Hauppauge WinTV-NOVA-S USB: Difference between revisions
m (fixed image link) |
(added the relevant info from the old "Temporary USB Devices" article) |
||
| Line 5: | Line 5: | ||
==Overview/Features== |
==Overview/Features== |
||
This device is a rebadge of the DVB-S member of TechnoTrend's TT-PCline USB family of devices, which were USB1.1 based and of the, so called, "budget" category. |
|||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
| ⚫ | Due to the limited [[Bus Bandwidth|bus bandwidth]] provided by [[Universal Serial Bus|USB 1.1]], of approximately 12Mbps, only selected [[PID]]s can be transferred over USB to the host system. Consequently, some high bandwidth [[Transponder|transponders]] won't work, and [[HDTV]] reception is not possible. |
||
===Components Used=== |
===Components Used=== |
||
* Either the [[Philips TDA8083|TDA8083]] or [[STMicroelectronics STV0299|STV0299]] [[Demodulator|demodulator]] is used |
* Either the [[Philips]] [[Philips TDA8083|TDA8083]] or [[STMicroelectronics]] [[STMicroelectronics STV0299|STV0299]] [[Demodulator|demodulator]] is used |
||
* [[ |
* a [[Texas Instruments]] [[DSP]] (USB bridge) |
||
===Identification=== |
|||
output of ''lsusb -v'': |
|||
==Making it Work== |
==Making it Work== |
||
===Firmware=== |
|||
Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. |
Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. |
||
===Drivers=== |
|||
The following drivers are needed for these devices: |
|||
- stv0299.ko |
|||
- tda8083.ko |
|||
- dvb-ttusb-budget.ko |
|||
==External Links== |
==External Links== |
||
Revision as of 01:15, 15 November 2008
A DVB-S USB 1.1 device designed by TechnoTrend and sold by Hauppauge.
It is supported under Linux.
Overview/Features
This device is a rebadge of the DVB-S member of TechnoTrend's TT-PCline USB family of devices, which were USB1.1 based and of the, so called, "budget" category.
It uses a Texas Instruments DSP that remultiplexes the stream into a TechnoTrend-proprietary USB packet format and sends it as Isochronous USB Stream over the bus.
Due to the limited bus bandwidth provided by USB 1.1, of approximately 12Mbps, only selected PIDs can be transferred over USB to the host system. Consequently, some high bandwidth transponders won't work, and HDTV reception is not possible.
Components Used
- Either the Philips TDA8083 or STMicroelectronics STV0299 demodulator is used
- a Texas Instruments DSP (USB bridge)
Identification
output of lsusb -v:
Making it Work
Firmware
Requires a Firmware that needs to get peeled out of the Windows Driver.
Drivers
The following drivers are needed for these devices:
- stv0299.ko - tda8083.ko - dvb-ttusb-budget.ko