Hauppauge WinTV-NOVA-S USB: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
Due to the limited [[USB1.1]] [[Bus Bandwidth]] of about 12MBit only selected [[PID]]s can get transferred over the USB Bus to the Host. Some High-Bandwidth [[Transponder]]s don't work. |
Due to the limited [[USB1.1]] [[Bus Bandwidth]] of about 12MBit only selected [[PID]]s can get transferred over the USB Bus to the Host. Some High-Bandwidth [[Transponder]]s don't work. |
||
Linux driver exists. Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. |
Linux driver exists. Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. A similiar [[DVB-T]] device is available, the [[WinTV-NOVA-T USB]]. |
||
A similiar [[DVB-T]] device is available, the [[WinTV-NOVA-T USB]]. |
|||
Revision as of 16:15, 19 September 2004
A USB1.1 DVB-S device designed by Technotrend and sold by Hauppauge. Based on a Texas Instruments DSP that remultiplexes the stream into a Technotrend-proprietary USB packet format and sends it as Isochronous USB Stream over the USB Bus.
As decoder a TDA8083 or a STV0299 is used.
Due to the limited USB1.1 Bus Bandwidth of about 12MBit only selected PIDs can get transferred over the USB Bus to the Host. Some High-Bandwidth Transponders don't work.
Linux driver exists. Requires a Firmware that needs to get peeled out of the Windows Driver. A similiar DVB-T device is available, the WinTV-NOVA-T USB.