Hauppauge WinTV-HVR-4400

A hybrid DVB-S2 PCI card from Hauppauge with a PCIe 1x interface. Model 1357.

Not yet supported (Aug 2010).

There is no support currently for this card, and since it uses a demodulator for which there is not currently a driver, much more work will be required than simply adding a new board profile.

Overview/Features

Quad-mode HD TV tuner featuring DVB-S2 HDTV, DVB-S, DVB-T, FM radio, analogue PAL/SECAM aerial TV, and S-Video, Composite and stereo audio inputs for A/V capture, and additional S-Video, Composite and stereo audio (which require separate back plane plug set, not included in the box).

Also includes black IR remote control, batteries, and IR remote control receiver with plug on rear of card.

Sockets: TV, SAT, IR, Combo socket for dongle for S-Video, composite and stereo audio.

Components Used

Soon to be discovered.

Identification

02:00.0 Multimedia video controller: Conexant Unknown device 8880 (rev 04)
        Subsystem: Hauppauge computer works Inc. Unknown device c108
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fda00000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: [40] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <2us, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vital Product Data
        Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000

Making it Work

Feel free to add what you know.