulator is used.
- Texas Instruments AV711x DSP
Making it Work
Requires a Firmware that needs to get peeled out of the Windows Driver.